LG 26LC2R Series User manual

PPlleeaassee rreeaadd IInnffoorrmmaattiioonn MMaannuuaalliinncclluuddeedd ttooggeetthheerr
bbeeffoorree rreeaaddiinngg tthhiiss mmaannuuaall aanndd ooppeerraattiinngg yyoouurr sseett..
Retain it for future reference.
Record model number and serial number of the set.
See the label attached on the back cover and quote
this information to your dealer when you require service.
LCD TV PLASMA TV
OWNER’S MANUAL
LCD TV MODELS
26LC2R*
27LC2R*
32LC2R*
32LC25R*
26LC3R*
32LC3R*
32LX2R*
32LE2R*
37LE2R*
42LE2R*
PLASMA TV MODELS
42PC1RV*
42PC3RV*
42PC3RA*
ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL PORTUGUÊS NEDERLANDS ∂ÏÏËÓÈÎ
¿
SAC30033601_cover-en_rev04 9/27/06 10:24 AM Page 1

1
ACCESSORIES
ACCESSORIES
Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the
dealer where you purchased the product.
Owner's
Manual
Owner’s Manual Batteries
OK
INPUT
TV
TV
PIP PR- PIP PR+
PIPINPUT
DVD
ARC
EXIT
VOL
TIME
REVEAL
INDEX
Q.VIEW
PR
SLEEP
LIST
I/II
MENU
PIP SIZE
POSTION
VCR
POWER
123
456
789
*
FAV
?
0
TEXT
INPUT
MUTE
Remote Control Power Cord
2-Wall brackets 2-eye-bolts
2-T brackets
2-Wall brackets
2-bolts
oorr 2266LLCC22RR**,, 2277LLCC22RR**,, 3322LLCC22RR**,, 3322LLCC2255RR**,, 2266LLCC33RR**,, 3322LLCC33RR**,, 3322LLXX22RR**,, 3322LLEE22RR**,,
3377LLEE22RR**,, 4422LLEE22RR**
oorr 4422PPCC11RRVV**,, 4422PPCC33RRVV**,, 4422PPCC33RRAA**
4-bolts for stand assembly
Twister Holder
Arrange the wires
with the twister holder.
2-bolts for stand assembly
Refer to p.12
This feature is not available for all
models.
Cable
Management
2266LLCC22RR**,, 2277LLCC22RR**,, 3322LLCC22RR**,,
3322LLCC2255RR**,, 3322LLEE22RR**,, 3377LLEE22RR**,,
4422LLEE22RR**
Cable
Management
2266LLCC33RR**,, 3322LLCC33RR**
3322LLCC22RR**,,
3322LLCC2255RR**oonnllyy

2
CONTENTS
CONTENTS
ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
INTRODUCTION
Controls / Connection Options . . . . . . . . . . . . . . . . . . . . . . . . . .4-9
Remote Control Key Functions . . . . . . . . . . . . . . . . . . . . . . . . .11 - 12
Installing Batteries . . . . . . . . . . . . . . . . . . . . . . . . . .12
T MENU
On Screen enus Selection and Adjustment . . . . .36
SSeettttiinngg uupp TTVV ssttaattiioonnss
Auto programme tuning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
anual programme tuning . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
Fine tuning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Assigning a station name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Programme edit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
Favourite programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Calling the programme table
. . . . . . . . . . . . . . . . . . . . . . . . . 43
PPiiccttuurree eennuu OOppttiioonnss
PS (Picture Status emory) . . . . . . . . . . . . . . . . . . . . . .44
Picture Adjustment (PS -User option) . . . . . . . . .45
CS (Colour Status emory) . . . . . . . . . . . . . . . . . . . . . .46
anual Colour Temperature Control
(CS - User option) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47
Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48
ADVANCED-CINE A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
ADVANCED-BLACK LEVEL . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
SSoouunndd eennuu OOppttiioonnss
SS (Sound Status emory) . . . . . . . . . . . . . . . . . . . . . . .52
Sound Frequency Adjustment
(SS - User option) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
AVL (Auto Volume Leveler) . . . . . . . . . . . . . . . . . . . . . . . . . . .54
Balance Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
Speaker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Stereo/Dual Reception . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
NICA Reception . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58
Speaker Sound Output Selection . . . . . . . . . . . . . . . . . .58
TTiimmee eennuu OOppttiioonnss
Clock Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59
On/Off Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60
Auto Sleep . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61
Sleep Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61
SSppeecciiaall eennuu OOppttiioonnss
Child Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62
IS (Image Sticking inimization) ethod . . .63
Low Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64
XD Demo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65
INSTALLATION
Stand Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13 - 14
Basic Connection /
How to Remove the Cable anagement . . . . . . . . . . .15 - 17
How to join the product assembly to the wall
to protect the set tumbling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
CONNECTIONS & SETUP
Antenna Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
VCR Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21 - 22
External Equipment Connections . . . . . . . . . . . . . . . . . . . . . . . . . .23
DVD Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24-25
HDSTB Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26-27
PC Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28-29
Turning the TV On . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30-31
SPECIAL FUNCTIONS
PPIIPP ((PPiiccttuurree--IInn--PPiiccttuurree))
Watching PIP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Programme Selection for Sub Picture . . . . . . . . . . . .32
Input Source Selection for Sub Picture . . . . . . . . . .32
Sub Picture Size Adjustment (PIP mode only) . .32
oving the Sub Picture (PIP mode only) . . .32
TTeelleetteexxtt
Teletext Language Selection . . . . . . . . . . . . . .33
Switch on/off . . . . . . . . . . . . . . . . . . . . . . . . .33
SI PLE Text . . . . . . . . . . . . . . . . . . . . . . . . . .33
TOP Text . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
FASTEXT . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Special Teletext Functions . . . . . . . . . . . . . . .35

3
CONTENTS
T MENU
SSccrreeeenn eennuu OOppttiioonnss
Auto Configure (RGB [PC] mode only) . . . . . . . . . . . .66
anual Configure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67
Setting the Picture Format . . . . . . . . . . . . . . . . . . . . . .68-69
Selecting Wide VGA/XGA mode . . . . . . . . . . . . . . . . . . .69
Initializing
(Reset to original factory settings) . . . . . . . . . . . . . . . .70
APPENDIX
Programming the Remote . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Programming code
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
71-72
Troubleshooting Checklist
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 73-74
aintenance
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Product Specifications
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76-77

4
CONTROLS
INTRODUCTION
INTRODUCTION
This is the front panel of models 42PC1RV*TVs.
■
This is a simplified representation of the front panel. Here shown may be somewhat different from your TV.
Front Panel Controls
PR
VOL
OK
MENU
INPUT
PROGRAMME Buttons
VOLUME Buttons
MENU Button
OK Button
INPUT Button
POWER Button
PR
VOLOL
OK
MENUMENU
INPUT
Power/Standby Indicator
• illuminates red in standby mode.
• illuminates white when the set is
switched on.
PR
VOL
OK
MENU
INPUT

5
INTRODUCTION
This is the front panel of models 42PC3RV*, 42PC3RA*TVs.
■
This is a simplified representation of the front panel. Here shown may be somewhat different from your TV.
Front Panel Controls
PR
VOL
OK
MENU
INPUT
Remote Control Sensor
Power/Standby Indicator
• illuminates red in standby mode.
• illuminates white when the set is switched on.
PROGRAMME Buttons
VOLUME Buttons
OK Button
MENU Button
INPUT Button
ON/O Button

6
CONNECTION OPTION
INTRODUCTION
INTRODUCTION
This is the back panel of models 42PC1RV*, 42PC3RV*, 42PC3RA*TVs.
Back Connection Panel
42PC1RV*only
REMOTE
CONTROL IN
AUDIO IN
(RGB)
AC IN
AV 1V 1 AV 2
MONO
()
AUDIOUDIO
RGB IN
(PC/DTV)
RS-232C INRS-232C IN
(CONTROL & SERVICE)
HDMI IN
ANTENNA
IN
VIDEOVIDEO
S-VIDEOS-VIDEO
AV IN 3
AUDIO OUT
VARIABLE
VIDEOVIDEO
AUDIOUDIO
COMPONENT INCOMPONENT IN
AV IN 4
L/MONO
R
AUDIOAUDIO
VIDEOVIDEO
AUDIO Input
Connections are available for listening
stereo sound from an external device.
VIDEO Input
Connects the video signal from a video
device.
78
21 4
3
9
5
10 11
6
Euro Scart Socket (AV1/AV2)
Connect scart socket input or output from an
external device to these jacks.
Component Input
Connect a component video/audio device to
these jacks.
Remote Control Port
Connect your wired remote control here.
RGB/Audio Input
Connect the monitor output from a PC to the
appropriate input port.
HDMI Input
Connect a HD I signal to HD I port with HD I
cable.
Power Cord Socket
This TV operates on an AC power. The voltage is
indicated on the Specifications page. Never
attempt to operate the TV on DC power.
S-Video Input
Connect S-Video out from an S-VIDEO device.
Audio/Video Input
Connect audio/video output from an external
device to these jacks.
RS-232C Input (CONTROL&SERVICE) Port
Connect the serial port of the control devices to
the RS-232C jack.
Variable Audio Output
Connect an external amplifier or add a subwoofer
to your surround sound system.
Antenna Input
Connect over-the-air signals to this jack.
1
2
3
4
5
6
7
8
9
10
11

7
INTRODUCTION
This is the front panel of models 26LC2R*, 26LC3R*, 27LC2R*, 32LC2R*, 32LC25R*, 32LC3R*, 32L 2R*,
37L 2R*, 42L 2R*TVs.
■
This is a simplified representation of the front panel. Here shown may be somewhat different from your TV.
Front Panel Controls
R
Remote Control Sensor
Power/Standby Indicator
• illuminates red in standby mode.
• illuminates white when the set is switched on.
26LC2R*, 27LC2R*, 32LC2R*, 32LC25R*, 32L 2R*,
37L 2R*, 42L 2R*
R
Remote Control Sensor
Power/Standby Indicator
• illuminates red in standby mode.
• illuminates white when the set is switched on.
26LC3R*, 32LC3R*
PR
VOL
OK
MENU
INPUT
/I
PROGRAMM Buttons
VOLUM Buttons
OK Button
M NU Button
INPUT Button
ON/OFF Button

8
CONTROLS
INTRODUCTION
INTRODUCTION
This is the front panel of models 32LX2R*TV.
■
This is a simplified representation of the front panel. Here shown may be somewhat different from your TV.
Front Panel Controls
PR VOL MENU
OK INPUT ON/OFF
PR VOL MENU
OK INPUT ON/OFF
PROGRAMME Buttons
VOLUME Buttons MENU Button
OK Button
INPUT Button
POWER Button
Remote Control Sensor
Power/Standby Indicator
• illuminates red in standby mode.
• illuminates white when the set is switched on.

9
CONTROLS
INTRODUCTION
REMOTE
CONTROL IN
AUDIO IN
(RGB)
AC IN
AV 1V 1 AV 2V 2
MONO
()
AUDIOUDIO
RGB IN
(PC/DTV)
RS-232C INRS-232C IN
(CONTROL & SERVICE)
HDM IN
ANTENNA
IN
VIDEOVIDEO
S-VIDEOS-VIDEO
AV IN 3
AUDIO OUT
VARIABLE
VIDEOVIDEO
AUDIOUDIO
COMPONENT INCOMPONENT IN
AV IN 4
AUDIOAUDIOVIDEOVIDEO
L/MONO
R
AC IN
AV IN 4
AUDIOAUDIOVIDEOVIDEO
L/MONO
R
This is the back panel of models 26LC2R*, 26LC R*, 27LC2R*TVs.
Back Connection Panel
AUDIO Input
Connections are available for listening
stereo sound from an external device.
VIDEO Input
Connects the video signal from a video
device.
Power Cord Socket
This TV operates on an AC power. The voltage is
indicated on the Specifications page. Never
attempt to operate the TV on DC power.
Euro Scart Socket (AV1/AV2)
Connect scart socket input or output from an
external device to these acks.
Component Input
Connect a component video/audio device to
these acks.
Remote Control Port
Connect your wired remote control here.
RGB/Audio Input
Connect the monitor output from a PC to the
appropriate input port.
HDMI Input
Connect a HDMI signal to HDMI port with HDMI
cable.
S-Video Input
Connect S-Video out from an S-VIDEO device.
Audio/Video Input
Connect audio/video output from an external
device to these acks.
RS-2 2C Input (CONTROL&SERVICE) Port
Connect the serial port of the control devices to
the RS-232C ack.
Variable Audio Output
Connect an external amplifier or add a subwoofer
to your surround sound system.
Antenna Input
Connect over-the-air signals to this ack.
1
2
4
5
6
7
8
9
10
11
78
1 2 5
4
9
6
10 11
26LC R*
26LC2R*
27LC2R*

10
INTRODUCTION
INTRODUCTION
REMOTE
CONTROL IN
AUDIO IN
(RGB)
AC IN
AV 1V 1 AV 2
MONO
()
AUDIOUDIO
RGB IN
(PC/DTV)
RS-232C INRS-232C IN
(CONTROL & SERVICE)
HDM IN
ANTENNA
IN
VIDEOVIDEO
S-VIDEOS-VIDEO
AV IN 3
AUDIO OUT
VARIABLE
VIDEOVIDEO
AUDIOUDIO
COMPONENT INCOMPONENT IN
AC IN
AV IN 4
L/MONO
R
AUDIOAUDIO
VIDEOVIDEO
AV IN 4
L/MONOMONO
R
AUDIOAUDIO
VIDEOVIDEO
AV IN 4
AUDIOAUDIOVIDEOVIDEO
L/MONO
R
This is the back panel of models 32LC2R*, 32LC25R*, 32LC3R*, 32L 2R*, 32LE2R*, 37LE2R*, 42LE2R*TVs.
Back Connection Panel
AUDIO Input
Connections are available for listening
stereo sound from an external device.
VIDEO Input
Connects the video signal from the video
device.
Power Cord Socket
This TV operates on an AC power. The voltage is
indicated on the Specifications page. Never
attempt to operate the TV on DC power.
Euro Scart Socket (AV1/AV2)
Connect scart socket input or output from an
external device to these acks.
Component Input
Connect a component video/audio device to
these acks.
Remote Control Port
Connect your wired remote control here.
RGB/Audio Input
Connect the monitor output from a PC to the
appropriate input port.
HDMI Input
Connect a HDMI signal to HDMI port with HDMI
cable.
S-Video Input
Connect S-Video out from an S-VIDEO device.
Audio/Video Input
Connect audio/video output from an external
device to these acks.
RS-232C Input (CONTROL&SERVICE) Port
Connect the serial port of the control devices to
the RS-232C ack.
Variable Audio Output
Connect an external amplifier or add a subwoofer
to your surround sound system.
Antenna Input
Connect over-the-air signals to this ack.
1
2
3
4
7
5
6
8
9
10
11
78
31 2 5
4
9
6
10 11
32LC3R*
37LE2R*
42LE2R*
CONTROLS
32LC2R*
32LC25R*
32L 2R*
32LE2R*

11
INTRODUCTION
REMOTE CONTROL KEY UNCTIONS
When using the remote control, aim it at the remote control sensor on the TV.
OK
INPUT
TVTV
PIP PR- PIP PR+ PIP INPUT
DVD
ARC
EXIT
VOL
TIME
REVEAL INDEX
Q.VIEW
PR
SLEEP
LIST I/II
MENU
PIP SIZE
POSTION
VCR
POWER
123
456
789
*0
FAV
?
TEXT
INPUT
MUTE
POWER
TV INPUT
INPUT
Switches the set on from standby or off to standby.
Returns to the TV viewing from any mode.
Switches the set on from standby.
If you press the button once, the input source OSD
will appear on screen as shown. Press the DD/ EEbut-
ton and then OK button to select the desired input
source (TV, AV1 , AV2, S-Video2 , AV3 , AV4 (except
42PC3RV*, 42PC3RA*), Component , RGB, or HD I).
ARC
Brightness
adjustment
Selects your desired picture format.
Adjusts screen brightness.
It returns to the default settings brightness by changing
mode source.
PIP
SIZE
POSITION
PIP PR - /+
PIP INPUT
Coloured
buttons
Switches the sub picture PIP, DW mode.
Adjusts the sub picture size.
oves the sub picture.
Selects a programme for the sub picture.
Selects the input source for the sub picture in PIP/Twin
picture mode.
These buttons are used for teletext (only TTEELLEETTEEXXTT
models) or PPrrooggrraammmmee eeddiitt.
CR/D D
control buttons
Controls some video cassette recorders or DVD players
when you have already selected DVD or VCR mode button.
EXIT
LIST
MENU
I/II
SLEEP
Clears all on-screen displays and returns to TV viewing
from any menu.
Displays the programme table.
Selects a menu.
Selects the sound output.
Sets the sleep timer.

12
INTRODUCTION
INTRODUCTION
OK
INPUT
TVTV
PIP PR- PIP PR+ PIP INPUT
DVD
ARC
EXIT
VOL
TIME
REVEAL INDEX
Q.VIEW
PR
SLEEP
LIST I/II
MENU
TEXT PIP SIZE
POSTION
VCR
POWER
123
456
789
*
FAV
?
0
INPUT
MUTE
1
1
1
■
Open the battery compartment cover on the back side and install
the batteries matching correct polarity (+ with +, - with -).
■
Install two 1.5 AA batteries. Don’t mix old or used batteries with
new ones.
■
Close cover.
INSTALLING BATTERIES
MODE Selects the remote operating modes.
TELETEXT
BUTTONS These buttons are used for teletext.
For further details, see the ‘Teletext’ section.
THUMBSTICK
(Up/Down/Left
Right)
OK
Allows you to navigate the on-screen menus and adjust
the system settings to your preference.
Accepts your selection or displays the current mode.
VOLUME U
/DOWN
Q.VIEW
MUTE
rogramme
U /DOWN
0~9 number
button
FAV
*
Adjusts the volume.
Returns to the previously viewed programme.
Switches the sound on or off.
Selects a programme.
Selects a programme.
Selects numbered items in a menu.
Displays the selected favourite programme.
No function
SAC30033601_en_1-rev02 8/25/06 9:48 PM Page 12

INSTALLATION
13
STAND INSTALLATION
INSTALLATION
Figures shown here may be slightly different from your set.
WWhheenn cclloossiinngg tthhee ssttaanndd ffoorr ssttoorraaggee
First remove the screws in the holes (B)on the bottom of the
stand.And then pull two Hooks (D)of the stand bottom and
fold the stand into the back of the set.
After folding,push two Locks (A)of the stand bottom outward.
NOTE
!
■Place the set with the screen facing down on a cushion or soft cloth as shown in Figures 1.
Before unfolding the stand,please make sure two locks (A)on the bottom of the stand push outward.
■Pull the stand out as shown above in Figures 2 ~3.
After unfolding the stand,please insert and tighten the screws in the holes (B)on the bottom of the stand.
■When connecting cables to the set,Do not disengage the lock (C).
This may cause the set to fall,causing serious bodily injury and serious damage to the set.
A
C
B
12
34
■This feature is not available for all models.
A
D
B

14
STAND INSTALLATION (Only 32LC2R*, 32LC25R*)
INSTALLATION
INSTALLATION
1
2
3
Carefully place the product screen side down on
a cushioned surface that will protect product
and screen from damage.
Place the product stand on the product as
shown.
Install the 4 bolts securely, in the back of the
product in the holes provided.
SAC30033601_en_1-rev02 8/28/06 4:00 PM Page 14

INSTALLATION
15
BASIC CONNECTION (42PC1RV*, 42PC3RV*, 42PC3RA*)
Arrange the cables as shown picture.
Hold the CCAABBLLEE MMAANNAAGGEEMMEENNTT with both
hands and push it as shown.
Connect the cables as necessary.
To connect an additional equip ent, see the
EExxtteerrnnaall eeqquuiippeennttCCoonnnneeccttiioonnss section.
Reinstall the CCAABBLLEE MMAANNAAGGEEMMEENNTTas
shown.
1
2
3
CABLE MANAGEMENT
■These models have two cable arrangement methods according to the stand ty e.
Stand ty e 1
Stand ty e 2
SAC30033601_en_1-rev02 8/28/06 4:01 PM Page 15

16
BASIC CONNECTION
(Only 26LC2R*, 27LC2R*, 32LC2R*, 32LC25R*, 26LC3R*, 32LC3R*, 32LE2R*, 37LE2R*, 42LE2R*)
INSTALLATION
INSTALLATION
Connect the cables as necessary.
After connecting the cables neatly, arrange
the cables to the Cable Holder.
To connect an additional equipment, see the
EExxtteerrnnaall eeqquuiippmmeennttCCoonnnneeccttiioonnss sec-
tion.
1
Install the CCAALLEE MMAANNAAGGEEMMEENNTT
as shown.
2
undle the cables using the supplied
twister holder.
3
NOTE
!
GG Do not hold the CABLE MANAGEMENT when moving the product.
- If the product i dropped, you may be injured or the product may be broken.
HOW TO REMOVE THE CABLE MANAGEMENT
CABLE MANAGEMENT
- Hold the CCAALLEE MMAANNAAGGEEMMEENNTTwith both hands and pull it upward.
- Hold the CCAALLEE MMAANNAAGGEEMMEENNTTwith both hands and pull it downward. (Only 32LC3R*)

INSTALLATION
17
BASIC CONNECTION (32LX2R*)
Hold the cover with both hands and pull
it backward.
1
Connect the cables as necessary.
To connect an additional equipment, see
the EExxtteerrnnaall eeqquuiippmmeennttCCoonnnneeccttiioonnss
section.
2
Bundle the cables using the supplied
twister holder.
3
Antenna
The TV can be conveniently swiveled on its stand 30°
to the left or right to provide the optimum viewing
angle.
SWIVEL STAND (32LX2R*)

18
INSTALLATION
INSTALLATION
Desktop Pedestal Installation
4 inches
4 inches4 inches
4 inches
For proper ventilation, allow a clearance of 4" on each side and from the wall.
Wall Mount: Horizontal installation
4 inches
4 inches
4 inches
4 inches
4 inches
For proper ventilation, allow a clearance of 4" on each side and from the wall. Detailed installation instruc-
tions are available from your dealer, see the optional Tilt Wall ounting Bracket Installation and Setup Guide.
GROUNDING
Ensure that you connect the earth ground wire to prevent
possible electric shock. If grounding methods are not pos-
sible, have a qualified electrician install a separate circuit
breaker. Do not try to ground the unit by connecting it to
telephone wires, lightening rods, or gas pipes.
Power
Supply
Short-circuit
Breaker
■The TV can be installed in various ways such as on a wall, or on a desktop etc.
■The TV is designed to be mounted horizontally.
<<OOnnllyy 4422PPCC11RRVV
*
,, 4422PPCC33RRVV
*
,, 4422PPCC33RRAA
*
sseerriieess>>
Remove two screws of the backside of the set before
installing the wall mounting bracket.