LG RM-15LA70 User manual

R
LCD TV
SERVICE MANUAL
CAUTION
BEFORE SERVICING THE CHASSIS,
READ THE SAFETY PRECAUTIONS IN THIS MANUAL.
CHASSIS : ML-024E
MODEL : RM/RZ-15LA70
website:http://biz.LGservice.com
e-mail:http://www.LGEservice.com/techsup.html

- 2 -
CONTENTS
Contents .................................................................................................. 2
Safety Precautions ..................................................................................3
Servicing Precautions ............................................................................ 4
Description of Controls .......................................................................... 6
Adjustment Instruction ............................................................................9
Block Diagram.........................................................................................11
Exploded View ...................................................................................... 13
Exploded View Parts List.......................................................................14
Replacement Parts List ........................................................................ 15
SVC. Sheet .................................................................................................

- 3 -
SAFETY PRECAUTIONS
Many electrical and mechanical parts in this chassis have special safety-related characteristics. These parts are identified by in the
Schematic Diagram and Replacement Parts List.
It is essential that these special safety parts should be replaced with the same components as recommended in this manual to prevent
X-RADIATION, Shock, Fire, or other Hazards.
Do not modify the original design without permission of manufacturer.
General Guidance
An isolation Transformer should always be used during the
servicing of a receiver whose chassis is not isolated from the AC
power line. Use a transformer of adequate power rating as this
protects the technician from accidents resulting in personal injury
from electrical shocks.
It will also protect the receiver and it's components from being
damaged by accidental shorts of the circuitry that may be
inadvertently introduced during the service operation.
If any fuse (or Fusible Resistor) in this TV receiver is blown,
replace it with the specified.
When replacing a high wattage resistor (Oxide Metal Film Resistor,
over 1W), keep the resistor 10mm away from PCB.
Keep wires away from high voltage or high temperature parts.
Due to high vacuum and large surface area of picture tube,
extreme care should be used in handling the Picture Tube. Do not
lift the Picture tube by it's Neck.
X-RAY Radiation
Warning:
To determine the presence of high voltage, use an accurate high
impedance HV meter.
Adjust brightness, color, contrast controls to minimum.
Measure the high voltage.
The meter reading should indicate
23.5 1.5KV: 14-19 inch, 26 1.5KV: 19-21 inch,
29.0 1.5KV: 25-29 inch, 30.0 1.5KV: 32 inch
If the meter indication is out of tolerance, immediate service and
correction is required to prevent the possibility of premature
component failure.
Before returning the receiver to the customer,
always perform an AC leakage current check on the exposed
metallic parts of the cabinet, such as antennas, terminals, etc., to
be sure the set is safe to operate without damage of electrical
shock.
Leakage Current Cold Check(Antenna Cold Check)
With the instrument AC plug removed from AC source, connect an
electrical jumper across the two AC plug prongs. Place the AC
switch in the on position, connect one lead of ohm-meter to the AC
plug prongs tied together and touch other ohm-meter lead in turn to
each exposed metallic parts such as antenna terminals, phone
jacks, etc.
If the exposed metallic part has a return path to the chassis, the
measured resistance should be between 1MΩand 5.2MΩ.
When the exposed metal has no return path to the chassis the
reading must be infinite.
An other abnormality exists that must be corrected before the
receiver is returned to the customer.
Leakage Current Hot Check (See below Figure)
Plug the AC cord directly into the AC outlet.
Do not use a line Isolation Transformer during this check.
Connect 1.5K/10watt resistor in parallel with a 0.15uF capacitor
between a known good earth ground (Water Pipe, Conduit, etc.)
and the exposed metallic parts.
Measure the AC voltage across the resistor using AC voltmeter
with 1000 ohms/volt or more sensitivity.
Reverse plug the AC cord into the AC outlet and repeat AC voltage
measurements for each exposed metallic part. Any voltage
measured must not exceed 0.75 volt RMS which is corresponds to
0.5mA.
In case any measurement is out of the limits specified, there is
possibility of shock hazard and the set must be checked and
repaired before it is returned to the customer.
Leakage Current Hot Check circuit
The source of X-RAY RADIATION in this TV receiver is the High
Voltage Section and the Picture Tube.
For continued X-RAY RADIATION protection, the replacement
tube must be the same type tube as specified in the
Replacement Parts List.
1.5 Kohm/10W
To Instrument's
exposed 
METALLIC PARTS
Good Earth Ground
such as WATER PIPE,
CONDUIT etc.
AC Volt-meter
IMPORTANT SAFETY NOTICE
0.15uF

- 4 -
CAUTION: Before servicing receivers covered by this service
manual and its supplements and addenda, read and follow the
SAFETY PRECAUTIONS on page 3 of this publication.
NOTE: If unforeseen circumstances create conflict between the
following servicing precautions and any of the safety precautions on
page 3 of this publication, always follow the safety precautions.
Remember: Safety First.
General Servicing Precautions
1. Always unplug the receiver AC power cord from the AC power
source before;
a. Removing or reinstalling any component, circuit board
module or any other receiver assembly.
b. Disconnecting or reconnecting any receiver electrical plug or
other electrical connection.
c.
Connecting a test substitute in parallel with an electrolytic
capacitor in the receiver.
CAUTION: A wrong part substitution or incorrect polarity
installation of electrolytic capacitors may result in an
explosion hazard.
d. Discharging the picture tube anode.
2. Test high voltage only by measuring it with an appropriate high
voltage meter or other voltage measuring device (DVM,
FETVOM, etc) equipped with a suitable high voltage probe.
Do not test high voltage by "drawing an arc".
3. Discharge the picture tube anode only by (a) first connecting
one end of an insulated clip lead to the degaussing or kine
aquadag grounding system shield at the point where the picture
tube socket ground lead is connected, and then (b) touch the
other end of the insulated clip lead to the picture tube anode
button, using an insulating handle to avoid personal contact with
high voltage.
4. Do not spray chemicals on or near this receiver or any of its
assemblies.
5. Unless specified otherwise in this service manual, clean
electrical contacts only by applying the following mixture to the
contacts with a pipe cleaner, cotton-tipped stick or comparable
non-abrasive applicator; 10% (by volume) Acetone and 90% (by
volume) isopropyl alcohol (90%-99% strength)
CAUTION: This is a flammable mixture.
Unless specified otherwise in this service manual, lubrication of
contacts in not required.
6. Do not defeat any plug/socket B+ voltage interlocks with which
receivers covered by this service manual might be equipped.
7. Do not apply AC power to this instrument and/or any of its
electrical assemblies unless all solid-state device heat sinks are
correctly installed.
8. Always connect the test receiver ground lead to the receiver
chassis ground before connecting the test receiver positive
lead.
Always remove the test receiver ground lead last.
9. Use with this receiver only the test fixtures specified in this
service manual.
CAUTION: Do not connect the test fixture ground strap to any
heat sink in this receiver.
Electrostatically Sensitive (ES) Devices
Some semiconductor (solid-state) devices can be damaged easily
by static electricity. Such components commonly are called
Electrostatically Sensitive (ES) Devices. Examples of typical ES
devices are integrated circuits and some field-effect transistors and
semiconductor "chip" components. The following techniques
should be used to help reduce the incidence of component
damage caused by static by static electricity.
1. Immediately before handling any semiconductor component or
semiconductor-equipped assembly, drain off any electrostatic
charge on your body by touching a known earth ground.
Alternatively, obtain and wear a commercially available
discharging wrist strap device, which should be removed to
prevent potential shock reasons prior to applying power to the
unit under test.
2. After removing an electrical assembly equipped with ES
devices, place the assembly on a conductive surface such as
aluminum foil, to prevent electrostatic charge buildup or
exposure of the assembly.
3. Use only a grounded-tip soldering iron to solder or unsolder ES
devices.
4. Use only an anti-static type solder removal device. Some solder
removal devices not classified as "anti-static" can generate
electrical charges sufficient to damage ES devices.
5. Do not use freon-propelled chemicals. These can generate
electrical charges sufficient to damage ES devices.
6. Do not remove a replacement ES device from its protective
package until immediately before you are ready to install it.
(Most replacement ES devices are packaged with leads
electrically shorted together by conductive foam, aluminum foil
or comparable conductive material).
7. Immediately before removing the protective material from the
leads of a replacement ES device, touch the protective material
to the chassis or circuit assembly into which the device will be
installed.
CAUTION:Be sure no power is applied to the chassis or circuit,
and observe all other safety precautions.
8. Minimize bodily motions when handling unpackaged
replacement ES devices. (Otherwise harmless motion such as
the brushing together of your clothes fabric or the lifting of your
foot from a carpeted floor can generate static electricity
sufficient to damage an ES device.)
General Soldering Guidelines
1. Use a grounded-tip, low-wattage soldering iron and appropriate
tip size and shape that will maintain tip temperature within the
range or 500 F to 600 F.
2. Use an appropriate gauge of RMA resin-core solder composed
of 60 parts tin/40 parts lead.
3. Keep the soldering iron tip clean and well tinned.
4. Thoroughly clean the surfaces to be soldered. Use a mall wire-
bristle (0.5 inch, or 1.25cm) brush with a metal handle.
Do not use freon-propelled spray-on cleaners.
5. Use the following unsoldering technique
a. Allow the soldering iron tip to reach normal temperature.
(500 F to 600 F)
b. Heat the component lead until the solder melts.
c. Quickly draw the melted solder with an anti-static, suction-
type solder removal device or with solder braid.
CAUTION: Work quickly to avoid overheating the
circuitboard printed foil.
6. Use the following soldering technique.
a. Allow the soldering iron tip to reach a normal temperature
(500 F to 600 F)
b. First, hold the soldering iron tip and solder the strand against
the component lead until the solder melts.
c. Quickly move the soldering iron tip to the junction of the
component lead and the printed circuit foil, and hold it there
only until the solder flows onto and around both the
component lead and the foil.
CAUTION: Work quickly to avoid overheating the circuit
board printed foil.
d. Closely inspect the solder area and remove any excess or
splashed solder with a small wire-bristle brush.
SERVICING PRECAUTIONS

- 5 -
IC Remove/Replacement
Some chassis circuit boards have slotted holes (oblong) through
which the IC leads are inserted and then bent flat against the
circuit foil. When holes are the slotted type, the following technique
should be used to remove and replace the IC. When working with
boards using the familiar round hole, use the standard technique
as outlined in paragraphs 5 and 6 above.
Removal
1. Desolder and straighten each IC lead in one operation by gently
prying up on the lead with the soldering iron tip as the solder
melts.
2. Draw away the melted solder with an anti-static suction-type
solder removal device (or with solder braid) before removing the
IC.
Replacement
1. Carefully insert the replacement IC in the circuit board.
2. Carefully bend each IC lead against the circuit foil pad and
solder it.
3. Clean the soldered areas with a small wire-bristle brush.
(It is not necessary to reapply acrylic coating to the areas).
"Small-Signal" Discrete Transistor Removal/Replacement
1. Remove the defective transistor by clipping its leads as close as
possible to the component body.
2. Bend into a "U" shape the end of each of three leads remaining
on the circuit board.
3. Bend into a "U" shape the replacement transistor leads.
4. Connect the replacement transistor leads to the corresponding
leads extending from the circuit board and crimp the "U" with
long nose pliers to insure metal to metal contact then solder
each connection.
Power Output, Transistor Device Removal/Replacement
1. Heat and remove all solder from around the transistor leads.
2. Remove the heat sink mounting screw (if so equipped).
3. Carefully remove the transistor from the heat sink of the circuit
board.
4. Insert new transistor in the circuit board.
5. Solder each transistor lead, and clip off excess lead.
6. Replace heat sink.
Diode Removal/Replacement
1. Remove defective diode by clipping its leads as close as
possible to diode body.
2. Bend the two remaining leads perpendicular y to the circuit
board.
3. Observing diode polarity, wrap each lead of the new diode
around the corresponding lead on the circuit board.
4. Securely crimp each connection and solder it.
5. Inspect (on the circuit board copper side) the solder joints of
the two "original" leads. If they are not shiny, reheat them and if
necessary, apply additional solder.
Fuse and Conventional Resistor Removal/Replacement
1. Clip each fuse or resistor lead at top of the circuit board hollow
stake.
2. Securely crimp the leads of replacement component around
notch at stake top.
3. Solder the connections.
CAUTION: Maintain original spacing between the replaced
component and adjacent components and the circuit board to
prevent excessive component temperatures.
Circuit Board Foil Repair
Excessive heat applied to the copper foil of any printed circuit
board will weaken the adhesive that bonds the foil to the circuit
board causing the foil to separate from or "lift-off" the board. The
following guidelines and procedures should be followed whenever
this condition is encountered.
At IC Connections
To repair a defective copper pattern at IC connections use the
following procedure to install a jumper wire on the copper pattern
side of the circuit board. (Use this technique only on IC
connections).
1. Carefully remove the damaged copper pattern with a sharp
knife. (Remove only as much copper as absolutely necessary).
2. carefully scratch away the solder resist and acrylic coating (if
used) from the end of the remaining copper pattern.
3. Bend a small "U" in one end of a small gauge jumper wire and
carefully crimp it around the IC pin. Solder the IC connection.
4. Route the jumper wire along the path of the out-away copper
pattern and let it overlap the previously scraped end of the good
copper pattern. Solder the overlapped area and clip off any
excess jumper wire.
At Other Connections
Use the following technique to repair the defective copper pattern
at connections other than IC Pins. This technique involves the
installation of a jumper wire on the component side of the circuit
board.
1. Remove the defective copper pattern with a sharp knife.
Remove at least 1/4 inch of copper, to ensure that a hazardous
condition will not exist if the jumper wire opens.
2. Trace along the copper pattern from both sides of the pattern
break and locate the nearest component that is directly
connected to the affected copper pattern.
3. Connect insulated 20-gauge jumper wire from the lead of the
nearest component on one side of the pattern break to the lead
of the nearest component on the other side.
Carefully crimp and solder the connections.
CAUTION: Be sure the insulated jumper wire is dressed so the
it does not touch components or sharp edges.

DESCRIPTION OF CONTROLS
- 6 -
POWERMUTE
TV/VIDEO MULTIMEDIA MTS
FCR
CH
CH
VOL
ENTER
123
456
789
0
VOL
EXIT MENU
DASP
REVIEW CAPTION SLEEP
APC
POWER
MTS
EXIT
VOLUME ( )
MUTE
NUMBERS
CHANNEL ( )
TV/VIDEO
Select: TV, VIDEO, S-Video,
Component, PC(PC only 
available for RM-15LA70)

Select: TV,Component,
PC(PC only available for 
RM-15LA70)

FCR
MULTIMEDIA
DASP
CAPTION
MENU
APC
REVIEW
:Press this button to return
to the last channel you
were watching.
Remote Control Buttons
Remote Control Buttons
SLEEP

- 7 -
Front of the
Front of the TV TV
R
TV/VIDEO
MENU
ENTER
VOLCH /I
ON/OFF
Side Control Panel
Side Control Panel
Enter Button
Channel Buttons
Volume Buttons
Remote Control Sensor
Power/Standby Indicator
Glows red in Standby mode,
Glows green when the TV is turned on.
Menu Button
TV/Video Button
On/Off Button

- 8 -
Back of the
Back of the TV TV
COMPONENT(480i/480p/720p/1080i)
VIDEO IN
DVD/DTV IN
RLVIDEO
P R P B Y
AUDIO(MONO)
H/P
75
ANT IN
S-VIDEO
AC INPUT
PC
SOUND
PC INPUT
COMPONENT(480i/480p)
VIDEO IN
DVD/DTV IN
RLVIDEO
P R P B Y
AUDIO(MONO)
H/P
75
ANT IN
S-VIDEO
AC INPUT
Audio/Video Input
PC Input PC sound Input
AC Input
DVD/DTV Input
Headphone
Jack
S-Video Input
RM-15LA70
RM-15LA70
RM-20LA70
RM-20LA70
* Kensington
Security System
Connector
Antenna Input

- 9 -
1. Application Object
This instruction is for the application to the LCD TV/Monitor,
ML-024E.
2. Notes
(1) This LCD TV has power within set. Connect the power
correctly, then start the adjustment.
(2) The adjustment must be performed under the correct
sequence.
(3) The adjustment must be performed in the circumstance of
25±5°C of temperature and 65±10°C of relative humidity if
there is no specific designation.
(4) The input voltage of the receiver must keep 100~220V,
50/60Hz in adjusting.
(5) The set must be operated for 15 minutes preliminary
before adjustment if there is no specific designation.
O‘Heat Run’ must be performed with the full white signal or TV
noise signal in the internal part of the set.
OThe time for ‘Heat Run’ can be changed owing to production
plan.
OCondition of Line Test : Standard color signal - 65±1dBuV
3. PC Mode Adjustment
3-1. Required Test Equipment
(1) Window Pattern which satisfied with VESA Spec. or
pattern which has White-Black signal simultaneously.
(2) Remote control for adjustment
3-2. Preparation for Adjustment
(1) Perform ‘Heat Run’ for more than 15 minutes in white
pattern.
(2) Connect the signal of pattern generator with LCD TV of PC
Input Jack(D-Sub).
(3) Confirm the XGA(1024x768) Window Pattern or
signal(White-Black) using the 801-GF/GD, VG819.
(4) Use the IN-START Key on R/C for adjustment to enter the
PC adjustment mode.
(5) Example of adjustment screen.
(6) Enter into the adjustment mode as <Fig. 1> and select the
cursor(red letters) to “RGBSE ” with the channel key on
R/C for adjustment.
(7) Press the Volume on R/C for adjustment.
(8) At this time the adjustment starts automatically changing
the number in order of RO --> GO --> BO --> RD --> GD --
> BD.
Finally, when the number of BD is changed the adjustment
is completed.
(9) Press the MENU or EXIT key to come out of the
adjustment mode.
4. COMPONENT Adjustment
(Only CMO MODULE)
4-1. Required Test Equipment
(1) Standard Color bar (75% Full Color bar) -> refer <fig.2>
(2) Remote control for adjustment
4-2. Preparation for Adjustment
(1) Operate Component Mode adjustment, after PC Mode
adjustment.
(2) Connect the signal of pattern generator with LCD TV of
Component Input Jack(D-Sub).
(3) Confirm the Color bar (75% Full Color bar) signal using the
801-GF/GD, VG819.
(4) Use the IN-START Key on R/C for adjustment to enter the
Component adjustment mode.
(5) Example of adjustment screen.
(6) Enter into the adjustment mode as <Fig. 2> and select the
cursor(red letters) to “DTVADJT ” with the channel key
on R/C for adjustment.
(7) Press the Volume on R/C for adjustment.
(8) At this time the adjustment starts automatically changing
the color of Color bar.
Finally, when the number of BD is changed the adjustment
is completed.
(9) Press the ENTER key. and then press EXIT key to come
out of the adjustment mode.
ADJUSTMENT INSTRUCTION
<Fig. 1>
<Fig. 2>

- 10 -
5. Option
No.
1
2
3
4
5
6
COMPO
3SYS
LGCON
MPIOS
BLUEB
RLOCK
0
0
0
0
1
0
Component input mode
0 : not ready 1 : ready
Video input applicable system
0 : NTSC-M(North America)
1 : NTSC-M & PAL-M/N multi(South America)
RS232C Protocol
0 : MPI Protocol(Zenith program)
1 : LG Protocol(LG program)
RS232C Protocol OSD display
0 : non display OSD 1 : display OSD
No - signal Video mode
0 : Black-Back 1 : Blue-Back
RS232C Protocol
0 : Remocon Lock 1: Remocon Unlock
Item Specification Remark

- 11 -
BLOCK DIAGRAM

MEMO
- 12 -

- 13 -
EXPLODED VIEW
120
400
500
120
560
530
250
520
230
430
210
112
300
370
380
360
340
330
350

- 14 -
112 6306V15002A LCD MODULE, M150X3-L04 XGA CHIMEI TFT COLOR
120 6400GKTX01B
SPEAKER,FULLRANGE F1527C-6428-2 K-TONE 8OHM 7/12W 85DB OTHERS 40*70MM TRACK TYPE
210 4811V00076C BRACKET ASSEMBLY, REAR AV RM-15LA71. AAPZKX ML024E NON .
230 4950V00192D METAL, SHIELD SBHG 15LA70 C/SKD
250 4951TKS150B METAL ASSEMBLY , FRAME MAIN, RZ-15LA70
300 3091TKL051D CABINET ASSEMBLY, RM-15LA70 BRAND 3090V00525 CANADA CKD
310 5020V00874A BUTTON, CONTROL RZ-15LA70 ABS, HF-380 8KEY
330 4950V00157F METAL, HINGE ASSY NON 15LA70
340 4810V00777F BRACKET, STAND 15LA70 NON HIPS 51SF FRONT
350 4810V00778F BRACKET, STAND 15LA70 NON HIPS 51SF COVER
360 4810V00928A BRACKET, STAND RZ-15LA70 NON ABS, HF-380
370 4950V00190A METAL, BASE SPCC(CR) 3T RZ-15LA70
380 4950V00194A METAL, STAND SPCC(CR) SUPPORTER(LA70)
400 3809TKB030G BACK COVER ASSEMBLY, RM-15LA70 3808V0043 CANADA SKD
430 3550V00385A COVER, REAR AV RZ-15LA70 ABS, HF-380
520 6871VMMR68A PWB(PCB) ASSEMBLY,MAIN ML-024E RM-15LA70 PCB ASSY MAIN
530 6871VSMQ31A PWB(PCB) ASSEMBLY,SUB CONT ML024D 70TOOL CONTROL ASSY
560 6871VSMQ30A PWB(PCB) ASSEMBLY,SUB POWER ML024D 70TOOL POWER ASSY
EXPLODED VIEW PARTS LIST
No. PART NO. DESCRIPTION

- 15 -
DATE: 2004. 4. 22.
*S *AL LOC. NO. PART NO. DESCRIPTION / SPECIFICATION
C10 0CE227DF618 220UF STD 16V M FL TP5
C1107 0CE337BH618 330UF KME 25V M FL TP5
C1150 0CE337BH618 330UF KME 25V M FL TP5
C1151 0CE337BH618 330UF KME 25V M FL TP5
C1200 0CE227DH618 220UF STD 25V M FL TP5
C1235 0CE107DD618 100UF STD 10V M FL TP5
C13 0CE227DF618 220UF STD 16V M FL TP5
C209 0CE476DF618 47UF STD 16V M FL TP5
C211 0CE106DF618 10UF STD 16V M FL TP5
C215 0CE106DF618 10UF STD 16V M FL TP5
C216 0CE106DF618 10UF STD 16V M FL TP5
C289 0CE104DK618 0.1000UF STD 50V M FL TP5
C331 0CE107DF618 100UF STD 16V M FL TP5
C351 0CE227DF618 220UF STD 16V M FL TP5
C354 0CE476DF618 47UF STD 16V M FL TP5
C356 0CE106DF618 10UF STD 16V M FL TP5
C362 0CE107DF618 100UF STD 16V M FL TP5
C364 0CE336DF618 33UF STD 16V M FL TP5
C380 0CE105DK618 1UF STD 50V M FL TP5
C381 0CE106DF618 10UF STD 16V M FL TP5
C383 0CE106DF618 10UF STD 16V M FL TP5
C408 0CE106DK618 10UF STD 50V M FL TP5
C412 0CE105DK618 1UF STD 50V M FL TP5
C499 0CE476DK618 47UF STD 50V M FL TP5
C501 0CE107DF618 100UF STD 16V M FL TP5
C523 0CE104DK618 0.1000UF STD 50V M FL TP5
C526 0CE107DF618 100UF STD 16V M FL TP5
C541 0CE107DF618 100UF STD 16V M FL TP5
C581 0CE107DF618 100UF STD 16V M FL TP5
C613 0CE106DF618 10UF STD 16V M FL TP5
C614 0CE106DF618 10UF STD 16V M FL TP5
C616 0CE107DF618 100UF STD 16V M FL TP5
C629 0CE107DF618 100UF STD 16V M FL TP5
C633 0CE107DF618 100UF STD 16V M FL TP5
C706 0CE226BK618 22UF KME 50V M FL TP5
C719 0CE227BJ618 220U KME 35V M FL TP5
C728 0CE476BK618 47UF KME 50V M FL TP5
C731 0CE227BJ618 220U KME 35V M FL TP5
C744 0CE107BK638 100UF KME 50V M FM5 TP5
C832 0CE107DF618 100UF STD 16V M FL TP5
C703 181-120N 1000PF 4KV M E FMTW LEAD4.5
C704 181-120N 1000PF 4KV M E FMTW LEAD4.5
C1127 0CH3105F946 1UF 16V Z F 2012 R/TP
C1128 0CH3105F946 1UF 16V Z F 2012 R/TP
C1131 0CH3153K516 15000PF 50V K B 2012 R/TP
C1132 0CH3105F946 1UF 16V Z F 2012 R/TP
C1133 0CH3105F946 1UF 16V Z F 2012 R/TP
C1134 0CH3105F946 1UF 16V Z F 2012 R/TP
C1137 0CH3105F946 1UF 16V Z F 2012 R/TP
C1207 0CH3105F946 1UF 16V Z F 2012 R/TP
C1208 0CH3105F946 1UF 16V Z F 2012 R/TP
C1209 0CH3105F946 1UF 16V Z F 2012 R/TP
C1210 0CH3105F946 1UF 16V Z F 2012 R/TP
C1211 0CH3105F946 1UF 16V Z F 2012 R/TP
DATE: 2004. 4. 22.
*S *AL LOC. NO. PART NO. DESCRIPTION / SPECIFICATION
C1226 0CH3105F946 1UF 16V Z F 2012 R/TP
C1227 0CH3105F946 1UF 16V Z F 2012 R/TP
C1228 0CH3105F946 1UF 16V Z F 2012 R/TP
C1229 0CH3105F946 1UF 16V Z F 2012 R/TP
C1231 0CH3105F946 1UF 16V Z F 2012 R/TP
C1234 0CH3105F946 1UF 16V Z F 2012 R/TP
C402 0CH3472K516 4700PF 50V K B 2012 R/TP
C630 0CH3222K516 2200PF 50V K B 2012 R/TP
C716 0CH3222K516 2200PF 50V K B 2012 R/TP
C111 0CH6101K416 100PF 50V J NP0 2012 R/TP
C1121 0CH6271K416 270PF 50V J NP0 2012 R/TP
C122 0CH6330K416 33PF 50V J NP0 2012 R/TP
C123 0CH6330K416 33PF 50V J NP0 2012 R/TP
C1233 0CH6221K416 220PF 50V J NP0 2012 R/TP
C132 0CH6101K416 100PF 50V J NP0 2012 R/TP
C133 0CH6101K416 100PF 50V J NP0 2012 R/TP
C134 0CH6101K416 100PF 50V J NP0 2012 R/TP
C135 0CH6101K416 100PF 50V J NP0 2012 R/TP
C150 0CH6101K416 100PF 50V J NP0 2012 R/TP
C191 0CH6330K416 33PF 50V J NP0 2012 R/TP
C192 0CH6330K416 33PF 50V J NP0 2012 R/TP
C193 0CH6330K416 33PF 50V J NP0 2012 R/TP
C194 0CH6330K416 33PF 50V J NP0 2012 R/TP
C196 0CH6330K416 33PF 50V J NP0 2012 R/TP
C197 0CH6330K416 33PF 50V J NP0 2012 R/TP
C198 0CH6330K416 33PF 50V J NP0 2012 R/TP
C199 0CH6330K416 33PF 50V J NP0 2012 R/TP
C202 0CH6331K416 330PF 50V J NP0 2012 R/TP
C207 0CH6471K416 470F 50V J NP0 2012 R/TP
C208 0CH6471K416 470F 50V J NP0 2012 R/TP
C213 0CH6221K416 220PF 50V J NP0 2012 R/TP
C214 0CH6101K416 100PF 50V J NP0 2012 R/TP
C298 0CH6471K416 470F 50V J NP0 2012 R/TP
C299 0CH6471K416 470F 50V J NP0 2012 R/TP
C305 0CH6471K416 470F 50V J NP0 2012 R/TP
C312 0CH6680K416 68PF 50V J NP0 2012 R/TP
C313 0CH6680K416 68PF 50V J NP0 2012 R/TP
C314 0CH6680K416 68PF 50V J NP0 2012 R/TP
C360 0CH6151K416 150PF 50V J NP0 2012 R/TP
C382 0CH6151K416 150PF 50V J NP0 2012 R/TP
C385 0CH6151K416 150PF 50V J NP0 2012 R/TP
C406 0CH6101K416 100PF 50V J NP0 2012 R/TP
C407 0CH6101K416 100PF 50V J NP0 2012 R/TP
C44 0CH6150K416 15PF 50V J NP0 2012 R/TP
C510 0CH6150K416 15PF 50V J NP0 2012 R/TP
C511 0CH6150K416 15PF 50V J NP0 2012 R/TP
C536 0CH6151K416 150PF 50V J NP0 2012 R/TP
C635 0CH6560K416 56PF 50V J NP0 2012 R/TP
C636 0CH6560K416 56PF 50V J NP0 2012 R/TP
C739 0CH6101K416 100PF 50V J NP0 2012 R/TP
C749 0CH6101K416 100PF 50V J NP0 2012 R/TP
C750 0CH6101K416 100PF 50V J NP0 2012 R/TP
C8 0CH6101K416 100PF 50V J NP0 2012 R/TP
C824 0CH6220K416 22PF 50V J NP0 2012 R/TP
REPLACEMENT PARTS LIST
CAPACITOR
For Capacitor & Resistors, the
charactors at 2nd and 3rd digit in the
P/No. means as follows;
CC, CX, CK, CN, CH : Ceramic
CQ : Polyestor
CE : Electrolytic
CF : Fixed Film
RD : Carbon Film
RS : Metal Oxide Film
RN : Metal Film
RH : CHIP, Metal Glazed(Chip)
RR : Drawing

- 16 -
DATE: 2004. 4. 22.
*S *AL LOC. NO. PART NO. DESCRIPTION / SPECIFICATION
C825 0CH6220K416 22PF 50V J NP0 2012 R/TP
C826 0CH6220K416 22PF 50V J NP0 2012 R/TP
C900 0CH6330K416 33PF 50V J NP0 2012 R/TP
C1120 0CH2473K516 47000P 50V K B 2.0X1.25 R/TP
C1122 0CH2473K516 47000P 50V K B 2.0X1.25 R/TP
C512 0CH2473K516 47000P 50V K B 2.0X1.25 R/TP
C513 0CH2473K516 47000P 50V K B 2.0X1.25 R/TP
C517 0CH2473K516 47000P 50V K B 2.0X1.25 R/TP
C518 0CH2473K516 47000P 50V K B 2.0X1.25 R/TP
C519 0CH2473K516 47000P 50V K B 2.0X1.25 R/TP
C520 0CH2473K516 47000P 50V K B 2.0X1.25 R/TP
C820 0CH2473K516 47000P 50V K B 2.0X1.25 R/TP
C821 0CH2473K516 47000P 50V K B 2.0X1.25 R/TP
C823 0CH2473K516 47000P 50V K B 2.0X1.25 R/TP
C700 181-120K 2200PF 4KV M E FMTW LEAD 4.5
C708 181-091D DEHR33A102KN2A 1000PF 1KV 10
C709 181-120K 2200PF 4KV M E FMTW LEAD 4.5
C710 181-120K 2200PF 4KV M E FMTW LEAD 4.5
C717 181-091D DEHR33A102KN2A 1000PF 1KV 10
C718 181-091D DEHR33A102KN2A 1000PF 1KV 10
C726 181-091N "SL 100PF 1KV 10%,-10% R/TP T"
C777 181-091D DEHR33A102KN2A 1000PF 1KV 10
C100 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C102 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C103 0CH3103K516 10000PF 50V 10% B(Y5P) 2012
C106 0CH3103K516 10000PF 50V 10% B(Y5P) 2012
C107 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C108 0CH3103K516 10000PF 50V 10% B(Y5P) 2012
C11 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C110 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C1101 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C1110 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C1111 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C1114 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C1115 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C112 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C1123 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C1124 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C1126 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C1129 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C1130 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C114 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C1140 0CK225DFK4A "2.2UF 2012 16V 20%,-20% F(Y5"
C1141 0CK225DFK4A "2.2UF 2012 16V 20%,-20% F(Y5"
C1142 0CK225DFK4A "2.2UF 2012 16V 20%,-20% F(Y5"
C1143 0CK225DFK4A "2.2UF 2012 16V 20%,-20% F(Y5"
C1144 0CK225DFK4A "2.2UF 2012 16V 20%,-20% F(Y5"
C1145 0CK225DFK4A "2.2UF 2012 16V 20%,-20% F(Y5"
C1146 0CK225DFK4A "2.2UF 2012 16V 20%,-20% F(Y5"
C1147 0CK225DFK4A "2.2UF 2012 16V 20%,-20% F(Y5"
C115 0CH5620K416 62PF 50V 5% NP0 2012 R/TP
C116 0CH5620K416 62PF 50V 5% NP0 2012 R/TP
C117 0CH5620K416 62PF 50V 5% NP0 2012 R/TP
C118 0CH5620K416 62PF 50V 5% NP0 2012 R/TP
C119 0CH3103K516 10000PF 50V 10% B(Y5P) 2012
C12 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C120 0CH3103K516 10000PF 50V 10% B(Y5P) 2012
C1203 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C1204 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C1205 0CH3103K516 10000PF 50V 10% B(Y5P) 2012
C1206 0CH3103K516 10000PF 50V 10% B(Y5P) 2012
C121 0CH3103K516 10000PF 50V 10% B(Y5P) 2012
DATE: 2004. 4. 22.
*S *AL LOC. NO. PART NO. DESCRIPTION / SPECIFICATION
C1220 0CH3103K516 10000PF 50V 10% B(Y5P) 2012
C1221 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C1224 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C1225 0CH3103K516 10000PF 50V 10% B(Y5P) 2012
C1232 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C124 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C125 0CH3103K516 10000PF 50V 10% B(Y5P) 2012
C200 0CK225DFK4A "2.2UF 2012 16V 20%,-20% F(Y5"
C201 0CK225DFK4A "2.2UF 2012 16V 20%,-20% F(Y5"
C204 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C206 0CH6391K416 390PF 50V 5% NP0 2012 R/TP
C210 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C225 0CK225DFK4A "2.2UF 2012 16V 20%,-20% F(Y5"
C226 0CK225DFK4A "2.2UF 2012 16V 20%,-20% F(Y5"
C253 0CH6391K416 390PF 50V 5% NP0 2012 R/TP
C287 0CH6391K416 390PF 50V 5% NP0 2012 R/TP
C288 0CH6391K416 390PF 50V 5% NP0 2012 R/TP
C3 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C301 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C303 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C304 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C316 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C318 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C320 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C322 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C324 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C325 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C326 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C327 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C328 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C329 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C330 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C332 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C352 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C363 0CH3103K516 10000PF 50V 10% B(Y5P) 2012
C365 0CH3103K516 10000PF 50V 10% B(Y5P) 2012
C4 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C405 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C409 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C411 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C498 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C5 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C502 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C503 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C504 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C505 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C506 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C507 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C508 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C509 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C514 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C515 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C516 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C527 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C528 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C529 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C530 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C533 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C534 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C535 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C537 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C538 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP

DATE: 2004. 4. 22.
*S *AL LOC. NO. PART NO. DESCRIPTION / SPECIFICATION
C539 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C540 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C556 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C557 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C558 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C580 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C587 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C6 0CH5102K416 1000PF 50V 5% NP0 2012 R/TP
C609 0CH3822K516 8200PF 2012 50V 10% B(Y5P) R
C610 0CH3822K516 8200PF 2012 50V 10% B(Y5P) R
C615 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C618 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C619 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C626 0CK224DF56A 220000PF 2012 16V 10% R/TP X
C627 0CK224DF56A 220000PF 2012 16V 10% R/TP X
C628 0CH3103K516 10000PF 50V 10% B(Y5P) 2012
C631 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C634 0CH3103K516 10000PF 50V 10% B(Y5P) 2012
C638 0CH6020K116 2PF 50V 0.5 PF NP0 2012 R/TP
C639 0CH6020K116 2PF 50V 0.5 PF NP0 2012 R/TP
C640 0CH3103K516 10000PF 50V 10% B(Y5P) 2012
C644 0CH3103K516 10000PF 50V 10% B(Y5P) 2012
C645 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C661 0CH5120K416 12PF 50V 5% NP0 2012 R/TP
C662 0CH5120K416 12PF 50V 5% NP0 2012 R/TP
C663 0CH5120K416 12PF 50V 5% NP0 2012 R/TP
C664 0CH5120K416 12PF 50V 5% NP0 2012 R/TP
C665 0CH5120K416 12PF 50V 5% NP0 2012 R/TP
C666 0CH5120K416 12PF 50V 5% NP0 2012 R/TP
C667 0CH5120K416 12PF 50V 5% NP0 2012 R/TP
C668 0CH5120K416 12PF 50V 5% NP0 2012 R/TP
C669 0CH5120K416 12PF 50V 5% NP0 2012 R/TP
C670 0CH5120K416 12PF 50V 5% NP0 2012 R/TP
C671 0CH5120K416 12PF 50V 5% NP0 2012 R/TP
C672 0CH5120K416 12PF 50V 5% NP0 2012 R/TP
C673 0CH5120K416 12PF 50V 5% NP0 2012 R/TP
C674 0CH5120K416 12PF 50V 5% NP0 2012 R/TP
C675 0CH5120K416 12PF 50V 5% NP0 2012 R/TP
C676 0CH5120K416 12PF 50V 5% NP0 2012 R/TP
C677 0CH5120K416 12PF 50V 5% NP0 2012 R/TP
C678 0CH5120K416 12PF 50V 5% NP0 2012 R/TP
C679 0CH5120K416 12PF 50V 5% NP0 2012 R/TP
C680 0CH5120K416 12PF 50V 5% NP0 2012 R/TP
C681 0CH5120K416 12PF 50V 5% NP0 2012 R/TP
C682 0CH5120K416 12PF 50V 5% NP0 2012 R/TP
C683 0CH5120K416 12PF 50V 5% NP0 2012 R/TP
C684 0CH5120K416 12PF 50V 5% NP0 2012 R/TP
C698 0CK224DF56A 220000PF 2012 16V 10% R/TP X
C699 0CK224DF56A 220000PF 2012 16V 10% R/TP X
C711 0CH3103K516 10000PF 50V 10% B(Y5P) 2012
C712 0CH5821K416 820PF 50V 5% NP0 2012 R/TP
C724 0CH5102K416 1000PF 50V 5% NP0 2012 R/TP
C737 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C738 0CH3103K516 10000PF 50V 10% B(Y5P) 2012
C740 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C741 0CH3103K516 10000PF 50V 10% B(Y5P) 2012
C742 0CH3103K516 10000PF 50V 10% B(Y5P) 2012
C748 0CH3103K516 10000PF 50V 10% B(Y5P) 2012
C751 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C752 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C803 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C804 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
DATE: 2004. 4. 22.
*S *AL LOC. NO. PART NO. DESCRIPTION / SPECIFICATION
C805 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C806 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C807 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C808 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C809 0CH3822K516 8200PF 2012 50V 10% B(Y5P) R
C810 0CH3823K516 82000PF 2012 50V 10% B(Y5P)
C811 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C812 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C813 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C814 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C815 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C816 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C817 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C818 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C819 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C822 0CH5102K416 1000PF 50V 5% NP0 2012 R/TP
C827 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C828 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C829 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C830 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C831 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C833 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C877 0CH6180K416 18PF 50V 5% NP0 2012 R/TP
C901 0CH5390K416 39PF 50V 5% NP0 2012 R/TP
C1101 0CC15003G06 "15PF D 3KV 10%,-10% SL FMTW"
C1102 0CC15003G06 "15PF D 3KV 10%,-10% SL FMTW"
C1105 0CC15003G06 "15PF D 3KV 10%,-10% SL FMTW"
C1106 0CC15003G06 "15PF D 3KV 10%,-10% SL FMTW"
C1125 0CH2474F566 0.47UF 16V 10% X7R 2012 R/TP
C1212 0CH2474F566 0.47UF 16V 10% X7R 2012 R/TP
C1213 0CH2474F566 0.47UF 16V 10% X7R 2012 R/TP
C1214 0CH2474F566 0.47UF 16V 10% X7R 2012 R/TP
C1217 0CH2474F566 0.47UF 16V 10% X7R 2012 R/TP
C1218 0CH2474F566 0.47UF 16V 10% X7R 2012 R/TP
C1219 0CH2474F566 0.47UF 16V 10% X7R 2012 R/TP
C151 0CH2272K516 2700PF 50V 10% B(Y5P) 2012 R
C152 0CH2182K516 1800PF 50V 10% B(Y5P) 2012 R
C153 0CH2102K516 1000PF 50V 10% B(Y5P) 2012 R
C101 0CE107BF618 100UF KME 16V M FL TP5
C113 0CE107BF618 100UF KME 16V M FL TP5
C353 0CE475DK618 4.7UF STD 50V 20% FL TP 5
C357 0CE225DK618 2.2UF STD 50V 20% FL TP 5
C403 0CE476DH618 47UF STD 25V 20% FL TP 5
C404 0CE687DD618 680UF STD 10V 20% FL TP 5
C617 0CE107BH618 100UF KME TYPE 25V 20% FL TP
C620 0CE335DK618 3.3UF STD 50V 20% FL TP 5
C621 0CE107BF618 100UF KME 16V M FL TP5
C643 0CE476BF618 47UF KME TYPE 16V 20% FL TP
C707 0CE1072V610 100UF KMF 450V 20% FL BULK
C725 0CE4772J618 470UF KMF 35V 20% TP 5 FL
C727 0CE226BN618 22UF KME 100V M FL TP5
C730 0CE4772J618 470UF KMF 35V 20% TP 5 FL
C734 0CE4772J618 470UF KMF 35V 20% TP 5 FL
C743 0CE477BD618 470UF KME TYPE 10V 20% FL TP
C745 0CE477BD618 470UF KME TYPE 10V 20% FL TP
C746 0CE477BD618 470UF KME TYPE 10V 20% FL TP
C747 0CE477BD618 470UF KME TYPE 10V 20% FL TP
C701 0CF474285B0 0.47UF S 275V 10% PCX2 337 B
C302 0CH7476F662 47UF 16V 20% 7343 TP(+)
C315 0CH7476F662 47UF 16V 20% 7343 TP(+)
C317 0CH7476F662 47UF 16V 20% 7343 TP(+)
C319 0CH7476F662 47UF 16V 20% 7343 TP(+)
- 17 -

DATE: 2004. 4. 22.
*S *AL LOC. NO. PART NO. DESCRIPTION / SPECIFICATION
C321 0CH7476F662 47UF 16V 20% 7343 TP(+)
C323 0CH7476F662 47UF 16V 20% 7343 TP(+)
C1202 0CN475FH67A 4.7UF 3225 25V 20% R/TP X5R
C1222 0CN475FH67A 4.7UF 3225 25V 20% R/TP X5R
C1230 0CN475FH67A 4.7UF 3225 25V 20% R/TP X5R
D701 0DRSA00150A RBV-406 SANKEN BK USC 600V 4
D702 0DD100009AM EU1ZV(1) TP SANKEN
D704 0DD100009AM EU1ZV(1) TP SANKEN
D706 0DR060009AA TVR06J TP GULF SEMICONDUCTOR
D707 0DRSD00091A SF20JC10 SHINDENGEN ST FTO22
D710 0DR340009AA MBRS340 TP FAIRCHILD NON 40V
D711 0DR340009AA MBRS340 TP FAIRCHILD NON 40V
D100 0DS181009AA KDS181 TP KEC SOT-23 80V 3
D1101 0DS181009AA KDS181 TP KEC SOT-23 80V 3
D1102 0DS181009AA KDS181 TP KEC SOT-23 80V 3
D1105 0DS181009AA KDS181 TP KEC SOT-23 80V 3
D1106 0DS181009AA KDS181 TP KEC SOT-23 80V 3
ZD1101 0DZ510009EE UDZ S 5.1B TP ROHM-K SOD323
ZD1102 0DZ510009EE UDZ S 5.1B TP ROHM-K SOD323
ZD202 0DZ510009EE UDZ S 5.1B TP ROHM-K SOD323
ZD203 0DZ510009EE UDZ S 5.1B TP ROHM-K SOD323
ZD704 0DZ110009AD MTZJ11B TP ROHM-K DO34 500MW
ZD400 0DZ330009BA ZENER HZT33 TAPING
ZD701 0DZ910009AJ MTZJ9.1B TP ROHM-K DO34 0.5W
IC502 0ICTMMO004A SC786108DWR2 MOTOROLA 16 R/T
IC102 0IFA752700A KA75270Z 3 TP RE-SET IC MC-0
IC1106 0IKE704200J KIA7042AF SOT-89 TP 4.2V VOL
IC603 0IKE704200J KIA7042AF SOT-89 TP 4.2V VOL
IC101 0IZZVC0115A M37272E8A(OTP) DIP 52P DIP R
IC1101 0IMCRO2001A OZ960S O2MICRO 20P SSOP R/TP
IC1110 0IMCRRH005A UM6K1N ROHM 6P SOT363 R/TP 3
IC1112 0IMCRRH005A UM6K1N ROHM 6P SOT363 R/TP 3
IC1121 0IMCRMZ001A MP1583DN MONOLITHIC POWER SY
IC1122 0IMCRMZ001A MP1583DN MONOLITHIC POWER SY
IC301 0IMCRMI006A "M52758FP MITSUBISHI 36PIN, R"
IC352 0ISO204000A "CXA2040AQ 32P,QFP BK IIC BUS"
IC501 0IMCRTW001B LG8801-H TECHWELL 160P QPFD
IC601 0IMCRMN014A MSP3440G QA B8 V3 MICRONAS 8
IC1 0ITH638300B "THC63LVDM83R THINE 56P,TSSOP"
IC650 0IPRPTI036A TPA3004D2PHPR TEXAS INSTRUME
IC801 0IPRPAD008B AD9883AKST-110 ANALOG DEVICE
IC351 0IMCRFA010A "KA7809R, FAIRCHILD 2P D-PAK,"
IC500 0IMCRFA016A KA78RH33RTF FAIRCHILD 2P D-P
IC701 0IPMGSK012A STR-W6853P SANKEN 6P T0-220
PC1 0ILI817000E LTV-817M-V(B) 4P BK PHOTO C
IC604 0ISS780800J "KA78M08R 3P,D-PAK TP VOL. RE"
IC702 0ISS431000A KA431AZ (LM431AZ)
Q101 0IFA270000A "2N7000TA TO-92, 3P TP LEVEL"
Q102 0IFA270000A "2N7000TA TO-92, 3P TP LEVEL"
L1201 6140VR0005B SLF7045T-330MR82 TDK 33UF SM
L1202 6140VR0005B SLF7045T-330MR82 TDK 33UF SM
L1203 6140VR0005B SLF7045T-330MR82 TDK 33UF SM
L1204 6140VR0005B SLF7045T-330MR82 TDK 33UF SM
DATE: 2004. 4. 22.
*S *AL LOC. NO. PART NO. DESCRIPTION / SPECIFICATION
L705 6140VR0008B SLF12575T-150M3R2 15UH SMD
L706 6140VR0008B SLF12575T-150M3R2 15UH SMD
L1 6210TCE001G HH-1M3216-501 CERATEC 3216MM
L101 6210TCE001G HH-1M3216-501 CERATEC 3216MM
L1101 6210TCE001A HB-1S2012-080JT CERATEC 2012
L1101 6210TCE001G HH-1M3216-501 CERATEC 3216MM
L119 6210TCE001A HB-1S2012-080JT CERATEC 2012
L1200 6210TCE001G HH-1M3216-501 CERATEC 3216MM
L204 6210TCE001A HB-1S2012-080JT CERATEC 2012
L205 6210TCE001A HB-1S2012-080JT CERATEC 2012
L206 6210TCE001G HH-1M3216-501 CERATEC 3216MM
L298 6210TCE001A HB-1S2012-080JT CERATEC 2012
L299 6210TCE001A HB-1S2012-080JT CERATEC 2012
L313 6210TCE001G HH-1M3216-501 CERATEC 3216MM
L351 6210TCE001G HH-1M3216-501 CERATEC 3216MM
L400 6210TCE001G HH-1M3216-501 CERATEC 3216MM
L402 6210TCE001G HH-1M3216-501 CERATEC 3216MM
L501 6210TCE001G HH-1M3216-501 CERATEC 3216MM
L515 6210TCE001G HH-1M3216-501 CERATEC 3216MM
L517 6210TCE001G HH-1M3216-501 CERATEC 3216MM
L581 6210TCE001A HB-1S2012-080JT CERATEC 2012
L601 6210TCE001G HH-1M3216-501 CERATEC 3216MM
L602 6210TCE001G HH-1M3216-501 CERATEC 3216MM
L603 6210TCE001G HH-1M3216-501 CERATEC 3216MM
L701 125-022K FERRITE 1UH NY 3.5*6.0MM AX
L702 125-022K FERRITE 1UH NY 3.5*6.0MM AX
L703 6210TCE001G HH-1M3216-501 CERATEC 3216MM
L704 6210TCE001G HH-1M3216-501 CERATEC 3216MM
L801 6210TCE001G HH-1M3216-501 CERATEC 3216MM
L802 6210TCE001G HH-1M3216-501 CERATEC 3216MM
L803 6210TCE001G HH-1M3216-501 CERATEC 3216MM
L99 6210TCE001G HH-1M3216-501 CERATEC 3216MM
R505 6210TCE001A HB-1S2012-080JT CERATEC 2012
R710 125-022K FERRITE 1UH NY 3.5*6.0MM AX
L401 0LA0272K139 27UH K 4X10.5 TP
L174 0LC0233002A 3.3UH CERATECH R/TP
L175 0LC0233002A 3.3UH CERATECH R/TP
L176 0LC0233002A 3.3UH CERATECH R/TP
L177 0LC0233002A 3.3UH CERATECH R/TP
L203 0LC0233002A 3.3UH CERATECH R/TP
L207 0LC1020101A 1UH 10% 2012 R/TC FI-B2012-1
L296 0LC0233002A 3.3UH CERATECH R/TP
L297 0LC0233002A 3.3UH CERATECH R/TP
L302 0LC1020101A 1UH 10% 2012 R/TC FI-B2012-1
L303 0LC1020101A 1UH 10% 2012 R/TC FI-B2012-1
L304 0LC1020101A 1UH 10% 2012 R/TC FI-B2012-1
L306 0LC1020101A 1UH 10% 2012 R/TC FI-B2012-1
L307 0LC1020101A 1UH 10% 2012 R/TC FI-B2012-1
L308 0LC1020101A 1UH 10% 2012 R/TC FI-B2012-1
IC1223 0TF492509AA SI4925DY TP TEMIC 30V 6.1A
IC1224 0TF492509AA SI4925DY TP TEMIC 30V 6.1A
IC2 0TF492509AA SI4925DY TP TEMIC 30V 6.1A
T1101 6170VH0002A UI-11.7 860000UH 1-CH 5W TRS
T1102 6170VH0002A UI-11.7 860000UH 1-CH 5W TRS
T1105 6170VH0002A UI-11.7 860000UH 1-CH 5W TRS
T1106 6170VH0002A UI-11.7 860000UH 1-CH 5W TRS
T701 6170VMCA65A EER3019 450UH RZ-15/20LA70
Q1 0TR387500AA CHIP 2SC3875S(ALY) BK KEC -
- 18 -
FET & TRANSISTOR
DIODEs
IC
COIL & CORE & INDUCTOR

DATE: 2004. 4. 22.
*S *AL LOC. NO. PART NO. DESCRIPTION / SPECIFICATION
Q100 0TR387500AA CHIP 2SC3875S(ALY) BK KEC -
Q1101 0TR387500AA CHIP 2SC3875S(ALY) BK KEC -
Q1101 0TR387500AA CHIP 2SC3875S(ALY) BK KEC -
Q1102 0TR387500AA CHIP 2SC3875S(ALY) BK KEC -
Q1103 0TR387500AA CHIP 2SC3875S(ALY) BK KEC -
Q1200 0TR150400BA CHIP 2SA1504S(ASY) BK KEC -
Q200 0TR387500AA CHIP 2SC3875S(ALY) BK KEC -
Q201 0TR387500AA CHIP 2SC3875S(ALY) BK KEC -
Q202 0TR387500AA CHIP 2SC3875S(ALY) BK KEC -
Q353 0TR150400BA CHIP 2SA1504S(ASY) BK KEC -
Q403 0TR150400BA CHIP 2SA1504S(ASY) BK KEC -
Q406 0TR387500AA CHIP 2SC3875S(ALY) BK KEC -
Q502 0TR150400BA CHIP 2SA1504S(ASY) BK KEC -
Q510 0TR150400BA CHIP 2SA1504S(ASY) BK KEC -
Q701 0TR387500AA CHIP 2SC3875S(ALY) BK KEC -
Q706 0TR322709AA "KTC3227 TP KEC - -Y, (KTC162"
Q801 0TR387500AA CHIP 2SC3875S(ALY) BK KEC -
Q802 0TR150400BA CHIP 2SA1504S(ASY) BK KEC -
IC1102 0TFFC80044A FDS8958A FAIRCHILD R/TP SO-8
IC1103 0TFFC80044A FDS8958A FAIRCHILD R/TP SO-8
IC1104 0TFFC80044A FDS8958A FAIRCHILD R/TP SO-8
IC1105 0TFFC80044A FDS8958A FAIRCHILD R/TP SO-8
L111 0RH1000D622 100 1/10W 5 D.R/TP
L112 0RH1000D622 100 1/10W 5 D.R/TP
L113 0RH1000D622 100 1/10W 5 D.R/TP
L114 0RH1000D622 100 1/10W 5 D.R/TP
L115 0RH1000D622 100 1/10W 5 D.R/TP
L116 0RH1000D622 100 1/10W 5 D.R/TP
L117 0RH1000D622 100 1/10W 5 D.R/TP
L118 0RH1000D622 100 1/10W 5 D.R/TP
L477 0RH0000D622 0 1/10W P-TYPE TAPPING
R10 0RH0000D622 0 1/10W P-TYPE TAPPING
R100 0RH3301D622 3.3K 1/10W 5 D.R/TP
R101 0RH1000D622 100 1/10W 5 D.R/TP
R102 0RH3301D622 3.3K 1/10W 5 D.R/TP
R103 0RH1000D622 100 1/10W 5 D.R/TP
R104 0RH3301D622 3.3K 1/10W 5 D.R/TP
R105 0RH1000D622 100 1/10W 5 D.R/TP
R106 0RH3301D622 3.3K 1/10W 5 D.R/TP
R107 0RH1000D622 100 1/10W 5 D.R/TP
R108 0RH3301D622 3.3K 1/10W 5 D.R/TP
R109 0RH1000D622 100 1/10W 5 D.R/TP
R1101 0RH1000D622 100 1/10W 5 D.R/TP
R1102 0RH1000D622 100 1/10W 5 D.R/TP
R1102 0RH1004D622 1.0M 1/10W 5 D.R/TP
R1105 0RH1004D622 1.0M 1/10W 5 D.R/TP
R1106 0RH1000D622 100 1/10W 5 D.R/TP
R1107 0RH0000D622 0 1/10W P-TYPE TAPPING
R1113 0RH0000D622 0 1/10W P-TYPE TAPPING
R1117 0RH1004D622 1.0M 1/10W 5 D.R/TP
R112 0RH4701D622 4.7K 1/10W 5 D.R/TP
R1121 0RH1004D622 1.0M 1/10W 5 D.R/TP
R113 0RH1000D622 100 1/10W 5 D.R/TP
R1132 0RH4702D622 47K 1/10W 5 D.R/TP
R1135 0RH5102D622 51K 1/10W 5 D.R/TP
R1136 0RH1003D622 100K 1/10W 5 D.R/TP
R1137 0RH0000D622 0 1/10W P-TYPE TAPPING
R114 0RH4701D622 4.7K 1/10W 5 D.R/TP
R1140 0RH2001D622 2.0K 1/10W 5 D.R/TP
DATE: 2004. 4. 22.
*S *AL LOC. NO. PART NO. DESCRIPTION / SPECIFICATION
R1143 0RH2702D622 27K 1/10W 5 D.R/TP
R115 0RH1000D622 100 1/10W 5 D.R/TP
R116 0RH0000D622 0 1/10W P-TYPE TAPPING
R118 0RH4701D622 4.7K 1/10W 5 D.R/TP
R120 0RH4302D622 43K 1/10W 5 D.R/TP
R1200 0RH1000D622 100 1/10W 5 D.R/TP
R1201 0RH1302D622 13K 1/10W 5 TA
R1204 0RH1802D622 18K 1/10W 5 D.R/TP
R1208 0RH1003D622 100K 1/10W 5 D.R/TP
R1209 0RH1003D622 100K 1/10W 5 D.R/TP
R1210 0RH1000D622 100 1/10W 5 D.R/TP
R1212 0RH3301D622 3.3K 1/10W 5 D.R/TP
R123 0RH0000D622 0 1/10W P-TYPE TAPPING
R124 0RH0000D622 0 1/10W P-TYPE TAPPING
R125 0RH1000D622 100 1/10W 5 D.R/TP
R126 0RH1000D622 100 1/10W 5 D.R/TP
R127 0RH4701D622 4.7K 1/10W 5 D.R/TP
R128 0RH4701D622 4.7K 1/10W 5 D.R/TP
R133 0RH1000D622 100 1/10W 5 D.R/TP
R134 0RH1000D622 100 1/10W 5 D.R/TP
R135 0RH1000D622 100 1/10W 5 D.R/TP
R138 0RH2202D622 22K 1/10W 5 D.R/TP
R139 0RH3301D622 3.3K 1/10W 5 D.R/TP
R140 0RH1000D622 100 1/10W 5 D.R/TP
R141 0RH3301D622 3.3K 1/10W 5 D.R/TP
R152 0RH1000D622 100 1/10W 5 D.R/TP
R153 0RH1000D622 100 1/10W 5 D.R/TP
R154 0RH1000D622 100 1/10W 5 D.R/TP
R155 0RH1000D622 100 1/10W 5 D.R/TP
R158 0RH0000D622 0 1/10W P-TYPE TAPPING
R167 0RH4701D622 4.7K 1/10W 5 D.R/TP
R168 0RH4701D622 4.7K 1/10W 5 D.R/TP
R169 0RH4701D622 4.7K 1/10W 5 D.R/TP
R170 0RH4701D622 4.7K 1/10W 5 D.R/TP
R174 0RH0752D622 75 1/10W 5 D.R/TP
R175 0RH0752D622 75 1/10W 5 D.R/TP
R176 0RH0752D622 75 1/10W 5 D.R/TP
R177 0RH0752D622 75 1/10W 5 D.R/TP
R180 0RH6801D622 6.8K 1/10W 5 D.R/TP
R183 0RH1202D622 12K 1/10W 5 D.R/TP
R184 0RH1003D622 100K 1/10W 5 D.R/TP
R185 0RH3300D622 330 1/10W 5 D.R/TP
R196 0RH4701D622 4.7K 1/10W 5 D.R/TP
R2 0RH0000D622 0 1/10W P-TYPE TAPPING
R202 0RH0472D622 47 1/10W 5 D.R/TP
R203 0RH0752D622 75 1/10W 5 D.R/TP
R204 0RH0752D622 75 1/10W 5 D.R/TP
R205 0RH1000D622 100 1/10W 5 D.R/TP
R206 0RH0752D622 75 1/10W 5 D.R/TP
R207 0RH5101D622 5.1K 1/10W 5 D.R/TP
R208 0RH4703D622 470K 1/10W 5 D.R/TP
R209 0RH5101D622 5.1K 1/10W 5 D.R/TP
R210 0RH4703D622 470K 1/10W 5 D.R/TP
R212 0RH4702D622 47K 1/10W 5 D.R/TP
R213 0RH1000D622 100 1/10W 5 D.R/TP
R214 0RH2702D622 27K 1/10W 5 D.R/TP
R221 0RH0000D622 0 1/10W P-TYPE TAPPING
R222 0RH0752D622 75 1/10W 5 D.R/TP
R238 0RH1000D622 100 1/10W 5 D.R/TP
R239 0RH1000D622 100 1/10W 5 D.R/TP
R242 0RH0752D622 75 1/10W 5 D.R/TP
R243 0RH0752D622 75 1/10W 5 D.R/TP
- 19 -
RESISTORs

DATE: 2004. 4. 22.
*S *AL LOC. NO. PART NO. DESCRIPTION / SPECIFICATION
R287 0RH4703D622 470K 1/10W 5 D.R/TP
R288 0RH4703D622 470K 1/10W 5 D.R/TP
R289 0RH0000D622 0 1/10W P-TYPE TAPPING
R301 0RH4701D622 4.7K 1/10W 5 D.R/TP
R302 0RH4701D622 4.7K 1/10W 5 D.R/TP
R305 0RH1000D622 100 1/10W 5 D.R/TP
R306 0RH1000D622 100 1/10W 5 D.R/TP
R310 0RH0752D622 75 1/10W 5 D.R/TP
R311 0RH0752D622 75 1/10W 5 D.R/TP
R312 0RH0752D622 75 1/10W 5 D.R/TP
R351 0RH6802D622 68K 1/10W 5 D.R/TP
R352 0RH1000D622 100 1/10W 5 D.R/TP
R353 0RH1000D622 100 1/10W 5 D.R/TP
R354 0RH0102D622 10 1/10W 5 D.R/TP
R355 0RH0102D622 10 1/10W 5 D.R/TP
R357 0RH0102D622 10 1/10W 5 D.R/TP
R361 0RH3300D622 330 1/10W 5 D.R/TP
R362 0RH4700D622 470 1/10W 5 D.R/TP
R363 0RH2200D622 220 1/10W 5 D.R/TP
R364 0RH1000D622 100 1/10W 5 D.R/TP
R365 0RH2200D622 220 1/10W 5 D.R/TP
R366 0RH2200D622 220 1/10W 5 D.R/TP
R377 0RH2200D622 220 1/10W 5 D.R/TP
R400 0RH0000D622 0 1/10W P-TYPE TAPPING
R410 0RH1000D622 100 1/10W 5 D.R/TP
R411 0RH0000D622 0 1/10W P-TYPE TAPPING
R412 0RH4700D622 470 1/10W 5 D.R/TP
R413 0RH2001D622 2.0K 1/10W 5 D.R/TP
R419 0RH9102D622 91K 1/10W P-TYPE TAPPING
R420 0RH6802D622 68K 1/10W 5 D.R/TP
R421 0RH4701D622 4.7K 1/10W 5 D.R/TP
R422 0RH2001D622 2.0K 1/10W 5 D.R/TP
R44 0RH1000D622 100 1/10W 5 D.R/TP
R492 0RH0102D622 10 1/10W 5 D.R/TP
R493 0RH0000D622 0 1/10W P-TYPE TAPPING
R496 0RH1000D622 100 1/10W 5 D.R/TP
R501 0RH1000D622 100 1/10W 5 D.R/TP
R502 0RH1000D622 100 1/10W 5 D.R/TP
R503 0RH1000D622 100 1/10W 5 D.R/TP
R504 0RH1000D622 100 1/10W 5 D.R/TP
R509 0RH1000D622 100 1/10W 5 D.R/TP
R512 0RH4701D622 4.7K 1/10W 5 D.R/TP
R513 0RH1004D622 1.0M 1/10W 5 D.R/TP
R516 0RH1000D622 100 1/10W 5 D.R/TP
R553 0RH0000D622 0 1/10W P-TYPE TAPPING
R555 0RH0000D622 0 1/10W P-TYPE TAPPING
R556 0RH0000D622 0 1/10W P-TYPE TAPPING
R574 0RH6800D622 680 OHM 1 / 10 W 5% D R/TP
R575 0RH0000D622 0 1/10W P-TYPE TAPPING
R576 0RH1000D622 100 1/10W 5 D.R/TP
R579 0RH4700D622 470 1/10W 5 D.R/TP
R580 0RH2200D622 220 1/10W 5 D.R/TP
R583 0RH1000D622 100 1/10W 5 D.R/TP
R584 0RH1000D622 100 1/10W 5 D.R/TP
R590 0RH1000D622 100 1/10W 5 D.R/TP
R591 0RH1000D622 100 1/10W 5 D.R/TP
R593 0RH1000D622 100 1/10W 5 D.R/TP
R594 0RH1000D622 100 1/10W 5 D.R/TP
R595 0RH1000D622 100 1/10W 5 D.R/TP
R596 0RH1000D622 100 1/10W 5 D.R/TP
R597 0RH1000D622 100 1/10W 5 D.R/TP
R598 0RH1000D622 100 1/10W 5 D.R/TP
DATE: 2004. 4. 22.
*S *AL LOC. NO. PART NO. DESCRIPTION / SPECIFICATION
R599 0RH1000D622 100 1/10W 5 D.R/TP
R614 0RH1000D622 100 1/10W 5 D.R/TP
R617 0RH2702D622 27K 1/10W 5 D.R/TP
R618 0RH0102D622 10 1/10W 5 D.R/TP
R621 0RH1004D622 1.0M 1/10W 5 D.R/TP
R622 0RH1000D622 100 1/10W 5 D.R/TP
R696 0RH0000D622 0 1/10W P-TYPE TAPPING
R707 0RH4700D622 470 1/10W 5 D.R/TP
R708 0RH8203D622 820K 1/10W 5 D.R/TP
R717 0RH3300D622 330 1/10W 5 D.R/TP
R722 0RH8202D622 82K 1/10W 5 D.R/TP
R723 0RH5601D622 5.6K 1/10W 5 D.R/TP
R725 0RH1800D622 180 1/10W 5 D.R/TP
R726 0RH9100D622 910 1/10W 5 D.R/TP
R732 0RH1302D622 13K 1/10W 5 TA
R734 0RH6801D622 6.8K 1/10W 5 D.R/TP
R738 0RH4702D622 47K 1/10W 5 D.R/TP
R739 0RH1502D622 15K 1/10W 5 D.R/TP
R742 0RH0000D622 0 1/10W P-TYPE TAPPING
R799 0RH0000D622 0 1/10W P-TYPE TAPPING
R801 0RH1000D622 100 1/10W 5 D.R/TP
R802 0RH1000D622 100 1/10W 5 D.R/TP
R803 0RH1000D622 100 1/10W 5 D.R/TP
R804 0RH1500D622 150 1/10W 5 D.R/TP
R805 0RH1500D622 150 1/10W 5 D.R/TP
R877 0RH1000D622 100 1/10W 5 D.R/TP
R893 0RH1000D622 100 1/10W 5 D.R/TP
R897 0RH2701D622 2.7K 1/10W 5 D.R/TP
R898 0RH0000D622 0 1/10W P-TYPE TAPPING
R908 0RH0752D622 75 1/10W 5 D.R/TP
R909 0RH0752D622 75 1/10W 5 D.R/TP
R910 0RH0752D622 75 1/10W 5 D.R/TP
R914 0RH1000D622 100 1/10W 5 D.R/TP
R916 0RH1000D622 100 1/10W 5 D.R/TP
RB1CB 0RH0000D622 0 1/10W P-TYPE TAPPING
RG1Y 0RH0000D622 0 1/10W P-TYPE TAPPING
RR1CR 0RH0000D622 0 1/10W P-TYPE TAPPING
L502 0RRZVTA001A MNR-14-E0A-J-101 R OHM 100
L503 0RRZVTA001A MNR-14-E0A-J-101 R OHM 100
L504 0RRZVTA001A MNR-14-E0A-J-101 R OHM 100
L505 0RRZVTA001A MNR-14-E0A-J-101 R OHM 100
L506 0RRZVTA001A MNR-14-E0A-J-101 R OHM 100
L507 0RRZVTA001A MNR-14-E0A-J-101 R OHM 100
L518 0RRZVTA001A MNR-14-E0A-J-101 R OHM 100
L521 0RRZVTA001A MNR-14-E0A-J-101 R OHM 100
L522 0RRZVTA001A MNR-14-E0A-J-101 R OHM 100
L523 0RRZVTA001A MNR-14-E0A-J-101 R OHM 100
L524 0RRZVTA001A MNR-14-E0A-J-101 R OHM 100
L525 0RRZVTA001A MNR-14-E0A-J-101 R OHM 100
L526 0RRZVTA001A MNR-14-E0A-J-101 R OHM 100
R702 0RKZVTA001C 8.2M OHM 1/2 W 5% TA52 UL PI
R703 0RKZVTA001K 0.47M OHM 1/2 W 5% TA52 PILK
R715 180-A01E 2 W RW ROUND G 2W 0.33J TA31
R727 0RD0472H609 47 1/2W 5 TA52
R736 0RD0472H609 47 1/2W 5 TA52
R704 0RS5602K619 56K OHM 2 W 5.00% TR
R705 0RS5602K619 56K OHM 2 W 5.00% TR
R706 0RS1203K607 120K OHM 2 W 5.00% TA62
R711 0RS5602K619 56K OHM 2 W 5.00% TR
R712 0RS5602K619 56K OHM 2 W 5.00% TR
R714 0RS5602K619 56K OHM 2 W 5.00% TR
FR704 0RP0020J809 0.02 OHM 1 W 20% TA52
- 20 -