LG S1T1 User manual

2
Safety warning
Caution
Do not place any objects within 15cm of the unit.
The unit reaches high temperatures creating the risk of burn injuries.
When dealing with system components, strictly abide by the instruction manual. Physical contact with the
soldering on the backside of components may cause severe injury.
Only use compatible devices with the system ports, or the system and devices risk being damaged.
Related to damage to the HDD and data:
- during installation or disconnection of the system, ensure that the system does not experience any
external physical shocks.
- During the operation of the HDD, short surges and stoppages of power may cause the system to turn off
and on quickly.
- there may be a sudden stoppage of electricity during operation
- avoid moving the system during operation of the HDD, which may cause external physical shock
– e.g. virus infections.
In the event of the administrator forgetting the password, restoration is impossible. Hence safeguard the
password.
Do not use damaged disks. Product can be damaged.
Do not dismantle or change the structure of the system in any way. This may cause electric shock.
In the event of the cover being removed during operation, the user risks electric shock, injury, and damage
to the system.
When transporting the system, first turn off the system and disconnect the unit from the power source.
Sudden tension in cables can cause severe damage to the system. Loose cables can cause injury.
Take caution when handling the system so as not to corrupt the hard disk data.
- Take caution not to bump or expose the system to extreme temperatures, as it may damage the sensitive
hard disk.
- Take caution when turning on the electricity, as during this time any external bumps to the system may
corrupt the hard disk data.
- The manufacturer disclaims all responsibility for loss of hard disk data.
1
5
2
8
9
3
4
10
6
7
※
To create a new password, the system must be re-initialized. In this case, all data will be lost, and data
recovery will be impossible, for security reasons. The manufacturer disclaims all responsibility in the event
of this occurrence.

3
Safety warning
Do not use damaged electrical cords. This may cause electric shock, and is a fire hazard.
Always check and use correct voltage to avoid electric shock, severe damage to the system, and fire.
If you hear sound from power cord or adapter, unplug the power cord from the outlet immediately.
If water or foreign substances go into the adapter or inside of the products, unplug the power cord from
the outlet.
Use a grounded cord and grounded socket to avoid electric shock and damage to components.
Ensure that electrical cords are correctly plugged into the sockets to avoid fire.
Ensure that electrical cords are not damaged or do not have heavy objects placed on them. Keep electrical
cords away from children and pets. Damaged cords may cause electrical shock or fire.
Do not handle the electrical cord with wet hands, as this may cause shock and injury.
When removing the plug from the socket, ensure that the plug is handled and not the cord. Otherwise this
may cause damage to the plug and even fire.
1
5
2
8
9
Keep the power cords and sockets clean at all times to avoid fire and electrical shock.
Do not block vents, as this will cause system damage.
If you drop or damage the system, unplug the power cord from the outlet.
Prior to cleaning the system, always disconnect the power, to avoid damage and electric shock.
In the event of lighting and thunderstorms, immediately physically disconnect the system from any power
source, to avoid damage to the system.
Keep the system away from direct sunlight to avoid overheating, and melting of the case, which may
eventuate in fire and injury.
If the system smokes or if you smell burning, stop using it and unplug the power cord from the outlet.
Do not place flammable objects, candles or cigarettes on the system, as this may cause fire
Keep heating devices and other electrical components at a distance from the system to avoid case melt-
ing, and hence the danger of damage, fire, and electric shock.
Before disassembling the system, always ensure physical disconnection of the electrical cable from the
socket.
10
11
12
13
14
15
16
17
18
19
3
4
6
7
Warning

4
Safety warning
Warning
Do not disassemble the power supply, to avoid the danger of electric shock.
Keep children away from the system, as consuming any parts will cause serious injury. In the event of swal-
lowing any parts, such as screws, immediately seek medical treatment.
Ensure that there are no loose or exposed metallic objects inside the case, to avoid the danger of damage,
fire and electric shock.
Ensure that multipoint power sockets are not overloaded, to avoid the danger of fire and electric shock.
Ensure that cords are always neatly arranged and are not trapped under the system or other heavy objects.
When connecting and disconnecting the electrical cord, take care in handling the socket to avoid the
danger of electric shock.
Ensure that hands are never used, to avoid damaging the system and electric shock. Always use screw
drivers for work inside the system.
21
22
23
24
25

5
Table of contents
1. Product Introduction
10
08
11
- 1 Product features
- 2 Product components and support OS
- 3 Name of the product parts
5. Using a network
24 - 25
24
26 - 27
28 - 29
- 1 Connecting on Windows OS
- 2 Connecting on MAC OS
- 3 Connecting on Linux OS
4. Using a network storage
20
17 - 19
08 - 09
17
21
22 - 23
- 1 Using a NAS Detector
- 2 Using a web menu
- 3 Using a network folder
- 4 Using a NAS Monitor
- 1 Features and support OS environment
- 2 Installing a NAS Detector
2. Product Installation - Installing a network storage 12
- 14
3. Installing a program 15
15
16
6. System set-up
33 - 34
35 - 38
30 - 32
30
39
40
41
42 - 44
46
45
47
51
- 1 Network set-up
- 2 Remote access
- 3 Connect to Wireless Network
- 4 Setting up date and time
- 5 Hard drive set-up
- 6 Bad sector recovery (Active BSR)
- 7 Power supply management
- 8 Language set-up
- 9 Firmware
- 10 Initialization and configuration value back-up
- 11 System set-up Mail Notification
- 12 System set-up Checking status information set-up
- 13 Checking a log
49 - 50
48

6
9. File back-up service
74 - 75
69 - 73
69
- 1 USB back-up set-up
- 2 Time Machine
10. File share service 76
76 - 77
78 - 80
81 - 88
- 1 File server
- 2 Network printer
- 3 iSCSI
7. LG Network Storage share set-up
54
52 - 53
52
- 1 User set-up
- 2 Folder creation/deletion/editing/authority set-up
8. Multimedia service
59
55
- 1 Media Server
- 2 iTunes
- 3 Home Monitoring
- 4 Setting Port for Home Monitoring
55 - 58
60 - 65
66 - 68
11. The top menu
89 - 90
91
89
- 1 File viewer
- 2 My information
Table of contents

7
15. Initialization of LG Network Storage
16. Supplement: Open source software information
13. Network storage management and self-diagnosis function
12. Mobile UI
14. Setting up method of a network sharing device
91 - 92
100
97 - 99
93 - 94
95 - 96
Table of contents

8
1 - 1. Product Introduction Product features

9
1 - 1. Product Introduction Product features 1 - 1. Product Introduction Product features

10
Thank you for purchasing a LG NETWORK STORAGE.
Please verify that if there are the components are present as follows.
1 - 2. Product introduction
Product components and support OS
Network Storage
Pictures or photographs used in the user manual are subject to change in accordance with
the components of the model.
Support OS
LG Network Storage
- Windows XP, Server 2003, Vista, Windows 7
- Mac OS 10.x or higher
- Linux (Fedora, Suse, Ubuntu)
PC S/W
NAS Detector
NAS Monitor
Nero BackItUp & Burn
Support OS
Windows XP, Server 2003, Vista, Mac OS 10.x or higher, Windows 7
Windows XP, Server 2003, Vista, Windows 7
Acrobat Reader
Flash Player
Installation wizard
Windows, Mac
Windows, Mac
Windows XP(SP3 or higher), Server 2003, Vista, Windows 7
Windows XP(SP2 or higher), Vista, Windows 7
PC S/W
Quick Installation Guide
Power supply cord and
adaptor
LAN cable
Product Warranty PC S/W Installer

11
Please be familiar with names of the parts of the product.
1 - 3. Product introduction Name of the product parts
(Front)
ODD Slot hole : This is where you insert the disc.
※
Supporting media are subject to change in accordance with the product.
※
Insert the disc, label-side up, about quarter-way into the drive slot till a slight resistance is felt.
※
To turn off LG Network Storage, press the power button until you hear a beep.
LG Network Storage will start to turn off when you get your hand off after hearing a beep
which informs turning off.
Power button : A button to switch on and off the power supply
USB port : USB 2.0 interface
USB port : USB 2.0 interface
LAN port : This is where you connect a LAN cable.
FAN : A device that withdraws air to ventilate or cool off.
DC port : This is a port where you connect a power supply adaptor.
(Back)
HDD/ODD Lamp
4
Power LED
5 6 7 8
9
9

12
2. Product installation Installing Network Storage
1. Connect LAN port of Network Storage with LAN port of a network equip-
ment (IP network sharing device / router / hub / switch) using a LAN cable
enclosed, or directly connect the LAN port of the PC.
When using the network equipment (IP network sharing device/switch/hub) :
Connect LG Network Storage to user’s PC using hub/switch/router as in the following.
In an environment where there is DHCP server, after connecting Network Storage
to IP Network sharing device/switch/hub, choose receiving IP automatically, then
the network information will be retrieved from DHCP server. In case you use a
specific IP address assigned from network IP administrator, you can easily install
if you prepare by receiving assignment of IP address, sub-net mask, standard
gateway, DNS information.
network sharing device
(Shapes may vary depending
on the network sharing device.)
*
Connecting wired LAN.
* Network Storage
*
※
※
Please install in the order instructed on the picture.
When there are not enough ports, connect to HUB or switch for usage, and when router is
added, we suggest that the router be set on HUB mode for use.

13
2. After checking the connection of the power supply cable of LG Network
Storage, press the power button at the back and start LG Network Storage.
2. Product installation Installing Network Storage
Booting will start with an alarm when LG Network Stor-
age’s power on the back is turned on.
LAN cable
Desktop PCNetwork Storage
When connecting with PC directly without network equipment :
A
Please connect LG Network Storage directly to PC using a LAN cable.
B
Click the right button on the icon
“Internet Access” -> Open Net-
work and Sharing Center -> Click
Local Area Connection

14
2. Product installation Installing Network Storage
Please change the IP of the PC as follows if the window of local area connection state
popsup. (Example)
properties -> When you double-click internet protocol Version4 (TCP/IPv4), a window
that is able to change the IP of the PC, and then it makes the change.
Please change the IP of NAS using a NAS Detector.
NAS Detector -> Change Network Info -> Click on ‘apply change’ after changing
(4-1. Refer to Using Network Storage Using NAS Detector)
Click OK after entering password.
※
When you connect Network Storage directly with PC using a LAN cable, wire
internet of the PC is not connected
Enter the password,
‘admin’

15
“LG Network Storage PC Software Installer” CD that is provided on purchasing
LG Network Storage provides programs as in the following.
3 - 1. Program installation
Features and support OS environment
1. NAS Detector
2. NAS Monitor
3. Nero backitup&burn
“NAS Detector” provides a function of easily and quickly finding LG Network Stor-
age present on the user’s network.
“NAS Monitor” provides a function of checking the state of LG Network Storage in
real time as well as a simple control.
“Nero backitup&burn” is a software that protects and stores data for backup and
restoration.
“LG Network Storage Install Wizard” is a program that helps you to set up network
which is complicated to do without in an easy way.
Program you can install varies in accordance with the user’s OS environment.
※
4. LG NAS Installation Wizard
Program
Windows Mac Linux
Flash Player
Acrobat Reader
NAS Detector
NAS Monitor
Nero backitup&burn
LG NAS Installation Wizard
Supporting operating system

16
The name of Network Storage is ‘LG Network Storage’ on web UI.
3 - 2. Program installation NAS Detector installation
Install ‘NAS Detector’ on the
user’s PC by clicking ‘NAS
Detector’.
A
1. Insert “LG Network Storage PC Software Installer”
CD that is provided with the system into an optical drive (CD/DVD drive) of the user’s PC.
2. A pop-up as below appears due to automatic operation.
3. Upon installation completion, choose a language you will use along with a creatioin of
short-cut icon.
Cautions
You should not put in‘Network
Storage’.
※
Click on the icon
if a flash player is not
installed on the PC
If you want to install NAS
Monitor, Nero BackItUp
& Burn program, click
on NAS Monitor, Nero
BackItUp & Burn.
LG NAS Install Wizard is a program that helps you to install NAS and set a complicated
network easily. (DDNS)
If you click the ‘User Manual’ button, you can download the user manual in various
languages through the web.
B
Some routers may not support LG Network Storage.
※
A

17
This explains about how to use NAS Detector and NAS Monitor.
About detailed explanation in regard to using bundle program, please refer to
manual within the program itself after program installation. (Nero backitup&burn)
4 - 1. Using Network Storage Using NAS Detectorlation
1. After checking there has been a correct network connection of the PC, operate the
program by double-clicking on a ‘NAS Detector’ icon created on a desktop.
2. ’NAS Detector’ automatically finds LG Network Storage, which is connected to the
user’s network currently. Once the search is completed, it shows resulted ‘MAC address’, ‘IP
address’, ‘Host name’ of LG Network Storage in order.
A
MAC address : It is a unique
number of each product of LG
Network Storage, and displayed
on the label at the back of a
mainframe.
Host name : LG-NAS-S1T1
B
AB
In case you cannot find LG Network Storage you want to connect, search once more by
clicking on ‘Search network’ button. If you cannot search with ’NAS Detector’, please check
the state of network connection. As for a method to set-up an IP address manually, please
refer to 6-1. System set-up [Network set-up].
※

18
4 - 1. Using Network Storage Using NAS Detectorlation
3. When you choose LG Network Storage information that is searched, basic network
information of Network Storage such as sub-net mask, standard gateway, DNS etc. and
‘Network information change’, ‘Open Web menu’, ‘Open Network folder’ buttons are
displayed.
4. You can change relevant information such as IP address etc. with a click on ‘Change
Network Info’ button.
※
For“NAS Detector” program to be normally operated, the user’s PC should be connected
to the same IP network sharing device / switch / hub as LG Network Storage.
※
In case of an environment of IP network
sharing device or a presence of DHCP
server on the network, option for the
choice of DHCP appears. If you do not
have specially assigned IP address, you
can either use the IP address “NAS Detec-
tor” found or choose DHCP option and
receive an automatic assignment of the IP
address.

19
4 - 1. Using Network Storage Using NAS Detectorlation
5. You can access a web menu of LG Network Storage when you click on ‘Open Web
Menu’.
NAS web menu short-cut
NAS network folder short-cut
6. You can access LG Network Storage network folder when you click on ‘Open Network
Folder’.
7. When you click on ‘Open Web Menu’ or ‘Open Network Folder’, you can choose ‘yes’
on a message window that pops up and add a short-cut icon on the desktop. After-
wards, you can have an easier access to Network Storage web menu or network folder
using the short-cut icon.

20
On web menu, you can manage LG Network Storage use including setting up a
network information of LG Network Storage, share management, service man-
agement. You can also set up data storage using DVD drive, back-up of mobile
device on this.
4 - 2. Using Network Storage Using web menu
Due to security reason, it is logged out au-
tomatically in case you do not perform any
action for 20 minutes after logging in.
※
※
You can change a set-up of
Network Storage.
LG - NAS _ We
bMENU
A
Click on ‘open web
menu’
Choose on a pop-up
window of ‘web menu
short-cut’.
B
A
Logging in by entering
an user ID, ‘admin’, and a
password, ‘admin’.
Select the language you want
Please change the password
for security.
(web menu -> User account
-> user -> change password
after clicking on ‘admin’
※
B