LG 42WS10 User manual

www.lg.com
OWNER’S MANUAL
MONITOR SIGNAGE
42WS10
47WS10
55WS10
Please read this manual carefully before operating the your set and
retain it for future reference.
MONITOR SIGNAGE MODELS
ENG
ENGLISH

2
ENG
ENGLISH
TABLE OF CONTENTS
CONTENTS
4LICENSES
5ASSEMBLING AND
PREPARING
5 Accessories
6 Optional Accessories
7 Parts and buttons
8 Using the Mounting Cable Tie
8 Connecting the Speakers
9 Connecting the stand
9 Using the Kensington security system
10 Portrait Layout
11 Mounting on a wall
12 REMOTE CONTROL
14 USING THE MONITOR
14 Connecting to a PC
15 - RGB connection
15 - DVI-D connection
16 - HDMI connection
16 - Display Port connection
17 Adjusting the screen
17 - Selecting an image mode
17 - Customizing image options
18 - Customizing PC display options
18 Adjusting the sound
18 - Selecting an sound mode
19 - Customizing sound options
19 Using additional options
19 - Adjusting aspect ratio
21 - Using the input list
22 ENTERTAINMENT
22 - Connecting to a wired network
23 - Network Status
24 - Connecting USB storage devices
25 - Browsing files
26 - Viewing movies
30 - Viewing photos
33 - Listening to music
35 - Viewing the Contents List
36 - DivX® VOD Guide
37 - Using PIP/PBP
39 CUSTOMIZING SETTINGS
39 Accessing main menus
40 - PICTURE settings
43 - AUDIO settings
44 - TIME settings
45 - OPTION settings
50 - NETWORK settings
51 MAKING CONNECTIONS
52 Connecting to a HD receiver, DVD,
Camcorder, Camera, Gaming Device or
VCR player
52 - HDMI connection
52 - Component connection
53 - AV(CVBS) connection
53 Connecting to a USB
54 Connecting to the LAN
54 - LAN connection
55 Daisy Chain Monitors

3
ENG
ENGLISH
TABLE OF CONTENTS
56 TROUBLESHOOTING
59 SPECIFICATIONS
67 IR CODES
68 CONTROLLING THE MULTIPLE
PRODUCT
68 Connecting the cable
68 RS-232C Configurations
68 Communication Parameter
69 Command reference list
71 Transmission / Receiving protocol

ENGLISH
4LICENSES
LICENSES
Supported licenses may differ by model. For more information of the licenses, visit www.lg.com.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks
or registered trademarks of HDMI Licensing LLC.
ABOUT DIVX VIDEO: DivX is a digital video format created by DivX, LLC, a
subsidiary of Rovi Corporation. This is an official DivX Certified device that
plays DivX video. Visit divx.com for more information and software tools to
convert your files into DivX videos.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX
Certified device must be registered in order to play purchased DivX Video-
on-Demand (VOD) movies. To obtain your registration code, locate the
DivX VOD section in your device setup menu. Go to vod.divx.com for more
information on how to complete your registration.
DivX Certified to play DivX video up to HD 1080p, including premium
content.
DivX , DivX Certified and associated logos are trademarks of Rovi
Corporation or its subsidiaries and are used under license.
Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668;
7,515,710; 7,519,274
Manufactured under license from Dolby Laboratories. “Dolby” and the
double-D symbol are trademarks of Dolby Laboratories.

5
ENG
ENGLISH
ASSEMBLING AND PREPARING
ASSEMBLING AND PREPARING
Accessories
Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual product
and accessories.
yDo not use any pirated items to ensure the safety and product life span.
yAny damages or injuries by using pirated items are not covered by the warranty.
yThe accessories supplied with your product may vary depending on the model.
yProduct specifications or contents in this manual may be changed without prior notice due to upgrade
of product functions.
Remote control and Batteries Power Cord
CD (Owner's Manual)
/ Card
D-sub 15 pin signal cable Mounting Cable Tie
(Provided for 42WS10 and
47WS10 models only)
CAUTION
NOTE
P
A
G
E
INPUT
ENERGY
SAVING
MARK
ARC
ON
OFF

. , !

ABC

DEF

GHI

JKL

MNO

PQRS

TUV

1/a/A

- * #
WXYZ
CLEAR
MONITOR
PSM
AUTO
MUTE
BRIGHT
NESS
MENU
POWER
OK
S.MENU
ID
BACK TILE
ON OFF
EXIT

6
ENG
ENGLISH
ASSEMBLING AND PREPARING
Optional Accessories
Without prior notice, optional accessories are subject to change to improve the performance of the product,
and new accessories may be added. The illustrations in this manual may differ from the actual product and
accessories.
yCable holder/Cable tie may not be available in some areas or for some models.
yOptional accessories are not included for all models.
ST-200T
Stand
Screws
: Diameter 4.0 mm x Pitch 0.7 mm x
Length 10mm(Included Spring Washer)
Cable holder
/Cable Tie
Screws
Diameter 4.0 mm x Pitch 0.7 mm x
Length 8 mm(Included Spring Washer)
SP-2000
Speaker
NOTE
Stand kit Speaker kit

7
ENG
ENGLISH
ASSEMBLING AND PREPARING
yYou can set the Power indicator to on or off by selecting OPTION in the main menu.
Parts and buttons
Screen Marks Description
INPUT Changes the input source.
MENU Accesses the main menus, or saves your input and exits the menus.
Adjust the up and down.
Adjusts the volume level.
AUTO/SET Displays the current signal and mode.
Press this button to adjust the screen automatically (available only in RGB mode)
/ITurns the power on or off.
IR Receiver This is where the unit receives signals from the remote control.
Power Indicator This Indicator lights up blue when the display operates normally(on mode). If the display
In sleep mode (In Power Saving mode), this indicator color changes to amber.
Connection panel
Screen Buttons
Screen Marks
IR Receiver /
Power Indicator
yLighting On: Turned on
yLighting Off: Turned off
NOTE
MEZ63829306(REV00)

8
ENG
ENGLISH
ASSEMBLING AND PREPARING
Connecting the Speakers
- Only on some models.
1Connect an input signal cable to use before
installing the speakers.
3After installing your speakers, use holders and
cable ties to organize the speaker cables.
2Mount the speaker by using a screw as shown
in the following. Then connect the speaker
cable.
Using the Mounting Cable
Tie
- Applicable only to 42WS10 and 47WS10 models.
First, connect the input signal cable to be used.
Insert the cable tie into the bottom hole on the
back as shown in the figure to organize cables.
yThe Mounting cable tie is provided for
42WS10 and 47WS10 models only.
NOTE

9
ENG
ENGLISH
ASSEMBLING AND PREPARING
2Use the screws to secure the stand on the rear
side of the product as shown in the diagram.
Connecting the stand
- Only on some models.
1Place a soft cloth on the table and put the
product with the screen facing downward.
Connect the stand as shown in the following
picture.
Using the Kensington
security system
The Kensington security system connector is
located at the back of the Monitor. For more
information of installation and using, refer to the
manual supplied with the Kensington security
system or visit http://www.kensington.com .
Connect the Kensington security system cable
between the Monitor and a table.
yThe Kensington security system is optional.
You can obtain additional accessories from
most electronics stores.
NOTE

10
ENG
ENGLISH
ASSEMBLING AND PREPARING
Portrait Layout
- Only on some models.
When installing in a Portrait Layout, rotate the
monitor clockwise 90 degrees (when facing the
screen).

11
ENG
ENGLISH
ASSEMBLING AND PREPARING
Mounting on a wall
For proper ventilation, allow a clearance of 10
cm on each side and from the wall. Detailed
installation instructions are available from your
dealer, see the optional Tilt Wall Mounting Bracket
Installation and Setup Guide.
10 cm
10 cm
10 cm
10 cm 10 cm
If you intend to mount the Monitor to a wall, attach
Wall mounting interface (optional parts) to the back
of the set.
When you install the Monitor using the wall
mounting interface (optional parts), attach it
carefully so it will not fall.
1Please, Use the screw and wall mount interface
in accordance with VESA Standards.
2If you use screw longer than standard, the
monitor might be damaged internally.
3If you use improper screw, the product might
be damaged and drop from mounted position.
In this case, LG Electronics is not responsible
for it.
4VESA compatible.
5Please use VESA standard as below.
y785mm(31 inch) or greater
* Fastening screw: Diameter 6.0 mm x Pitch 1.0
mm x Length 10 mm
yDisconnect the power before installing or
moving the monitor. Otherwise electric shock
may occur.
yIf you install the Monitor on a ceiling or
slanted wall, it may fall and result in severe
injury. Use an authorized LG wall mount
and contact the local dealer or qualified
personnel.
yDo not over tighten the screws as this may
cause damage to the Monitor and void your
warranty.
yUse screws and wall mounts that meet the
VESA standard. Any damages or injuries by
misuse or using an improper accessory are
not covered by the warranty.
yUse screws that are listed on the VESA
standard screw specifications.
yThe wall mount kit includes an installation
manual and necessary parts.
yThe wall mount bracket is optional. You can
obtain additional accessories from your local
dealer.
yThe length of screws may differ depending
on the wall mount. Be sure to use the proper
length.
yFor more information, refer to the instructions
supplied with the wall mount.
CAUTION
NOTE

12
ENG
ENGLISH
REMOTE CONTROL
REMOTE CONTROL
P
A
G
E
INPUT
ENERGY
SAVING
MARK
ARC
ON
OFF

. , !

ABC

DEF

GHI

JKL

MNO

PQRS

TUV

1/a/A

- * #
WXYZ
CLEAR
OK
S.MENU
MONITOR
PSM
AUTO
MUTE
BRIGHT
NESS
MENU
ID
BACK TILE
ON OFF
EXIT
POWER
/I(POWER)
Turns the Monitor on or off.
MONITOR ON / OFF
Turn off the monitor and then
turn it back on.
1/a/A Button
This button selection is not
applicable.
ENERGY SAVING
Adjusts the brightness of
the screen to reduce energy
consumption.
INPUT
Selects the input mode.
Number and Alphabet buttons
Enters numbers.
The alphabet selection is not
applicable.
CLEAR
This button selection is not
applicable.
PSM
Selects the Picture Status
Mode.
MUTE
Mutes all sounds.
ARC
Selects the Aspect Ratio
Mode.
Volume Up / Down
Adjusts the volume level.
BRIGHTNESS Key
Adjust the brightness by
pressing the Up and Down
buttons on the remote control.
In USB mode, the OSD menu
has the Page function to move
to the next file list.
The descriptions in this manual are based on the buttons of the remote control. Please read this manual
carefully and use the Monitor correctly.
To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching and ends to the
label inside the compartment, and close the battery cover.
To remove the batteries, perform the installation actions in reverse.
yDo not mix old and new batteries, as this
may damage the remote control.
yMake sure to point the remote control at the
remote control sensor on the Monitor.
CAUTION

13
ENG
ENGLISH
REMOTE CONTROL
P
A
G
E
INPUT
ENERGY
SAVING
MARK
ARC
ON
OFF

. , !

ABC

DEF

GHI

JKL

MNO

PQRS

TUV

1/a/A

- * #
WXYZ
CLEAR
OK
S.MENU
MONITOR
PSM
AUTO
MUTE
BRIGHT
NESS
MENU
ID
BACK TILE
ON OFF
EXIT
POWER
S.MENU
(SuperSign Menu Key)
This button selection is not
applicable.
EXIT
Clears all on-screen displays
and returns to Monitor
viewing from any menu.
TILE
Selects the TILE Mode.
MENU (See p.39)
Accesses the main menus
or saves your input and exit
menus.
Navigation buttons
Scrolls through menus or
options.
OK
Selects menus or options and
confirms your input.
BACK
Allows the user to move back
one step.
USB Menu control buttons
Controls media playback.
ID ON/OFF
When more than one monitor
is present in the same room,
this allows you to control them
individually.
AUTO
Automatically adjusts picture
position and minimizes image
instability.(RGB input only)

14
ENG
ENGLISH
USING THE MONITOR SET
USING THE MONITOR
Connecting to a PC
Your Monitor supports the Plug & Play* feature.
* Plug & Play: This is the function that allows a PC
to use the monitor without installing a driver.
NOTE
yConnect the signal
input cable and tighten
it by turning the screws
clockwise.
yDo not press the
screen with your finger for a long time as
this may result in temporary distortion on the
screen.
yAvoid displaying a fixed image on the screen
for a long period of time to prevent image
burn. Use a screensaver if possible.
yIt is recommended to use the Monitor with
the HDMI connection for the best image
quality.
yUse a shielded signal interface cable, such
as D-sub 15 pin signal cable and DVI cable,
with a ferrite core to maintain standard
compliance for the product.
yIf you turn the Monitor on when the set
becomes cold, the screen may flicker. This
is normal.
ySome red, green, or blue spots may appear
on the screen. This is normal.
CAUTION

15
ENG
ENGLISH
USING THE MONITOR SET
DVI-D connection
Transmits the digital video signal from your PC to
the Monitor. Connect the PC and the Monitor
set with the DVI cable as shown the following
illustrations.
Select DVI-D input source on the monitor.
RGB OUT (PC) AUDIO OUT
RGB connection
Transmits the analog video signal from your PC to
the Monitor. Connect the PC and the Monitor
set with the 15 pin signal cable as shown the
following illustrations.
Select RGB input source on the monitor.
yUse the standard Macintosh
adapter since an incompatible
adapter is available in the
market. (Different signaling
system)
yApple computers may require an adapter to
connect to this monitor. Call or visit their web
site for more information.
NOTE
AUDIO OUT
DVI OUT
Macintosh Adapter
(not included)
(not included)
(not included)
(not included)

16
ENG
ENGLISH
USING THE MONITOR SET
HDMI connection
Transmits the digital video and audio signals from
your PC to the Monitor. Connect the PC and the
Monitor with the HDMI cable as shown in the
following illustrations.
Select HDMI input source.
Display Port connection
Transmits the digital video and audio signals from
your PC to the Monitor. Connect the PC and the
Monitor with the Display Port cable as shown in
the following illustrations.
Select Display Port input source.
yUse a High Speed HDMI™ Cable.
yPlease check the PC environment if you
cannot hear the sound in HDMI mode. Some
PCs require you to manually change the
default audio output to HDMI.
yIf you want to use HDMI PC mode, you must
set PC/DTV to PC mode.
yWhen HDMI PC is used, a compatiblity
problem might occur.
NOTE
HDMI
DP OUT
(not included)
(not included)

17
ENG
ENGLISH
USING THE MONITOR SET
Adjusting the screen
Selecting an image mode
Display images in its optimized settings by
selecting one of the preset image modes.
1Press MENU to access the main menus.
2Press the Navigation buttons to scroll to
PICTURE and press OK.
3Press the Navigation buttons to scroll to
Picture Mode and press OK.
4Press the Navigation buttons to scroll to an
image mode you want and press OK.
Customizing image options
Customize basic and advanced options of each
image mode for the best screen performance.
1Press MENU to access the main menus.
2Press the Navigation buttons to scroll to
PICTURE and press OK.
3Press the Navigation buttons to scroll to
Picture Mode and press OK.
4Press the Navigation buttons to scroll to an
image mode you want and press OK.
5Select and adjust the following options, and
then press OK.
Mode Description
Vivid Adjusts the video image for the retail
environment by enhancing the contrast,
brightness, color, and sharpness.
Standard Adjusts the image for a normal
environment.
Cinema Optimizes the video image for a cinematic
look to enjoy movies as if you are in a
movie theater.
Sport Optimizes the video image for high and
dynamic actions by emphasizing primary
colors such as white, grass, or sky blue.
Game Optimizes the video image for a fast
gaming screen such as PCs or games.
5When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
Option Description
Backlight Adjusts the brightness of the screen
by controlling the LCD backlight. If
you decrease the brightness level,
the screen becomes darker and the
power consumption will be reduced
without any video signal loss.
Contrast Increases or decreases the gradient
of the video signal. You may use
Contrast when the bright parts of the
picture are saturated.
Brightness Adjusts the base level of the signal in
the picture. You may use Brightness
when the dark areas of the picture are
saturated.
Sharpness Adjusts the level of crispness in the
edges between the light and dark
areas of the picture. The lower the
level, the softer the image.
Color Adjusts intensity of all colors.
Tint Adjusts the balance between red and
green levels.
Color Temp. Set to warm to enhance hotter Colors
such as red, or set to cool to make
picture bluish.
Advanced
Control
Customizes the advanced options.
Refer to the Advanced image options.
(See p.42)
Picture Reset Restores the options to the default
setting.
6When you are finished, press EXIT.
When you return to the previous menu, press
BACK.

18
ENG
ENGLISH
USING THE MONITOR SET
Customizing PC display options
Customize options of each image mode for the
best image quality.
yThis function works in the following mode:
RGB[PC] mode.
1Press MENU to access the main menus.
2Press the Navigation buttons to scroll to
PICTURE and press OK.
3Press the Navigation buttons to scroll to
Screen and press OK.
4Select and adjust following options, and then
press OK.
Option Description
Resolution Selects a proper resolution. See
“Customizing PC display options”.
Auto
Config.
Adjusts the screen position, clock, and
phase automatically.
The displayed image may be unstable for
a few seconds while the configuration is
in progress.
Position/
Size/Phase
Adjusts the options when the picture is
not clear, especially when characters are
shaky. Run Auto Config. before adjusting
these.
Reset Restores the options to the default
setting.
5When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
Adjusting the sound
Selecting an sound mode
This Monitor has 5 preset sound modes to
compliment different types of video content.
1Press MENU to access the main menus.
2Press the Navigation buttons to scroll to
AUDIO and press OK.
3Press the Navigation buttons to scroll to Sound
Mode and press OK.
4Press the Navigation buttons to scroll to a
sound mode you want and press OK.
Mode Description
Standard Select when you want standard-quality
sound.
Music Select when you listen to music.
Cinema Select when you watch movies.
Sport Select when you watch sport events.
Game Selects when you play games.
5When you are finished, press EXIT.
When you return to the previous menu, press
BACK.

19
ENG
ENGLISH
USING THE MONITOR SET
Customizing sound options
You may customize options of each sound mode
for the best sound quality.
1Press MENU to access the main menus.
2Press the Navigation buttons to scroll to
AUDIO and press OK.
3Press the Navigation buttons to scroll to Sound
Mode and press OK.
4Press the Navigation buttons to scroll to a
sound mode you want and press OK.
5Select and adjust following options, and then
press OK.
Option Description
Infinite
Sound
LG's Infinity Sound option provides 5.1
channel stereo quality sound from two
speakers.
Treble Controls the dominant sounds in the
output. When you turn up the treble, it
will increase the output of the higher
frequency range.
Bass Controls the softer sounds in the
output. When you turn up the bass, it
will increase the output of the lower
frequency range.
Reset Resets the sound mode to the default
setting.
6When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
Using additional options
Adjusting aspect ratio
Resize the image to view the image at its optimal
size by pressing ARC while you are watching
content.
yIf a fixed image displays on the screen for a
long period of time, it will be imprinted and
become a permanent disfigurement on the
screen. This is “image burn” or “burn-in” and
not covered by the warranty.
yIf the aspect ratio is set to 4:3 for a long
period of time, image burn may occur on the
letterboxed area of the screen.
yYou can also change the image size by
accessing the main menus.
CAUTION
NOTE
MODE
ARC
AV Component RGB Display
Port
DVI-D HDMI
PC DTV PC DTV PC DTV PC
16:9 o o o o o o o o o
Just Scan x o x o x o x o x
1:1 x x o x o x o x o
4:3 o o o o o o o o o
Zoom o o x o x o x o x
Cinema
Zoom 1
o o x o x o x o x

20
ENG
ENGLISH
USING THE MONITOR SET
- 4:3 : This selection will allow you to view a
picture with an original 4:3 aspect ratio, black
bars will appear on both the left and right of the
screen.
- Zoom : This selection will allow you to view the
picture without any alteration, while filling the
entire screen. However, the top and bottom of
the picture will be cropped.
- Cinema Zoom 1 : Choose Cinema Zoom
when you want to enlarge the picture in correct
proportion. Note: When enlarging or reducing
the picture, the image may become distorted.
- 16:9 : This selection will allow you to adjust the
picture horizontally, in linear proportion, to fill the
entire screen(useful for viewing 4:3 formatted
DVDs).
- Just Scan : This Selection will allow you view
the picture of best quality without loss of original
picture in high resolution image. Note: If there is
noise in original Picture, You can see the noise
at the edge.
- 1:1 : The aspect ratio is not adjusted from the
original. (Only Display Port PC, HDMI PC,
DVI-D PC, RGB PC)
Just Scan