Lexmark M3150 User manual

Menu Map
Menus list
Paper Menu Reports Network/Ports
Default Source
Paper Size/Type
Configure MP
Substitute Size
Paper Texture
Paper Weight
Paper Loading
Custom Types
Custom Names1
Universal Setup
Menu Settings Page
Device Statistics
Network Setup Page2
Profiles List
Print Fonts
Print Directory
Print Demo
Asset Report
Active NIC
Standard Network3
Reports
Network Card
TCP/IP
IPv6
Wireless
AppleTalk
Standard USB
Parallel4
SMTP Setup
Security Settings Help
Miscellaneous Security Settings4
Confidential Print
Disk Wiping4
Security Audit Log
Set Date and Time
General Settings
Flash Drive Menu4
Print Settings
Print All Guides
Print Quality
Media Guide
Print Defects Guide
Menu Map
Information Guide
Connection Guide
Moving Guide
Supplies Guide
1This menu appears only in touch‑screen printer models.
2Depending on the printer setup, this menu item appears as Network Setup Page or Network [x] Setup Page.
3Depending on the printer setup, this menu item appears as Standard Network or Network [x].
4This feature is available only in select printer models.
Menu Map
Page 1 of 4

Using the printer control panel
1234
5
6
7
Use the To
1Display •View the printer status and messages.
•Set up and operate the printer.
2Home button Go to the home screen.
3Keypad Enter numbers, letters, or symbols.
4Sleep button Enable Sleep mode or Hibernate mode.
The following actions wake the printer from Sleep mode:
•Touching the screen
•Pressing any hard button
•Opening a tray or the front door
•Sending a print job from the computer
•Performing a power‑on reset using the main power switch
•Attaching a device to the USB port
5Stop or cancel button Stop all printer activity.
6Indicator light Check the status of the printer.
7USB port Connect a flash drive to the printer.
Note: Only the front USB port supports flash drives.
Understanding the colors of the Sleep button and indicator lights
The colors of the Sleep button and indicator lights on the printer control panel signify a certain printer status or condition.
Indicator light color and its corresponding printer status
Indicator light Printer status
Off The printer is off or in Hibernate mode.
Blinking green The printer is warming up, processing data, or printing.
Solid green The printer is on, but idle.
Blinking red The printer requires user intervention.
Menu Map
Page 2 of 4

Sleep button light color and its corresponding printer status
Sleep button light Printer status
Off The printer is off, idle or in Ready state.
Solid amber The printer is in Sleep mode.
Blinking amber The printer is entering or waking from Hibernate mode.
Blinking amber for 0.1 second, then goes
completely off for 1.9 seconds in a slow, pulsing
pattern
The printer is in Hibernate mode.
Understanding the home screen
When the printer is turned on, the display shows a basic screen, referred to as the home screen. Use the home screen buttons
and icons to initiate an action.
Note: Your home screen may vary depending on your home screen customization settings, administrative setup, and active
embedded solutions.
1234
5
6
7
8
Touch To
1Change Language Change the primary language of the printer.
2Bookmarks Create, organize, and save a set of bookmarks (URLs) into a tree view of folders and file links.
Note: The tree view does not include bookmarks created within Forms and Favorites, and the ones in
the tree are not usable in Forms and Favorites.
3Held Jobs Display all current held jobs.
4USB View, select, or print photos and documents from a flash drive.
Note: This icon appears only when you return to the home screen while a memory card or flash drive
is connected to the printer.
5Menus Access printer menus.
Note: These menus are available only when the printer is in ready state.
6Status message bar •Show the current printer status such as Ready or Busy.
•Show printer conditions such as Imaging unit low or Cartridge Low.
•Show intervention messages and the instructions on how to clear them.
Menu Map
Page 3 of 4

Touch To
7Status/Supplies •Show a printer warning or error message whenever the printer requires intervention to continue
processing.
•View more information on the printer warning or message, and on how to clear it.
8Tips View a context‑sensitive help information.
This may also appear on the home screen:
Touch To
Search Held Jobs Search current held jobs.
Jobs by user Access print jobs saved by user.
Profiles and Solutions Access profiles and solutions.
Features
Feature Description
Attendance message alert If an attendance message affects a function, then this icon appears and the red indicator
light blinks.
Warning If an error condition occurs, then this icon appears.
Printer IP address
Example: 123.123.123.123
The IP address of your printer is located at the top left corner of the home screen and
appears as four sets of numbers separated by periods. You can use the IP address when
accessing the Embedded Web Server to view and remotely configure printer settings even
when you are not physically near the printer.
Menu Map
Page 4 of 4