
5
ENGENGLISH
SAFETY INSTRUCTIONS
yIf any of the following occur, unplug the
product immediately and contact your
local service centre.
- The product has been impacted by
shock
- The product has been damaged
- Foreign objects have entered the
product
- The product produced smoke or a
strange smell
This may result in fire or electric shock.
yUnplug the TV from AC mains wall socket
if you do not intend to use the TV for a
long period of time. Accumulated dust
can cause fire hazard and insulation
deterioration can cause electric leakage/
shock/fire.
yApparatus shall not be exposed to dripping
or splashing and no objects filled with
liquids, such as vases, shall be placed on
the apparatus.
CAUTION
yInstall the product where no radio wave
occurs.
yThere should be enough distance between
an outside antenna and power lines to
keep the former from touching the latter
even when the antenna falls.
This may cause an electric shock.
yDo not install the product on places such
as unstable shelves or inclined surfaces.
Also avoid places where there is vibration
or where the product cannot be fully
supported. Otherwise, the product may
fall or flip over, which may cause injury or
damage to the product.
yIf you install the TV on a stand, you need
to take actions to prevent the product from
overturning. Otherwise, the product may
fall over, which may cause injury.
yIf you intend to mount the product to a
wall, attach VESA standard mounting
interface (optional parts) to the back of the
product. When you install the set to use
the wall mounting bracket (optional parts),
fix it carefully so as not to drop.
yOnly use the attachments / accessories
specified by the manufacturer.
yWhen installing the antenna, consult with a
qualified service technician. If not installed
by a qualified technician, this may create
a fire hazard or an electric shock hazard.
yWe recommend that you maintain a
distance of at least 2 to 7 times the
diagonal screen size when watching TV.
If you watch TV for a long period of time,
this may cause blurred vision.
yOnly use the specified type of battery.
This could cause damage to the remote
control.
yDo not mix new batteries with old
batteries. This may cause the batteries to
overheat and leak.
yBatteries should not be exposed to
excessive heat. For example, keep away
from direct Sunlight, open fireplace and
electric heaters.
yDo not place non-rechargeable batteries
in charging device.
yMake sure there are no objects between
the remote control and its sensor.