ASC/STANDARD/CINEMA : Selects sound effect.
DRC ON/OFF : Makes comfortable sound at Dolby Digital.
WOOFER LEVEL+/- : Adjusts the volume level of subwoofer.
AUTO POWER ON/OFF : Automatically turns on by an input
source.
Replacement of battery
Remote control
Additional Information
Front Panel
Rear Panel
·································· Standby/On
······························ Selects Function
··························Adjusts Volume
PORT.IN ·············· Connect to a Portable device
OPTICAL IN · · · · · · · · · · · Connect to an Optical device
Subwoofer Connection1
TV Connection2
TV
aConnect the sound bar to the TV using
Optical cable.
bSet up [External Speaker (Optical)] on
your TV setting menu.
Place the wireless subwoofer near the sound bar and
follow steps below.
aConnect the power cord of wireless
subwoofer to the outlet.
bTurn on the sound bar :
The sound bar and wireless subwoofer will be
automatically connected. The subwoofer's
yellow - green LED turns on.
Subwoofer Connection Manually
aReset the subwoofer
If the yellow - green LED on the subwoofer
blinks quickly, skip this step and go to b
yPress and hold PAIRING button for 5 seconds.
yThe LED lights up alternately in red and yellow
- green.
yPlug out the power cord. After the LED turns
off completely, plug in the power cord again.
When the reset is completed, the subwoofer's
yellow - green LED blinks quickly.
bReset the sound bar
yAdjust volume to minimum until the red LED
on the sound bar lights up for a while.
yPress and hold (Mute) button on the remote
control for 3 seconds.
yThe red LED on the sound bar blinks quickly.
yTurn the sound bar’s power off and on while
the subwoofer’s yellow - green LED blinks.
When the connection is completed, you can see the
yellow - green LED on the subwoofer.
Keep the sound bar and the subwoofer away
from the device (ex. wireless router, microwave
oven, etc.) over 1m to prevent wireless
interference.
!P
Addtional Device Connection
aConnect to the external device as follows.
TV
(Set-top
Box, Player
etc.)
bSet the input source by pressing Fon the
remote control or unit repeatedly.
Specication
Power requirements Refer to the main label.
Power
consumption
Refer to the main label.
Networked standby : 0.5 W
(If all network ports are
activated.)
Dimensions
(W x H x D)
Approx.
950 mm x 71 mm x 47 mm
Net Weight Approx. 2.47 kg
Amplier
(Total RMS
Output power)
300 W
Design and specications are subject to change without
notice.
How to disconnect the wireless network
connection or the wireless device
Set up the AUTO POWER ON/OFF function to off and
turn off the unit.
SH3B.DSGPLLK_SIM_ENG_4915(����).indd 3-4 2016-06-29 �� 5:01:07
