LG SQC1 Specification sheet
www.lg.com
Copyright © 2022 LG Electronics Inc. All Rights Reserved.
SQC1
SIMPLE MANUAL
WIRELESS
SOUND BAR
2207_Rev01
MFL71933324
ENGLISH
Specication
Power consumption
yRefer to the main label.
AC adapter
yModel : A931-230087W-M21
yManufacturer : Dongguan Aohai Technology Co.,Ltd.
yInput : 100 - 240 V ~ 50/60 Hz
yOutput : 23.0 V 00.87 A
Dimensions (W x H x D): Approx. 660.0 mm x 56.0 mm x 99.0 mm
Bus Power Supply (USB): 5 V 0500 mA
Amplier (Total RMS Output power): 160 W RMS
SQC1.DPHLLLK_SIMPLE (Sheet)_MFL71933324.indd 1-2 2022-11-16 4:37:30
ENGLISH
Installing and Using the Product
Please read this manual carefully before operating your set and retain it for future reference.
To view the instructions of advanced features, visit http://www.lg.com or scan QR code and then download
Owner’s Manual. Some of the content in this manual may differ from your product.
ASound bar
BFunction LED / Remote Control Receiver
CWireless Subwoofer - Install it close to the sound bar.
DExternal Device - (Blu-ray player, game console, etc.)
aConnectthesoundbartoyourTVviaanopticalcable.
b If you are using an external device (ex. Blu-ray player, game console, etc.), connect it to the TV via an HDMI cable.
c Connect to power in the following order: wireless subwoofer [sound bar. Then, turn on the sound bar. When the connection is
automatically established with the sound bar, the LED on the wireless subwoofer will light up green.
d UsingtheproductwithyourTV
A Press the Fbutton repeatedly or OPTICAL button once until the OPTICAL LED appears on the function LED.
BOn your TV’s settings, set the output speaker to [Optical] or [External Speaker].
eConnectingtheproducttoyoursmartphoneviaBluetooth
ATap the Settings button on your smartphone and select Bluetooth. Turn on the Bluetooth function. ( Off >
On)
BPress the Fbutton repeatedly until the blinking Bluetooth LED appears on the function LED.
CFind and tap the product on your smartphone. The product appears as “LG SQC1 (XX)”.
DWhen the product is connected to your smartphone via Bluetooth, the Bluetooth LED turns on.
IfyouseearedLEDonthebackofthewirelesssubwoofer,itmeansthatthesoundbarisnotconnectedtothesubwoofer.Ifthisisthe
case,connecttheminthefollowingorder.
APress the Power button on the sound bar to turn it off.
BPress the Pairing button on the back of the disconnected wireless subwoofer. Check if LED blinks green.
-If you still see a red LED on the back of the wireless subwoofer, press and hold the button on the back of the subwoofer again.
CPress the Power button on the sound bar to turn it on.
DWhen the connection is established, you will see a green LED light on the back of the wireless subwoofer.
Keep the sound bar, the subwoofer away from the device (ex. wireless router, microwave oven, etc.) over 1 m to prevent wireless interference.
yDesign and specications are subject to change without notice.
HDMI OUT
OPT.IN
D
B
A
a
b
C
OPTICAL
OUT
HDMI IN
PORT.IN
Replacement of Battery
SQC1.DPHLLLK_SIMPLE (Sheet)_MFL71933324.indd 3-4 2022-11-16 4:37:33
Other manuals for SQC1
7
Table of contents
Other LG Speakers System manuals
