Lexmark MS410 series User manual

Lexmark MS410 Series
Machine Type 4514-420, -430
Service Manual
•Start diagnostics
•Maintenance
•Safety and notices
•Trademarks
•Index
October 17, 2012 www.lexmark.com
P/N 12G2879

Parts catalog
Legend
The following column headings are used in the parts catalog:
•Asm‑index—Identifies the item in the illustration.
•Part number—Identifies the unique number that correlates with the part.
•Units/mach—Refers to the number of units actually used in the base machine or product.
•Units/FRU—Refers to the number of units in a particular FRU.
•Description—A brief description of the part.
The following abbreviations are used in the parts catalog:
•NS (not shown) in the Asm‑index column indicates that the part is procurable but is not pictured in the illustration.
•PP (parts packet) in the Description column indicates that the part is contained in a parts packet.
4514-420, -430
Parts catalog
226

Assembly 1: Covers
3
6
4
7
8
9
10
11
5
2
12 1
4514-420, -430
Parts catalog
227

Assembly 1: Covers
Asm-index P/N Units/mach Units/FRU Description Removal procedure
1 40X8520 1 1 Dust cover (250‑sheet tray) “Dust cover removal” on page 207
2 40X8054 1 1 Rear door and cover “Rear door and cover removal” on
page 207
3 40X8052 1 1 Right cover “Right cover removal” on page 162
4 40X8056 1 1 Front access cover “Front access cover removal” on
page 186
5 40X9148 1 1 Cartridge plunger “Cartridge plunger removal” on
page 171
6 40X8303 1 1 250-sheet tray N/A
7 40X8302 1 1 MPF assembly (50 sheets) “MPF assembly removal” on
page 178
8 40X8051 1 1 Nameplate “Nameplate removal” on page 175
9 40X8059 1 1 Control panel assembly
Note: Does not include the UICC.
“Control panel assembly removal”
on page 175
“UICC removal” on page 177
10 40X8064 1 1 Bezel (MS410d) “Bezel removal” on page 174
10 40X8065 1 1 Bezel (MS410dn) “Bezel removal” on page 174
11 40X8053 1 1 Left cover “Left cover removal” on page 146
12 40X8055 1 1 Top cover “Top cover removal” on page 212l
4514-420, -430
Parts catalog
228

Assembly 2: Electronics 1
1
2
3
4
5
7
8
9
6
4514-420, -430
Parts catalog
229

Assembly 2: Electronics 1
Asm-index P/N Units/mach Units/FRU Description Removal procedure
1 40X8081 1 1 Laser scanning unit “Laser scanning unit (LSU) removal” on
page 213
2 40X8343 1 1 Fuser, 100 V “Fuser removal” on page 211
2 40X8023 1 1 Fuser, 110 V “Fuser removal” on page 211
2 40X8024 1 1 Fuser, 220 V “Fuser removal” on page 211
3 40X8050 1 1 Narrow media/bin full sensor “Narrow media/bin full sensor removal”
on page 208
4 40X8276 1 1 Cooling fan “Cooling fan removal” on page 163
5 40X8027 1 1 Controller board (MS410d) “Controller board removal” on page 164
5 40X8028 1 1 Controller board (MS410dn) “Controller board removal” on page 164
6 40X8280 1 1 Front input guide “Front input guide removal” on page 187
7 40X8300 1 1 MPF solenoid “MPF solenoid removal” on page 149
8 40X8301 1 1 Reverse solenoid “Reverse solenoid removal” on page 154
9 40X8291 1 1 Control panel assembly “Control panel assembly removal” on
page 175
“UICC removal” on page 177
4514-420, -430
Parts catalog
230

Assembly 3: Electronics 2
4
3
2
1
6
5
4514-420, -430
Parts catalog
231

Assembly 3: Electronics 2
Asm-index P/N Units/mach Units/FRU Description Removal procedure
1 40X8048 1 1 Front door sensor “Front door sensor removal” on
page 186
2 40X8266 1 1 Toner cartridge smart chip contact “Toner cartridge smart chip contact
removal” on page 165
3 40X8046 1 1 Toner density sensor “Toner density sensor removal” on
page 196
4 40X7795 1 1 Power supply, 100 V/110 V “Power supply removal” on page
191
4 40X7796 1 1 Power supply, 220 V “Power supply removal” on page
191
5 40X8047 1 1 Trailing edge sensor “Trailing edge sensor removal” on
page 197
6 40X8043 1 1 Duplex sensor and input sensor “Duplex sensor and input sensor
removal” on page 194
4514-420, -430
Parts catalog
232

Assembly 4: Frame
2
4
5
6
8
9
10
12
13
11
7
1
3
3
4514-420, -430
Parts catalog
233

Assembly 4: Frame
Asm-index P/N Units/mach Units/FRU Description Removal procedure
1 40X8393 1 1 Transfer roll “Transfer roll removal” on page 170
2 40X8298 1 1 Redrive assembly “Redrive assembly removal” on
page 210
3 40X8299 1 1 Front mounts “Left front mount removal” on
page 167
“Right front mount removal” on
page 168
4 40X8275 1 1 Duplex assembly “Duplex removal” on page 193
5 40X8296 2 1 Pick tire N/A
6 40X8260 1 1 ACM assembly “ACM assembly removal” on
page 202
7 40X8295 1 1 MPF pick roller and Separator pad “MPF pick roller removal” on
page 181
“Separator pad removal” on page
189
8 40X8279 1 1 Jam access cover “Jam access cover removal” on
page 182
9 40X8278 1 1 MPF gearbox “MPF gearbox removal” on page
151
10 40X8277 1 1 Duplex gear assembly “Duplex gear assembly removal” on
page 160
11 40X8265 1 1 ACM clutch “ACM clutch removal” on page 155
12 40X8083 1 1 Cartridge gearbox “Cartridge gearbox removal” on
page 160
13 40X8085 1 1 Main drive gearbox “Main drive gearbox removal” on
page 147
NS 40X8394 1 1 Screw kit N/A
4514-420, -430
Parts catalog
234