CAUTION
Do not disassemble, adjust, or repair the product arbitrarily.
Do not place the product near excessive heat or ammable material.
The product may be damaged if an incompatible charger is used.
Make sure that an infant or child does not swallow a magnet or a small
component of the product.
Make sure that foreign objects do not enter the charger’s connectors
(charging port and power plug). Failure to do so may result in re or
electric shock.
If you have a medical device implanted, contact your doctor before using
this device.
This product has a built-in battery, and the battery cannot be removed
or replaced arbitrarily.
For your safety, do not remove the battery incorporated in the product.
If you arbitrarily replace the battery or don’t replace it correctly, it may
explode.
The lithium-ion battery is a hazardous component that can cause injury.
Battery replacement by an unqualied professional can cause damage
to your device.
Do not discard the battery arbitrarily. Follow the local procedure for
discarding batteries.
In order to prevent unnecessary energy consumption, disconnect the
device when fully charged. Always use an easily accessible power outlet
for charging your device.
Disposal of a battery into re or a hot oven, or mechanically crushing or
cutting of a battery, that can result in an explosion.
A battery subjected to extremely low air pressure that may result in an
explosion or the leakage of ammable liquid or gas.
NOTE
If the product is exposed to excessive sweat, clean the product.
Keep the earbuds clean.
HD Speaker
If the communication network of the device you are connecting to supports
HD Voice Calling, you can enjoy making voice calls and listening to music in
high denition.
Product Components
LG TONE Free™
Earbuds (medium eargels
installed)
UV Charging Case
Extra Ear Gels
(small & large)
USB Type C™ Charging
Cable
USB C to AUX cable Owner's Manual Warranty Card
NOTE: Actual product design may differ from images shown in manual.
Make sure authentic LG Electronics components are used. Using a
non-authentic component may damage the product and thus void the
warranty.
Use the USB Type C™ cable provided with the product.
!CAUTION
Overview
Charging Case
Earbuds
*Make sure that the charging terminal is not soiled with foreign substance.
*The appearance and specications of the actual product may differ depending
on the model.
Pairing and Connecting
Fast Pair
-(
-(
#MVFUPPUI 0/
~39 inch, ~1m
1 Turn on the Bluetooth function on the mobile phone or the device to
be connected.
2 Open the cover of the charging case with the earbuds mounted on the case.
Press and hold the touchpad of the left or right earbud for 3 to 5 seconds
until the battery status indicator blinks in blue.
-(
-(
-(
-(50/&'1
-(
-(50/&'1
#MVFUPPUI
3 When the Fast Pair connection pop-up appears on the top area of the
mobile phone screen, tap it to connect. (It only supports Android™ 6.0
or higher, and requires conguring Bluetooth and location information
settings of the mobile device.)
4 If the pop-up does not appear, select [LG-TONE-FP9] from the Bluetooth
menu on the mobile phone and connect it (for users of iOS or Android 5.0
or lower versions).
!CAUTION: In the list of Bluetooth connected devices, LG-TONE-FP9_LE
is not the correct model name for connection. Check the model name in
use and connect with the model name without “LE”.
NOTE: To connect with another device, perform the above procedure again.
Automatic Reconnection
The earbuds are connected automatically when you open the cover of the
charging case.
If you close the cover of the charging case with both earbuds mounted in
the charging case, the earbuds are disconnected.
Wearing Earbuds
1 Separate the earbuds from the charging case and adjust them so that
they t comfortably in your ears.
NOTE: You can use ear gels that t your ears to
improve Active Noise Canceling (ANC) performance
and enjoy rich music sound.
2 When you wear the earbuds, you will hear a wearing detection alarm.
Playing Music
-(
Function Description
Play / Pause : Touch the left or right earbud once.
Adjusting
the Volume
: Touch the left(Decrease volume) or
right(Increase volume) earbud twice.
Play Next : Touch the left or right earbud three times.
NOTE: You can change the operation method of the function in the touchpad
settings of the LG TONE Free app.
Mobile Calling Functions
Function Status Description
Answering Calls Ringing Touch the left or right earbud once.
Ending Calls Talking Touch the left or right earbud twice.
Making Calls Idle
If you make a call using a mobile phone,
the call is automatically connected to the
headset.
Receiving Calls
while on the
Phone
Talking
If you touch the left or right earbud once,
the current call will go on hold, and you will
be able to answer an incoming call.
If the previous call is on hold, you can nish
the current call on the mobile phone.
(It works differently depending on the
mobile phone settings.)
Rejecting Calls Ringing Touch and hold the left or right earbud.
Listen to the Ambient Sound (LAS) / Active Noise Cancellation (ANC)
Listen to the Ambient Sound (LAS) Touch and hold the left or right earbud to switch between the ANC mode
and the LAS mode.
You can set the LAS and ANC functions in the LG TONE Free app.
You can congure the Listen to the Ambient Sound mode and Conversation
mode using the LG TONE Free app.
If you use the LAS or ANC function, the battery consumes faster, reducing
the time you can use the product.
You can use the LAS and ANC functions while being idle, listening to music,
or being on the phone.
*ANC is an acronym for Active Noise Cancellation.
CAUTION: When the LAS mode is enabled, you may hear the ambient
sound become loud suddenly.
When using the ANC function outdoors, pay attention to the
surrounding environment for safety.
The Listen to the Ambient Sound (LAS) function allows you to listen to the
ambient sound so that you can recognize the surrounding situation and any
potential risks.
Active Noise Cancellation (ANC)
The Active Noise Cancellation (ANC) function blocks most ambient sounds.
So, you can use the function to listen to music or watch a video with
minimal noise interference.
UVnano
The charging case has a built-in
UVnano LED, which allows you to use
your earbuds cleanly.
If you charge the earbuds wired after
mounting them on the charging case
and closing the cover, the UVnano LED
operates for 5 minutes.
*UVnano is a compound word derived
from the words UV and its unit,
nanometer.
NOTE: The UVnano indicator turns on blue while the UVnano LED is on.
The UVnano charging case eliminates up to 99.9% of harmful
bacteria inside the earbud hole.
In the case of a white product, discoloring may occur in the contact
area of the UVnano LED, but it does not affect the product function.
