
- 22 - - 23 - - 24 - - 25 - - 26 - - 27 -
- 29 -- 28 - - 30 - - 31 - - 32 - - 33 - - 34 -
- 21 -
- 35 - - 36 - - 37 - - 38 - - 39 - - 40 - - 41 -
■■IC■card■opener■for■LGV35■(sample)
Don’t
The■end■of■the■IC■card■opener■for■LGV35■(sample)■is■
sharp.■Do■not■use■pointed■at■yourself■or■other■people.
May hit yourself or other people resulting in injuries or loss of sight.
Do
The■use■of■the■product■may■cause■itching,■rashes,■
eczema,■or■other■symptoms■depending■on■the■user's■
physical■condition.■If■you■develop■skin■problems,■stop■
using■the■product■immediately,■and■see■a■doctor.
For materials of parts →P.24 "Material list"
Do
Store■in■a■place■where■small■children■cannot■reach.
If it is accidentally swallowed, it might result in suocation
or injuries.
■■Transparent■cover■(sample)
Don’t
Do■not■get■your■ngers■caught■when■attaching■the■
transparent■cover■(sample).
May cause injuries, etc.
Do
If■you■feel■any■abnormality■with■your■skin,■immediately■
consult■a■dermatologist.
Itching, rashes, eczema, etc. sometimes occurs depending
on your physical constitution and condition.
For materials of parts →P.24 "Material list"
■■Cleaning■cloth■(sample)
Do
If■you■feel■any■abnormality■with■your■skin,■immediately■
consult■a■dermatologist.
Itching, rashes, eczema, etc. sometimes occurs depending
on your physical constitution and condition.
For materials of parts →P.24 "Material list"
■■Use■of■this■product■near■medical■equipment■and■inside■a■
medical■facility
Do
Wearers■of■medical■equipment■such■as■implanted■
pacemakers■or■debrillators■must■carry■and■use■the■
product■at■least■15■cm■away■from■the■implanted■
device.
The product's signals may aect the performance of
electronic medical equipment.
Do
When■electronic■medical■equipment■other■than■
implanted■pacemakers■or■debrillators■are■in■use■
outside■of■medical■facilities■(such■as■in■home■care■
settings),■check■with■the■device■manufacturer■to■
determine■how■the■device■is■aected■by■electrical■
signals.
The product's signals may aect the performance of
electronic medical equipment.
Do
Make■sure■that■the■product■will■not■emit■any■signals■
(turn■o■power,■put■it■in■Airplane■mode,■etc.)■if■within■
15■cm■of■those■around■you,■such■as■where■crowded■
and■you■cannot■move■freely.
Wearers of implanted pacemakers or debrillators may be
nearby. The product's signals may aect the performance of
electronic medical equipment.
Do
Obey■rules■inside■medical■facilities■regarding■use■of■
the■terminal■in■such■facilities.
The product's signals may aect the performance of
electronic medical equipment.
■■Laser■Safety■Statement
This product employs a laser system. To ensure proper use of this
product, please read this owner's manual carefully and retain for
future reference. Should the unit require maintenance, contact the
Customer Service Center or Repair and Delivery Service Center
Use of controls, adjustments, or the performance of procedures
other than those specied herein may result in hazardous radiation
exposure. To prevent direct exposure to laser beam, do not try to
open the enclosure or make direct contact with the laser.
Material list
<Main unit>
Part Material Surface treatment
Outer case (front, top and
bottom)
Aluminum Anodic oxidation
treatment
Outer case (rear)
Reinforced glass
Film laminate +
Steamed
Outer case (front, left and
right)
Aluminum Anodic oxidation
treatment
Display
Reinforced glass
Film laminate +
Black printing
USB connection terminal Aluminum Anodic oxidation
treatment
Earpiece (receiver) STS PVD coating
Volume key Aluminum Anodic oxidation
treatment
Card tray Aluminum Anodic oxidation
treatment
Exterior case decoration (top
and bottom, left and right)
PC resin -
Camera lens decoration
(inside)
Reinforced glass
-
Camera lens decoration
(outside)
Aluminum Anodic oxidation
treatment
Camera lens
Reinforced glass
-
Flash Transparent PC
resin
-
Power key decoration Aluminum Anodic oxidation
treatment
Power
key
Cloud Silver, Aurora
Black
Epoxy resin Urethane coating
Moroccan Blue Epoxy resin Acrylic coating
<LG TV antenna cable 01>
Part Material Surface treatment
Earphone jack (body) TPE resin -
Cable TPE resin -
Connecting plug (body) TPE resin -
Connecting plug (metal
parts)
Brass Gold plating
<IC card opener for LGV35 (sample)>
Part Material Surface treatment
Main unit SUS304 -
<Transparent cover (sample)>
Part Material Surface treatment
Main unit PC resin UV coating
<Cleaning cloth (sample)>
Part Material Surface treatment
Main unit Polyester 70%,
Nylon 30%
-
Handling Precautions
These■precautions■are■provided■to■prevent■damage■to■the■
product■and■ensure■that■performance■can■be■fully■demonstrated.
Thoroughly■read■these■precautions■to■ensure■correct■use.
■■Precautions■common■to■the■main■unit,■internal■battery,■
charging■equipment,■au■IC■Card,■LG■TV■antenna■cable■01,■
IC■card■opener■for■LGV35■(sample),■transparent■cover■
(sample),■cleaning■cloth■(sample),■peripheral■devices
●Do not apply excessive force to the product during use. Be
sure not to put the product into a tightly packed bag or place a
heavy object on the product in a bag. Sitting on the product in
your pocket might damage the display or internal circuit board
resulting in a malfunction.
Keeping an external device connected to the external connector
or earphone jack might damage the connector resulting in a
malfunction. Such damage and malfunction are not covered by
the warranty, even if there is no external damage.
●To ensure waterproof property (equivalent to IPX5 and IPX8) of
this product, use the product with the card tray tightly closed.
Note that the waterproof property is not guaranteed in every
usage condition. Do not allow water to get inside the product or
splash water on the charging equipment or optional accessories.
Do not attach/remove the card tray in the rain or with water
drops on the surface of the product. May cause water intrusion
resulting in internal corrosion.
Malfunctions determined to be caused by water intrusion are not
covered by the warranty.
●Do not use the product in extremely hot, cold or humid places.
(Use within an ambient temperature range of 5℃ to 35℃ and
humidity range of 35% to 85%.)
- Charging equipment
- Peripheral devices
●Do not use the product in extremely hot, cold or humid places.
(Use within an ambient temperature range of 5℃ to 35℃ and
humidity range of 35% to 85%. However it can be provisionally
used if it is 36℃ to 40℃ .)
- isai V30+ main unit
- au IC Card (when attached to the product unit)
●Do not use in places subject to lots of dust or vibration. May
cause malfunction.
●Occasionally clean the external connection terminal and
earphone terminal with a dry cotton bud. Dirty terminals may
result in a poor connection. Also do not forcefully clean the
terminals as this may deform them.
●Clean the product with cleaning cloth (sample) or a soft dry
cloth (such as the type used for eyeglasses). Forceful rubbing
with a dry cloth may scratch the display. The display may be
stained if splash or smear is left attached to the surface. Wiping
the product using alcohol, thinner, benzene, detergent, glass
cleaner, etc. might erase the printing on the outer casing or
cause malfunction.
●Use as far away as possible from land-line phones, TVs, and
radios. Use nearby might aect them.
●The product may become warm while charging etc., depending
on the situations, but this is not abnormal.
●Do not place near corrosive chemicals or in places where
corrosive gas is generated. May cause malfunction.
●Do not use outside when you can hear thunder. May risk
lightning strikes and electric shock.
●Be sure to use only the specied peripheral devices. Use of
other devices might cause malfunction.
●Do not put the product into a heating cooking device such as a
microwave oven or high-pressure container. May cause malfunction.
●The customer is not allowed to disassemble, modify or repair the
product. May cause malfunction. Modication of the product is in
violation of the Radio Law and Telecommunication Business Act.
●Do not allow conductive foreign objects (metal fragments, pencil
leads, etc.) to come into contact with or get inside the connection
terminal, earphone terminal, etc. to avoid the connection terminal,
earphone microphone terminal, etc. from short-circuit.
●If the product gets wet while charging, immediately disconnect
the power plug of the specied charger (sold separately).
●Do not use while driving a car or riding a motorbike or bicycle
or while walking. Use while driving a car or riding a motorbike is
prohibited by law. Use of a cell phone while riding a bicycle may
be punishable by some regulations.
●Using or charging the product inside a bag or covered with
bedding, etc. may cause malfunction.
●When using a charging equipment or external device, insert/
remove the connector straight to/from the terminal. Make sure
the orientation of the connector. Unless it's correct, it may
cause malfunction.
●Do not expose the camera lens to direct sunlight for an
extended period. May cause malfunction.
●Do not store or leave the product in places subject to direct
sunlight (e.g. in automobiles), places that get hot, places that get
extremely cold, or in humid or dusty places. May cause malfunction.
●Do not leave the equipment on unstable or sloping surfaces.
Be careful especially while charging or the vibrator is set. The
product might fall causing malfunction.
●Do not use power outlets or wiring apparatus beyond its rating
when charging the product, for example, by connecting multiple
devices to a single power strip.
■■Main■unit
●The product's battery is built in, and cannot be replaced by
the customer. For battery replacement, contact an au shop or
Customer Service Center.
●Do not forcefully press, strike, or intentionally subject the display
to strong impact. May cause scratching or damage.
●Do not forcefully press your ngernails, sharp objects, or hard
objects against keys or display surface. May cause scratching
or damage.
●The touch panel is designed to be lightly touched by ngers.
Do not apply strong pressure with your ngers or sharp-pointed
objects (such as ngernails, ballpoint pens, and pins) on the
touch panel.
●In the following cases, the touch panel may not work even if you
touch it. Note that it may cause malfunction.
Operation with gloved hands / Operation with ngernails /
Operation with a foreign object placed on the touch panel /
Operation with a protective sheet or sticker on the touch panel /
Operation with water drops left or frozen on the surface / Operation
with wet or sweaty ngers / Operation under water
●Never use modied products. Use of a modied device violates
the Radio Law and Telecommunications Business Law.
The product has acquired the certication of conformity with
technical regulations for the specied radio station based on
the Radio Law, and to such regulations as technical conformity
based on the Telecommunications Business Law. And the
"Technical Conformity Mark
" is checkable on the product as a
certicate.
<<How to check>>
On the Home screen u [Settings] u "General" tab u [Regulatory
& safety]
If the product is modied, technical standard compliance
becomes invalid.
Never use the product without the valid certication. Doing so
violates the Radio Law and Telecommunications Business Law.
●Take care not to place magnetized items such as magnetic
cards, speakers and TV sets near the product, as it might cause
malfunction. Putting a strong magnetism close to the product
might cause false operation.
●Do not bring magnetic cards such as cash cards, credit cards,
and prepaid cards near to the product. May result in loss of
recorded information.
●When you put the product in your pocket or bag, take care so that
the display does not come in contact with metal objects or other
hard objects. May cause scratching or damage. Also, be careful
not to scratch or damage the display by using a strap whose
metal or other hard part comes in contact with the display.
●When suddenly brought into a warm place from a cold place,
or when in a humid location, or when used where temperature
suddenly changes such as near the air discharge port of an air
conditioner, water droplets (i.e. condensation) sometimes form
inside the product. Note that when used under conditions such
as this, the humidity might cause corrosion or a fault.
●While writing/reading data to/from a microSD memory card, do
not subject the product to vibration or impact or turn o the
power. May cause loss of data or a fault.
●Do not cover the illuminance sensor with your nger or put a
sticker on it. May hinder the sensor from detecting the ambient
light level and functioning correctly.
●When you put a sticker, etc. on the proximity sensor, the sensor
will malfunction and indications on the display will turn o at all
times while receiving or making a call. In this case, note that you
may not be able to operate the product.
●Use the product with the card tray, etc. closed. If the covers are
open, dirt or water may get inside causing malfunction.
●Do not allow liquids, metal objects, and other foreign matter to
get inside the au IC Card and microSD memory card slot inside
the product. May cause malfunction.
●Do not drop, throw, or step on the product or give a strong force
or vibration to it. May cause malfunction.
●Do not place the product directly on sand at a beach, etc.
Sand or other small particles might get inside the earpiece,
microphone or speaker etc., causing the volume to drop. If sand
gets inside the product's main unit, it might cause malfunction.
■■Touch■Panel
●Putting stickers or sheets (e.g. commercially available protective
lms, peep prevention sheets) on the display might cause
improper reaction of touch panel.
●When carrying the product in your pocket or bag, take care
not to put the touch panel close to metals or other conductive
materials, as it might cause false operation of the touch panel.
■■Organic■EL■(OLED)■display
●The lightning intensity of OLED may be decreased partly and
the color of OLED may be changed, when the same image has
been displayed for a long time, the brightness of display is set
to be brighter than necessary, or the extreme continuous use is
performed. It is not abnormal because that is the characteristic
of OLED.
●Although the organic EL (OLED) display used on the product is
made using high-precision technology, some pixels (dots) might
be lit or out at all times. Or color may be changed or unevenness
of brightness may be shown if looked at from dierent angles.
Note that that is because of the structure of OLED display, not
a fault.
●Leaving the OLED exposed to the direct sunlight might cause
a fault. Take care when you place the product by the window or
outside.
■■Internal■battery
Li-ion00
(The internal battery of the product is a
lithium-ion battery)
When you purchase your product, the
internal battery is not fully charged.
Charge the battery before using the
product. Also charge the battery before
using the product if you have not used the
product for a long time.
●Use in very hot or cold environments, for example, when left in a
car with the windows closed in summer, will cause the battery
capacity to drop and shorten the available battery usage time.
This will also shorten the battery pack service life. Try to use the
internal battery as far as possible at room temperature.
●After the internal battery is charged, battery power decreases
bit by bit even if the product is not used. The internal battery
may be discharged if the product is not used for a long time. It is
recommended to charge the product before use.
●The internal battery is a consumable item. If the performance of
the internal battery does not recover (e.g. the usable time after
each charge has become extremely short), the battery is at the
end of service life, so stop use. Because the battery is a built-in
type, an au shop will accept holding over and repair for a charge.
You may not use the product for a certain period. Please be
forewarned. The life time of the internal battery depends on the
usage etc.
●The internal battery sometimes swell up as they approach the
end of their service life. This is due to the properties of lithium-
ion batteries, and is not a problem in terms of safety.
■■Charging■equipment
●Do not wrap the cord of the specied charging equipment (sold
separately) around the adapter itself. Do not forcibly bend a
plug of the charging equipment or the connection between
the connector and power cord. Do not place heavy objects on
the adapter cord or USB cable, or apply unnecessary force by
strongly pulling them, etc. May cause malfunction.
●When unplugging the plug of the specied charging equipment
(sold separately) from the power outlet or accessory socket, hold
and pull the power plug. Pulling on the cable might damage it.
■■Wireless■charging
●Do not stick metallic items (such as stickers that contain metal)
on wireless charger (sold separately) or the back of the product.
Doing so may result in a malfunction.
●Although the information light on the wireless charger (sold
separately) may remain on after the product has nished
charging, this is not a fault.
●Charging may stop just before the battery is fully recharged.
●If charging stops before the battery is fully recharged, charging
may not begin immediately.
●Depending on the Qi specication-compatible product, charging
may repeatedly start and stop. Charge this product with an au-
approved product.
●If the temperature exceeds a certain level, charging may stop
or take a long time, but this is not a fault. Please wait for the
temperature to decrease.
●Place the wireless charger (sold separately) on a at, stable
surface and charge the product.
●Turn o the vibration function when charging wirelessly. If the product
vibrates, it may not fully charge or fall o the wireless charger.
●Remove any cases, covers, plastic lm stuck by your own,
stickers, and so on attached to the product before charging.
●Check that the wireless charger and the product are not wet.
●Do not wirelessly charge the product while it is connected to the
optional AC adapter or Type-C cable.
●Keep the product away from devices that support wireless
charging. Otherwise, the au product you wish to charge may not
be detected correctly and may not be charged.
●If the product receives interference from a radio or TV, use the
product as far away from the radio or TV as possible.
●Depending on the Qi specication-compatible product, it may
not receive calls while charging. Charge this product with an au-
approved product.
●Depending on the Qi specication-compatible product, charging
may not be able to start due to mutual interference with the Osaifu-
Keitai
®
function. Charge this product with an au-approved product.
●If you run an application on the product while it is being charged
wirelessly, it may not fully charge.
●Although the product may become warm while it is on the
wireless charger (sold separately), this is not a fault.
●Reception quality may decrease while the product is charging on
the wireless charger (sold separately).
●Do not move the wireless charger (sold separately) and the
product while it is charging.
●After the product has nished charging, the remaining battery
level may decrease, even if the product is left as is.
■■au■IC■Card
●Do not forcibly remove or insert the au IC Card. Be careful not to
exert excessive force when inserting the card into your au cell phone.
●You are responsible for any damage caused by inserting your au
IC Card into some other IC card reader/writer, etc.
●Do not put stickers, etc. on the au IC Card.
●Do not insert au IC Card with a conversion adapter. May cause
malfunction.
●Do not damage the card (use in a hot place, throw into re,
contact the metal part with foreign object, give an impact, bend,
apply a load, moisten, etc.). May cause data loss or malfunction.
■■Camera
●When photographing important occasions, take a trial shot in
advance and check the shot image to make sure it is correctly shot.
●Do not shoot where shooting is prohibited.
■■LG■TV■antenna■cable■01
●LG TV antenna cable 01 is not covered by the warranty.
■■IC■card■opener■for■LGV35■(sample)
●Do not force the IC card opener for LGV35 (sample). May cause
it to break or damage.
■■Transparent■cover■(sample)
●Do not force the transparent cover (sample).
May cause it to break or damage.
●When disposing of it, follow the rules regarding disposal in your area.
■■Cleaning■cloth■(sample)
●Do not force the cleaning cloth (sample) when you clean the product.
May cause damage of the product and the display, wrinkles of
protective lm.
■■Copyrights■and■rights■of■portrait
●You are not allowed to copy, distribute, publish, modify or edit
the data you shot, recorded or downloaded using the product
without the consent of the copyright holder, except for personal
use, under the copyright law.
In addition, do not use or modify portraits or names of other
individuals without their consent, as it might infringe on rights of
portrait.
Note that shooting and recording may be restricted at some live
performances, shows and exhibitions even for personal use.
●Be careful about the copyright and portrait right when posting
images you shot, etc. on Internet homepages.
■■Backup■content■on■the■product
●Please back up important content recorded or downloaded
for the product to an outside source. Content recorded to
memory on the product sometimes disappears or is altered by
unexpected factors, such as static electricity or a fault, repair,
mishandling, etc.
■■FCC■Compliance■information
●The product is certied by Federal Communications Commission
(FCC).
FCC ID of this product is ZNFQVR.
Or you can check as follows.
<<How to check>>
On the Home screen u [Settings] u "General" tab u [Regulatory
& safety]
Notes on waterproof, dustproof and
shock resistance properties
This■product■has■a■protection-rated■(JIS■C■0920)■at■IPX5*1■and■
IPX8*2,■as■well■as■a■dustproof■property■equivalent■to■IP6X*3■on■
the■condition■that■the■card■tray■is■securely■attached■(based■on■
in-house■testing).
The■product■also■meets■14■ruggedization■test■of■the■US■
Department■of■Defense's■MIL-STD-810G■standards
*4
■(by■
Company■test■methods).■Product■capabilities■are■conrmed■in■a■
test■environment,■and■does■not■guarantee■capabilities■under■all■
conditions■of■actual■use.■No■guarantees■are■made■with■regard■to■
non-breakage■or■non-fault.
Before■using■the■product,■thoroughly■read■"Important■items■to■
remember■before■use"■to■ensure■correct■use.■Failure■to■follow■
the■contents■described■in■these■sections■may■cause■the■
intrusion■of■water,■sand■or■other■foreign■material,■resulting■in■
overheating,■re,■electric■shock,■injury■or■a■fault.
*1 IPX5 equivalent means that the product will maintain its operability
as a phone even if it is sprayed with water from a 6.3 mm diameter
nozzle at a distance of about 3 meters for more than 3 minutes at
a rate of about 12.5 liters per minute from any direction.
*2 IPX8 equivalent means that the product will maintain its operability
as a phone with no water getting inside the main unit even if it is
gently submerged in a tank of still tap water at room temperature
to a depth of 1.5 meter for about 30 minutes.
*3 IP6X equivalent means that the product will securely maintain
its function of no grit and dust getting inside the main unit even
after it has been placed in an apparatus with grit and dust of
diameters of 75 μm or less and shaken for 8 hours (ingress of
grit and dust cannot be prevented completely).
*4 14 categories of MIL-STD-810G
item Contents of the test
Low Pressure
(Operation)
Tested continuously for 1 hours (57.2 kPa/
equivalent to altitude of about 4,572 m)
High Temperature
(Operation)
Tested in an operation environment of 43℃
continuously for 4 hours, and a storage
environment of 63℃ continuously for 4 hours
High Temperature
(Storage)
Low Temperature
(Operation)
Tested in an operation environment of -21℃
continuously for 4 hours, and a storage
environment of -33℃ continuously for 4 hours
Low Temperature
(Storage)
Temperature
Shock
Tested by subjecting to sudden temperature
change from -21 to 43℃ continuously for 2
hours, repeated for 3 times
Solar Radiation
Tested by subjecting continuously for 24 hours
to maximum light quantity 1,120 W/㎡ (maximum
temperature 49℃ ) followed , repeated for 3 days
Blowing Rain Tested by subjecting to rainfall of 2 cm/hour,
15 minutes
Humidity Tested by subjecting continuously for 15 days
(humidity 88-95%, temperature 31 to 41℃ )
Salt Fog Resistance to salt water tested by subjecting
continuously for 24 hours to salt fog and then
drying for 24 hours, repeated for 4 days
Sand and Dust Dust resistance tested by subjecting to dust
continuously for 6 hours (wind 8.9±1.3 m/
sec, concentration 10±7 g/㎥ )
Immersion Tested by immersing in approx. 1±0.1 m of
water for 30 minutes
Vibration Tested by subjecting to vibration for 3 hours (in
3 directions at 1 hour each/20 to 2,000 Hz)
item Contents of the test
Shock Tested by dropping from about 1.22 m in 10
directions
Proper■operation■of■the■product■in■every■possible■condition■
during■actual■use■is■not■guaranteed.■Malfunctions■determined■
to■be■caused■by■mishandling■by■the■customer■are■not■covered■
by■the■warranty.
Important items to remember before use
• Make sure that the card tray is tightly closed. Waterproofness is
only eective when the covers are securely closed.
• Do not open/close the card tray if your hands or the main unit is wet.
• Do not splash the product with or immerse it in liquid other than
tap water (seawater, a swimming pool, hot spring, soap, detergent
or water with bath salts, alcohol, juices, seasonings, etc.). Do not
use in places subject to direct splashing with pet urine.
• If any liquid falls on the product, immediately rinse it o with tap water.
Soap/Detergent/Bathsalts
Seawater Hotspring
• Do not place the product directly on the sand at a beach, etc.
Sand or other small particles might get inside the earpiece,
microphone or speaker, causing the volume to drop. If sand gets
inside the product's main unit from the hinge part, etc., it might
cause overheating or a fault.
Sand/Mud
• Do not use the product underwater.
• Do not leave the product in a humid place such as a bathroom or
kitchen for an extended period of time.
• Even after water is drained, the inner parts might be still wet.
Although you can use the product, do not place it near things
that must not get wet. Take care not to wet your clothes, bag or
contents of the bag.
• Drain water if it becomes temporarily hard to hear the sound due
to water remaining in the microphone or earpiece.
• Avoid spraying the product with high-pressure water or
submerging it in water for extended periods of time, as the
product is not designed to withstand high water pressure.
• Do not wash the product in a washing machine or ultrasound
bath.
• Do not immerse the product into a bathtub. The product is not
designed to withstand the hot temperatures.
• Extreme changes in temperature cause condensation resulting in
a malfunction. Wait until the main unit reaches room temperature
before you bring the product from a cold place into a warm
bathroom etc.
• This product does not oat on water.
●Card tray
• Make sure that the card tray is securely closed. Just a small
particle (a hair, etc.) on the seals can cause water leak.
• Do not attach/remove the card tray with gloved hands. Just a
small particle (a hair, etc.) on the seals can cause water leaks.
Wipe o any minuscule droplets of water or dirt with a clean dry
cloth before closing the covers.
• If the card tray is deteriorated or damaged, the waterproof
property becomes ineective.
• For details on closing the card tray, refer to "Basic Manual" and
"Basic Manual application".
●If any liquid other than plain water gets on the product
• If any liquid other than plain water (e.g. seawater, detergent,
alcohol) gets on the product, immediately rinse it with plain water.
• You can wash the product under a mild ow (up to 6 liters per
minute) of tap water at room temperature (5℃ to 35℃ ) at a
distance of about 10 cm from the faucet or showerhead.
• If the product gets dirty, instead of using a brush, wash it with
your hands holding the card tray so that they do not open.
●After the product gets wet
• After the product gets wet, drain water, and wipe the main unit and
the card tray with a clean dry cloth without removing the card tray.
• In cold climates, water on the main unit may turn to frost. Using
the product with frost may cause a fault. Do not leave the
product without wiping o water.
●Rubber seals
• Rubber seal in the card tray plays an important part in waterproof
property. Do not damage or remove the rubber seals.
• Take care not to get the rubber seals caught when closing the
card tray. Forcibly closing the cover with the rubber seals caught
may damage them resulting in loss of waterproof property. Just
a small particle (a hair, etc.) on the seals can cause water leak.
• If any liquid other than plain water (e.g. alcohol) gets on the
rubber seals, it may cause deterioration in durability.
• Do not insert the sharp pointed object in the card tray. May
damage or deform the product or damage the rubber seals,
causing water leak.
• It is recommended to replace the parts for maintaining
waterproof property once every two years regardless of whether
any abnormality is present. For information on part replacement,
contact an au shop near you.
●Heat resistance
• Do not immerse the product into boiling water or splash boiling water
on it. The product is not designed to withstand the hot temperatures.
●Shock
• The product is resistant to shock, but product shock resistance
assumes usage in daily situations; subjecting the product to
excessive shock such as by throwing or causing/letting the
product fall forcefully may break the product.
Precautions on charging
• The supplied and optional accessories are not waterproof/
dustproof. Be sure to check the following points before and after
charging.
• Never charge the battery if the main unit is wet. May cause re,
burns, injuries, or electric shock.
• Check that the main unit is not wet. If you are charging the battery
just after the product gets wet, drain water well and wipe remaining
water o with a clean dry cloth before charging.
• Do not touch the specied charging equipment (sold separately)
with wet hands. May cause electric shock.
• Do not splash water over the specied charging equipment (sold
separately) when using them. Do not use them near water such,
as in a bathroom, shower room, kitchen or washroom. Failure
to do so might cause re, burns, electric shock, or malfunction.
Do not bring them into a bathroom, etc. even when you are not
charging with them. Failure to do so might cause re, burns,
electric shock, or malfunction.