LG SJ3 Specification sheet

SIMPLE MANUAL
Wireless
Sound Bar
Please read this manual carefully before operating your set
and retain it for future reference.
To view the instructions of advanced features,
visit http://www.lg.com and then download Owner's Manual.
Some of the content in this manual may differ from your unit.
SJ3
Copyright © 2022 LG Electronics Inc. All Rights Reserved.
www.lg.com
MODEL
SLOVENŠČINA SHQIP
BOSANSKI
SVENSKA
DANSK NORSK SUOMI
MAGYAR
SRPSKIHRVATSKILATVIEŠUROMÂNĂPOLSKI
SLOVENČINA
ČESKY
ENGLISH
PORTUGUÊS
ΕΛΛΗΝΙΚΑ
ESPAÑOLITALIANO
NEDERLANDS
FRANÇAISDEUTSCH
БЪЛГАРСКИ
МАКЕДОНСКИ
2203_Rev01
MFL69729827
SJ3.DEUSLLM_SIM_ENG_MFL69729827.indd 1 2022-03-11  1:30:24

Front Panel
Rear Panel
·································· Standby/ON
······························ Selects Function
/ ·························· Adjusts Volume
PORT.IN ·············· Connect to a Portable device
OPTICAL IN · · · · · · · · · · · Connect to an Optical device
USB ················· Connect to a USB device
If the optical cable is not connected in the
correct direction, it may cause damage of
optical jack.
Subwoofer Connection1
Place the wireless subwoofer near the sound bar and
follow steps below.
aConnect the power cord of wireless subwoofer
and sound bar to the outlet.
bTurn on the main unit. :
The sound bar and wireless subwoofer will be
automatically connected. The subwoofer's
green LED turns on.
Subwoofer Connection Manually
aPress Pairing button on the rear of the wireless
subwoofer.
yThe green LED on the rear of wireless
subwoofer blinks quickly.
bTurn on the main unit.
cPairing is completed.
yThe green LED on the rear of wireless
subwoofer turns on.
Keep the sound bar and the subwoofer away
from the device (ex. wireless router, microwave
oven, etc.) over 1m to prevent wireless
interference.
!P
SJ3.DEUSLLM_SIM_ENG_MFL69729827.indd 2 2022-03-11  1:30:25

ASC/STANDARD/CINEMA: Selects the sound effect.
NIGHT ON/OFF: Turns down the volume at night.
WOOFER LEVEL +/-: Adjusts the volume level of
subwoofer.
AUTO POWER ON/OFF: Automatically turns on by an
input source.
Replacement of battery
Remote control
TV Connection2
aConnect the sound bar to the TV using
Optical cable.
bSet up [External Speaker (Optical)] on
your TV setting menu.
TV
Additional Device Connection
aConnect to the external device as follows.
TV
(Set-top Box,
Player etc.)
bSet the input source by pressing Fon the
remote control or unit repeatedly.
Additional Information
Specication
Power requirements Refer to the main label.
Power
consumption
Refer to the main label.
Networked standby : 0.5 W
(If all network ports are
activated.)
Dimensions
(W x H x D)
Approx.
950 mm x 71 mm x 47 mm
Bus Power Supply
(USB) 5 V 0500 mA
Amplier
(Total RMS
Output power)
300 W RMS
Design and specications are subject to change without
notice.
How to disconnect the wireless network
connection or the wireless device
Set up the AUTO POWER ON/OFF function to off and
turn off the unit.
Declaration of Conformity
Hereby, LG Electronics declares that the radio equipment
type Wireless Sound Bar is in compliance with Directive
2014/53/EU. The full text of the EU declaration of
conformity is available at the following internet address:
http://www.lg.com/global/support/cedoc/cedoc#
For consideration of the user, this device should be
installed and operated with a minimum distance of 20
cm between the device and the body.
Frequency range Output power (Max.)
2402 to 2480 MHz 10 dBm
5730 to 5850 MHz 13.35 dBm
SJ3.DEUSLLM_SIM_ENG_MFL69729827.indd 3 2022-03-11  1:30:26

SJ3.DEUSLLM_SIM_ENG_MFL69729827.indd 4 2022-03-11  1:30:26