LG LP-XG2 User manual

LP-XG2
OWNER’S MANUAL
LG LCD PROJECTORLG LCD PROJECTOR
Please read this manual carefully before operating
your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached on the bottom of the set and
quote this information to your dealer when you
require service.
Model number :
Serial number :

LCD
PROJECTOR
LCD
PROJECTOR
1

CONTENTS
INDEX
INTRODUCTION
1Safety Instructions 3
Names of parts 7
INSTALLATION AND
CONNECTION
2Installation and Connection 11
Connecting to a Desktop PC 15
Connecting to a Notebook PC 16
Connecting to a Macintosh Desktop PC 17
Connecting to a Macintosh PowerBook 20
Connecting to a Video Source 21
Connecting to a D-TV Settop Box 22
BASIC FUNC-
TIONS
3Operating the Projector 23
Turning on the Projector 25
Function checking 26
Selecting source mode 27
Using Still function 28
SPECIAL
FUNCTIONS
4Selecting language 29
Checking lamp time 30
Using Flip Horizontal / Vertical function 31
Using Blank function 33
Selecting PC screen size input signal 35
POSITION-
ING
5
Using Tracking function 39
Adjusting Video 41
TRACKING/
VIDEO
6
Using Resize function 36
Adjusting screen display 37
INFORMATION
7Supported Monitor Display 42
Maintenance 43
Memo 44
Specifications 46
2
Before operating the
unit, please read this
manual carefully.

3
Safety Instructions
GAlways keep the safety instructions to prevent any potential accident or misuse of the projector.
✶The meanings of symbols in the manual and the unit are as below.
G Take care of danger that may happen under specific condition.
G Take care of electric shock that may happen under specific condition.
G After reading this manual, keep it in the place that the user always can contact easily.
GSafety Instructions have two kinds of information, and each meaning of it is as below.
WARNING The violation of this instruction may cause serious injuries and even death.
NOTES The violation of this instruction may cause light injuries or damage of the projector.
WARNING
PUSH
MENU
SOURCEBLANK
ENTER
VOL-VOL+
PUSH
MENU
SOURCEBLANK
ENTER
VOL-VOL+
PUSH
MENU
SOURCE BLANK
ENTER
VOL- VOL+
Do not attempt to repair or adjust this
equipment. Contact your dealer or Service
center. High risk of electric shock!
Don’t insert any object into the exhaust vent .
This may cause a fire or could give
an electric shock.
Don’t place the projector in direct sunlight
or near a heat source(radiator or heater).
This may cause a fire
or could give an
electric shock.
PUSH
MENU
SOURCE BLANK
ENTER
VOL- VOL+
Do not place anything containing liquid on
top of the projector. High risk of Electric
Shock or damage to the projector.
This may cause a fire
or could give an
electric shock.

INTRODUCTION
4
WARNING
PUSH
MENU
SOURCE BLANK
ENTER
VOL- VOL+
Don’t remove any covers (except lens
cover). High risk of Electric Shock!
PUSH
MENU
SOURCE BLANK
ENTER
VOL- VOL+
Use an air spray or soft cloth that is wet
with a neutral detergent and water for
removing dust or stains on the projection
lens.
PUSH
MENU
SOURCE BLANK
ENTER
VOL- VOL+
Only use the correct type of batteries for
the remote control. Dispose of used batter-
ies carefully.
This may cause a fire
or could give an
electric shock.
PUSH
MENU
SOURCEBLANK
ENTER
VOL-VOL+
Don’t look directly onto the lens when the
projector is in use. Eye damage may occur!
PUSH
MENU
SOURCEBLANK
ENTER
VOL-VOL+
Don’t use the projector in damp place such
as a bathroom or any place where it is like-
ly to get wet. Serious damage could occur
or risk of Electric Shock!
PUSH
MENU
SOURCEBLANK
ENTER
VOL- VOL+
Don’t use the projector if there is smoke
or unusual smell from the projector.
Disconnect from the mains and contact
the service center. Risk of fire!
Don’t look at laser beam directly as it may
cause eye damage.

5
Safety Instructions
NOTES
PUSH
MENU
SOURCEBLANK
ENTER
VOL- VOL+
Only use the projector on a level and sta-
ble surface.
It may fall down
or be upset.
PUSH
MENU
SOURCE BLANK
ENTER
VOL- VOL+
Don’t cover the project when in use.
It makes internal temperature increase
and causes a fire.
PUSH
MENU
SOURCEBLANK
ENTER
VOL-VOL+
No impact on the lens while moved. No contact while working, or right after the
lamp is off since the exhaust port and the
lamp lid generate heat.
PUSH
MENU
SOURCEBLANK
ENTER
VOL-VOL+
Disconnect from the mains and remove all
connections before moving.
Damage of cords may cause
a fire or electric shock.
Never touch the power plug with wet hand.
It may cause electric shock.
PUSH
MENU
SOURCEBLANK
ENTER
VOL- VOL+
Don’t use alcohol, benzene, or thinners to
clean any plastic parts of the projector.
Never use industrial chemicals or deter-
gents.
PUSH
MENU
SOURCEBLANK
ENTER
VOL- VOL+
Ensure the power lead doesn’t trail across
any hot objects like a heater.
It may make covering
parts melted
and cause a fire
or electric shock.

INTRODUCTION
6
NOTES
PUSH
MENU
SOURCE BLANK
ENTER
VOL- VOL+
Don’t touch the lens of the projector. It may
cause damage of it.
PUSH
MENU
SOURCE BLANK
ENTER
VOL- VOL+
Don’t use any sharp tools on the projector
as this will damage the casing.
PUSH
MENU
SOURCEBLANK
ENTER
VOL-VOL+
If the projector requires cleaning inside con-
tact the service centre. Accumulated dust
can cause mechanical failure.
PUSH
MENU
SOURCEBLANK
ENTER
VOL-VOL+
Place the projector where people will not
trip or tread on the power lead.
Use the indicated type of power source on
the projector. If you are not sure of the type
of power available, consult your dealer or
customer service center.
PUSH
MENU
SOURCEBLANK
ENTER
VOL- VOL+
Don’t place the projector or the remote
control on a heater or use in a heated car.
PUSH
MENU
SOURCEBLANK
ENTER
VOL-VOL+
Don’t use the projector when the power
cord or the plug is damaged or the con-
necting part of wall socket is loose.
It may cause electric shock
or a fire.
PUSH
MENU
SOURCE BLANK
ENTER
VOL- VOL+
Be sure to unplug when you don’t use
the projector for a long period or you are
absent.
Accumulated dust may
cause a fire,
electric shock from
deterioration,
or electric leakage.

7
Names of parts
POWER
MENU
SOURCE BLANK
ENTER
VOL- VOL+
Computer Out
AC
Computer In
Mouse
Computer
Audio
K
Audio Video S-VideoR L/MONO
Main Body
Main Body
Rear Connecting Part
Rear Connecting Part
Rear remote
control sensor
Handle
Foot adjusting
button
Indicators
Front remote
control sensor
Horizontal
leveler
Focus ring Lens cover Foot
Computer Audio
Computer Out
Computer In
Audio / Video
Main power button
Kensington Security
System Connector
(Refer to page 12)
Rear remote control sensor
Mouse
S-Video
Zoom ring
Power buttonSpeaker Control panel

INTRODUCTION
8
Control Panel
Control Panel
MENU
SOURCE
BLANK
ENTER
VOL
-
VOL +
POWER
POWER Button
D , EButton
Selects menus and
items in the menus.
MENU Button
Selects or closes
menus.
SOURCE Button
Switches to PC or
AV mode.
VOLUME Button
Adjusts volume level and
functions of menus.
ENTER Button
Checks present mode and
saves the change of functions.
BLANK Button

9
Names of parts
Remote Control
Remote Control
Inserting the batteries
Inserting the batteries
POWER Button
SOURCE Button
L MOUSE Button
(Zoom-out Button)
MOUSE DRAG Button
BLANK Button
RESIZE Button
AUTO TRACKING Button
Slide the battery cover
in the direction of the
arrow to remove.
VOLUME Button
MENU Button
R MOUSE Button
(Zoom-in Button)
ENTER Button
LASER Button
POINTER Button
STILL Button
MUTE Button
ZOOM Button
1
Insert the batteries with
correct polarity.
2
Replace the battery
compartment cover to
the arrow direction.
3