LG 42PX3DCV - Plasma Panel With TV Tuner User manual

P
Lnual carefully and completely before
reference.
number of the TV in the
cover and relate this
ulre service,

Waming!Cau#on
I;
arninq
WARNING/CAU_ON
WAR NiNGiCA UTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR SACK) NO USER
SERVICEABLE PARTS INS[DE_ REFER TO QUALIFIED SERVICE PERSONNEL,
The _ightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to
the presence of uninsuJated "_ngerous voltage' within the product's enclosure that may be of suffi-
cient magnffude to constitute a risk of electric shock to persons
The exclamation point within an equilateral tdang_e is intended to alert the user to the presence of
important o_rating and maintenance (servidng) instructions in the literature accompanying the appD
ance,
WAR NING/CA UTION:
TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE,
FCC NOTICE
AClass Bdigital device
This equipment has been tested and found to compty with the limits for a Class B dig_aJ device, pursuant to Part
15 of the FCC Rules. These limits are designed to provi_ reasonab{e protection against harmful interference in
a residentia_ installation. This equipment _nerates, uses and can radiate radio frequency energy and if not
insta_ied and used in accordance with the instructions may cause harmful interference to radio communications,
However, there is no guarantee that interference witi not occur in a pa_cuiar instailaflon ff this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equip_nt off
and on, the user is encouraged to t_ to correct the interference by one or more of the following measures:
- Reorient or retocate the receiving antenna,
ohcrease the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consuff the deaQer or an experienced radioiTV technician for help.
•Any changes or modifications not expressly approved by the party responsible for compli-
ance could void the user's authority to operate the equipment,
Do not attempt to modify this preduct in any way without written authod_tion from LG Electronics. Unauthorized mod_
ificetion could void the user's authority to o_rate this product.
COMPLIANCE:
The responsible pa_ for this product's compliance is:
LG Electronics U.S.A., _nc
1_ Sy_v_ Avenue, Eng_woed Cliffs, NJ 07632
1°800-243_
http://www.lgusa.com
WARNI NGiCAUTION
TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE,
jJ
2 Plasma TV

SafetyInstrucliens
fIMPORTANT SAFETY INSTRUCTIONS
important safety instructions shall be provided with each apparatus. This information shah be given in a separate bookiet or
sheet, or be located before, any o_rating instructions in an instruction for installation for use and supplied with the appara-
tus. This information sh_ll be given in a language acceptable to the cou_ where the apparatus is intended to be used. The
important safety instructions ehal_ be entitled 'Important Safety lnstructions"_ The foiiowing safety instructions shah be [nctud_
ed where applicable, and, when used shah _ ve_atJm as follows Additional safety infor_tion may be inc_u_d by adding
statements after the end of the fe]Jowing safety instruction list. At the manufacturer's op_on, a picture or drawing that i_lus-
trates the intent of a specific safety inst_ction may be placed immediately adjacent to that safety instruc_on :
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
8. Do not install near any heat sources such as radiators_ heat registers, stoves, or other apparatus (including ampli-
fiers)that produce heat.
9. Do not defeat the sa{ety purpose of the polarized or grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two blades and a third grounding prong, The wide blade or the
third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs_ convenience receptacles_ and the
point where they exit from the apparatus.
11. Only use attachments/accessories s_cified by the manufacturer:
12., Use only with the cad, stand, tripod, bracket, or table spacified by the n-_nufacturer, or sold with the apparatus=
When a _rt is used, use caution when moving the cart!apparatus combination to avoid injury from Up-over.
PO_G'ABLE CA_ WARNING
J
Owner's Manual 3

SarelyInstructions
I ions
t3.
14,
Unplug this apparatus during lightning storms or when unused for long periods of time.
Refer all servicing to qualified service _rsonneL Servicing is required when the apparatus has been damaged
in any way, such as power_supply cord or plug is damaged, liquid has been spilled or objects have fallen into
the apparatus, the apparatus has exposed to rain or moisture, does not operate normally, or has been dropped.
15. CAUTION concerning the Power Cord :
16.
17,
Most appliances recommend they be placed upon adedicated circuit; that
is, a single outlet circuit which pawers only that app|tance and has no
additional outlets or branch circuits. Check the specification page of
this owner's manual to be certain,
Do not overload wall outlets. Overloaded wall outlets, loose or damaged
wall outlets, extension cords, frayed power cords, or da_ged or
cracked wire insulation are dangerous. Any of these conditions could
result in electdc shock or fire. Periodically examine the cord el your
appliance, and if its appearance indicates damage or deterioration,
unplug it, discontinue use of the appliance, and have the cord replaced
with an exact replacement part by an authorized servicer.
Protect the power cord from physical or mechanical abuse, such as being
twisted, kinked, pinched, closed in adoor, or Hiked upon. Pay
particular attention to plugs, wall outlets, and the poinf where the
cord exits the appliance.
Outdoor Use Marking :
WARNING - To Reduce The Risk Of Fire Or Electric Shock, Do Not Expose _ts Appliance To Rain Or Moisture.
Wet Location Marking :
Apparatus shall not be expased to dripping or splashing and no objects filled with liquids, such as vases, shah
be placed on the apparatus.
4 Plasma TV

Contents
Warnin!!Caution ................................ 2
Safety Instructions ............................. 3_-4
introductionControls ........................... 7
Connection Options ..................... 8
Remote Control Key Functions ............ 9_10
Installation
Accessories ............................. 11
InstaJtation hstructions .................. 11~12
Joining the "PC_lb_:/to the wall to protect _ set
t_b_r_ .............................. 11
External Equipment Connections ........... 13~18
Antenna or Cable Connection ........... 13~14
VCR Setup ........................... 14
Exlerna_ _JV Source Setup .............. 15
DVD Setup ......................... 15
HDSTB Setup ......................... 16
PC Setup ................................ 17
Monitor Out Setup .................. 18
Digital Audio Odtput ..................... 18
HDMI ............................... 19~21
Operation
Turning the TV On ........................ 22
On-screen Menus _nguage Selection .......... 22
Setup Menu Options
EZ Scan (Channel Search} ............... 23
Manual Scan ........................ 23
Channe_ Edit ........................... 24
DTV Signal Strength ..................... 24
Channel Lb_I Setup .................... 25
_nput Source .......................... 25
_nput Label .......................... 25
Video Menu Options
EZ Picture ............................ 26
Manual Picture Control (Custom Option} ...... 26
Color Temperature Control .............. 26
Video Reset ............................. 26
Audio Menu Options
Audio Language ........................ 27
EZ SoundRite /EZ Sound ................ 27
Manual Sound CentroI (Custom Option} ...... 27
Front Surround ......................... 28
TV Speakers On/Off Setup ................ 28
BBE .............................. 29
Stereo/SAP Broadcasts Setup .............. 29
_me Menu Options
Auto C_ock Setup ....................... 30
Manual C_ock Setup ................... 30
On/Off Timer Setup .................... 30
Sleep Timer /At_o Off .................... 31
Option Menu Features
Aspect Ratio Control ..................... 32
Cinerr_a 3:2 Mode Setup ................. 32
Caption ............................. 33
Caption /Text ............................. 33
Caption Option ........................ 34
ISM Method ........................... 34
Low Power ........................... 35
Lock Menu Options
Parentat Lock Setup ..................... 37
EPG (Electronic Program Guide} ............. 38
Brief Info ................................ 39
Mute ................................ 40
Freeze & Magnify ......................... 40
Screen Setup for PC mode .................. 41
APM(Adaptive Picture Mode} ................ 42
External Control Device Setup ................ 43~48
IR _es ................................ 49_50
Programming the Remote ...................... 51
Programming Codes ....................... 52~53
Troubleshooting Checklist ...................... 54
Maintenance ................................. 55
Product Specifications ......................... 56
Warranty ................................. 59~60
Setup and Operation Checklist
Setup and Operation Checklist
(see pages 13~21 for av_lable connection and operational setup options.)
1, Unpack TV and atl accessories 5, Turn video source equipment on,
2. Connect aH external video and audio equipment.
see pages 13-18. 6. Select viewing source for TV. See pages 25.
3 _nsta_l batteries in remote control
See pa_ 9
4, Turn TV on,
See page 22,
7, Fine-tune source image and sound to your personal prefer°
enca or as required by source
see pages 26~ 29.
8. Additiona_ features set up
See Contents above.
After reading this manual, keep it handy for future reference,
OwnePs Manual 5

Inlroductien
In uction
What is a Plasma Display Panel (PDP)?
A plasma display pane[ is the latest display techno_oigy and the best way to achieve flat pane[ displays with excellent image quaiity
and large screen sizes that are easily viewable The PDP can be thought of as a descendant of the neon lamp and it can be also
be viewed as a series of fluorescent lamps
How does it work?
PDP is an array of ce_ls, known as pixels_which are comprised of 3sub pixeis, corresponding to the colors red_green_and b_ue,
Gas in a plasma s_te is used to react with phosphors in each sub-pixel to produce colored light (red_green, or biue) These phos-
phors are the same types used in Cathode Ray Tube (CRT) devices such as televisions and common computer monitors,
You get the rich, dynamic coUors that you expect Each sub-pixel is individually controlled by advanced electronics to produce over
16 million different colors, All of these mean that you get perfect images that are easity viewab_e in a display that is less than 5
inches thick,
160 _ - Wide angle range of vision
Your fiat panel plasma screen offers an exceptionally broad viewing angle _ over 160 degrees. This means that the display is
clear and visible to viewers anywhere in the room who can see the screen.
Wide Screen
The screen of the Ptasma Dispray isso wide that your viewing experience is as ifyou are in a theater.
Multimedia
Connect your plasma display to a PC and you can use it for conferencing, games and lntemet browsing
Versat:i le
The tightweight and thin size makes it easy to install your ptasma display in a variety of _ocations _ere cenventionaJ TVs wilt not
fit,
The PDP Manufacturing Process: a few minute colored dots may be present on the PDP screen
The PDP (Plasma Display PaneJ), which is the display device of this product, is composed of 0.9 to 2.2 mitlion cells. A few cell
defers wi[I normally _cur in the PDP manufacturing process. _verai tiny, minute co_ored dots visible on the screen should be
acceptable. This a_so occurs in other PDP manufacturers' products. The tiny dots appearing does not mean that this PDP is defec-
_ve. Thus a few ceil defects are net sufficient cause for the PDP to be exchanged or returned. Our production technology mini°
mizes these cell defects dudng the manufacture and operation of this product.
6 Plasma TV

Introduc#on
-This is a simplified representation of froot panel.
Here shown may be somewhat different from your TV.
Front Panel Controls
Remote Control Sensor
CHANNEL (V, A) Buttons
VOLUME (_1_) Buttons
ENTER Button
MENU Button
TViVIDEO Button
POWER Button
Power Standby indicator
I_luminates red in standby m_e, [Huminates
green when the _ is turned on
Owner's Manual 7

lnlroduction
Back Connection Panel
S-VIDEO Input to provide bet-
ter picture quality than the video input
VIDEO Input
Connects the video signal from a
video device.
AUDIO Input
Use to connect to hear stereo _und
from an external device,
HDMI/DVI DVD/DTV Input Remote Control Port
connect a (Cempor_ 1-2) Connect your wired
DVt(Video), Connect a component remote control here,
signat to video/audio device to
H DMt/DVl these jacks,
RS-2320 INPUT
(CONTROL/SERVICE)
PORT
Connect to the RS-
232C port on a PC
I
S-Video Input
Connect S-Video out
from an S-VIDEO
device to the S-
WDEO input.
Antenna Input
Connect over4he_
air signals to this
Digital Audio (DVI: Digffal
Visual
IntertaceiComponent2)
Input/
Digital Audio Output
Connect digital audio from
various types of equipment
Note; In standby mode_
the_ ports w/l! not work_
RGB/AUDIO INPUT
Conned the monitor
output connector from
aPC to the appropri-
ate input port.
Audio/Video Input
Connec_ audio/video
output from an
external device to
these jacks.
Monitor Output
Connect a sec-
ond TV or
Monitor.
CABLE Input
Connect cable signals to this
iack_ either direct@ or through
a _ble box
Power Cord Socket
This TV operates on an AC power, The voltage
is indicated on the Specifications page Never
attempt to operate the TV on DC power,
8 Plasma TV

tntroduc#on
= When using the remote control, aim it at the remote control sensor on the TV.
TV INPI
•Rotates the input mode between Antenna
and Cable.
• Video, Front Video, Component 1-2, RGB o
DTV (or RGB-PC) and HDMI/DV_ input
sources_ screen returns to the last TV,
Selects the rerr_te operating mode: TV,
DVD, VCR, AUDIO, CABLE or STB. Select
a trade other than TV, for the remote to
operate an external device.
Brings up the main menu to the screen.
Clears aH on=screen displays and returns to
TV viewing from any rr_nu,
Lets you setect the an_,3unt of time before
you r TV turns itself
Switches the sou_ on or off (R_fer to p.42)
EZ
Selects a factory preset picture mode
depending on the viewing environment.
Extama[ input modes rotate in regular
sequence:: Antenna, Cabte, Video, Front
Video, Component 1-2, RGB DTV (or
RGB-PC) and HDMI/DVI input sources.
(Video, Front Video, Component 1=2 input
sources are linked automatically, only if
these are connected )
Changes the aspect ratio.
When you watch the TV, inforrr_tion dis-
plays on top of the screen. Not available
in Component 1-2, RGB and HDM[/DW
mode (Refer to p.41)
Scrolls the Favorite channels.
Tunes to the r_ent channels,
Freezes the currently-viewed pierre,
Main picture is frozen.
Installing Batteries
• Open the batte_ compartment cover on the back side and instal_ the batteries
matching correct polar_y (+ with +_ - with -)_
•Instali two 1.5V AA ba_ries, Don't mix old or used batteries w_h new ones. Close
cove r,
OwnePs Manual 9

Inlroductien
Turns your TV or any other programmed
equipment on or off, depending on rr_de,
Shows program schedule.
_UM_TICK i
Allows you to navigate the on-screen menus
and adiust the system settings to your pref-
e ten ce.
Select a closed caption:
Off, CC1 ~4, Te×tl ~4.
VOLUME
Increases/decreases the sound leve4
EZ SOUND
Selects the _und appropriate for the pro _
grams character_
Adjusts screen position, size, and phase in
PC _de.
BUTTONS
. Control some vid_ cassette recorders
or DVD players (RECORD" button is not
available for DVD p_ayers.)
DAY+!DAY-
Moves the Listings Grid forward or back-
ward in 24 hour increments.
CHANNEL UP/DOWN
Selects available channems found with EZ
scan.
PAGE UP/PAGE DOWN
Moves from one full set of screen infer =
marion to the next one_
bu_ons
SAP
_Jects MTS sound: MenD, Stereo, and
SAP in Analog mode Change the audio
_anguage in DTV m_e
APM(Adaptive Picture Mode)
Concurrently, compare with the
Daylight, Nor_l, Night _me,and
Custom on the screem
LIGHT
illuminates the remote contro_
buttons of selected mode
t0 Plasma TV