LG V-C9352WA User manual

VACUUM CLEANER
SERVICE MANUAL
CAUTION
BEFORE SERVICING THE UNIT, READ THE
"SAFETY PRECAUTIONS" IN THIS MANUAL.
MODEL : V-C9352WA
V-C9363WA
V-C9364WAU
V-WA266ND

CONTENTS
-2-
SAFETY PRECAUTIONS. ...................................................................................3
CAUTIONS...........................................................................................................3
DESCRIPTION ....................................................................................................4
SPECIFICATIONS ...............................................................................................5
DISASSEMBLY................................................................................................5~8
TROUBLESHOOTING...................................................................................9~11
BLOCK DIAGRAM.............................................................................................12
SCHEMATIC DIAGRAM.....................................................................................12
EXPLODED VIEW .....................................................................................13~16
REPLACEMENT PARTS LIST ....................................................................17~18
APPENDIX.........................................................................................................19

SAFETY PRECAUTIONS
CAUTIONS
-3-
BEFORE OPERATING THIS VACUUM CLEANER, READ THIS SERVICE MANUAL THOROUGHLY, AND
OBSERVE EACH POINT CAREFULLY.
BEFORE ATTEMPTING TO SERVICE OR ADJUST ANY PART OF THE VACUUM CLEANER, DISCONNECT
THE ELECTRICAL POWER SUPPLY CORD FROM THE WALL OUTLET.
1. Motor exchange
1) Separate the Body Cover and Body Base by
unfastening the screws.
2) Disconnect lead wires.
3) Remove the old motor and replace it with a new
one.
2. In case of exchanging other parts, refer
to the exploded view.
1. Empty the dust tank, when the dust thank is full.
1) If the dust thank is full, intake power will be
reduced.
2. Filter
1) The filter is composed of Air filter and Exhaust
filter.
2) Never use the vacuum cleaner without filters.
It may harm to the motor and cleaner does not
work properly.
3) After cleaning, separate the Air filter and clean it
using water and brush.
NOTE: Reuse of Air filter
• Never wash the filter in a washing machine or in a
dishwasher.
• Never use hot water for washing the filter.
• Reuse the filter after drying it completely in the
shade for a day.
• Do not dry near fire or direct sun ray.
3. Avoid suction such materials as:
1) Inflammable liquids such as benzene, alcohol or
solvents.
2) Burning objects such as cigarette butts or hot
ash.
3) Bulky objects such as vinyl, paper etc.
4) Sharp and hard objects as pins, needles, stones,
small toys etc.
4. Attachments
• Main spray nozzle: Shampoo cleaning for carpet
and floor.
• Window master: Shampoo cleaning for window.
• Small shampoo nozzle: Shampoo cleaning for
sofa and chair etc.
• Carpet/Floor nozzle: For cleaning wooden floor,
the room floor and carpet.
• Carpet master: For carpet cleaning
• Crevice tool: For cleaning any crevice, inside
corners window frames. (However,
do not use the crevice tool more than
20 minutes.)
• Dusting brush: For delicate vacuuming of fabrics
on the furniture, curtains, etc.
• Upholstery Nozzle: For vacuuming the dust on the
upholstery.
5. Close supervision is necessary when this
vacuum cleaner is used by or near children.
Children's cardlessness may cause damage to
the cleaner or injure persons.
6. Air exhausted from the vacuum cleaner is
normally warm.
But if extraordinarily hot air is exhausted, check
if the tube, hose or air filter is clogged or not.
7. Electric shock could occur if used outdoors or
on wet surfaces.

DESCRIPTION
-4-
Optional
Carpet Master Carpet/Floor Nozzle
Spray Nozzle
Frame Brush
Crevice Tool
Shampoo Bottle
Brush Dusting Brush
Upholstery Nozzle
Window Master
Small Shampoo Nozzle
Shampoo Button
Inlet Dust
Switch Button
Power Cord
Red Mark
Yellow Mark
Hose
Hose Handle Dust Tank
Clamp
Shampoo
Tank Cap
Spray Nozzle
Shampoo
Lever
Pipe
Pipe
Cover
Shampoo Tank
Cord Reel Button
Handle

SPECIFICATIONS
-5-
• MODEL : REFER TO THE COVER PAGE
• POWER SOURCE : ON RATING PLATE
• POWER CONSUMPTION : ON RATING PLATE
• CAPACITY : WATER 5.0 , DRY 6.0
• CORD LENGTH : 6m
• HOSE LENGTH : 1.8m
• NET WEIGHT : 9.5Kg
• PACKING WEIGHT : 15Kg
• NET DIMENSION : 493 x 361 x 398 (W x D x H)mm
• PACKING DIMENSION : 565 x 385 x 565 (W x D x H)mm
• This specifications are subject to change according to
the buyer's request.
• ATTACHMENTS
F/HOSE ASSY.............................................................1EA
STAINLESS PIPE........................................................2EA
CARPET MASTER.......................................................1EA
CARPET/FLOOR NOZZLE..........................................1EA
WINDOW MASTER .....................................................1EA
SMALL SHAMPOO NOZZLE.......................................1EA
MAIN SPRAY NOZZLE................................................1EA
CREVICE TOOL ..........................................................1EA
DUSTING BRUSH .......................................................1EA
UPHOLSTERY NOZZLE..............................................1EA
SHAMPOO BOTTLE....................................................1EA
DISASSEMBLY
1. Open the Top Cover Assy.
1) Separate flexible hose assy. 2) Grasp clamps and open the Top Cover Assy by
lifting.
NOTE: Before attempting to service or adjust any part of the vacuum cleaner, disconnect the electrical power
supply cord from the wall outlet.
•Almost all the parts of this vacuum cleaner can be assembled with a screw driver and each connecting
component easily fits each other.
Disassemble one by one referring to the exploded view.
•If possible, don't disassemble except for the necessary parts. It is not necessary to disassemble the parts that
are not detailed in the exploded view.

-6-
3) Separate Dust Tank and Shampoo Tank.
2. Body Base Assy Replacement
1) Separate Exhaust Cover Assy.
2) Remove seven screws fastening the Body Cover
Assy on the Body Base Assy.
3) Separate Body Cover Assy by lifting.
Dust Tank
Shampoo Tank

-7-
3. Motor Assy Replacement
•Lift the motor assembly in direction of the arrow.
•Stripe off lead wires.
4. Cord Reel Assy Replacement
•Lift the Cord Reel Assy from the body base in
direction of the arrow after stripping off lead wires.
5. Pump Assy Replacement
1) Take out the Snap Ring and pull out the pump
tube.
2) Take out buttons on button setting.
Snap
Ring
Snap
Ring

-8-
3) Remove two screws fastening Button Setting and
separate the button setting on body base.
4) Remove four screws fastening the Pump on the
Body Base.
5) Separate E-ring using pump nipple.
Button Setting

-9-
TROUBLESHOOTING
1. SWITCH ON BUT MOTOR DOES NOT RUN
Checking Cause Solution
2. SWITCH ON, MOTOR DOES NOT RUN BUT BUZZES
Check the power
source. Poor plug insertion
Power cord cut
Interior lead wire cut
Motor(stator armature)
coil cut or damaged
Poor contact carbon
brush defaced
Poor switch contact point
Insert again
Repair or exchange
Exchange the lead wire
Exchange the motor
Exchange or repair
Exchange the switch
Motor armature cut Exchange the motor
Exchange the motor
Remove the foreign
matters
Ball bearing defacement
Impeller hindrance
(Caused by foreign matters)

-10-
3. SWITCH OFF BUT MOTOR RUNS
4. WEAK SUCTION POWER
5. SWITCH ON BUT PUMP DOES NOT OPERATE
Low rotation speed
Motor armature cut
Carbon brush defaced Exchange the carbon
brush or the motor
Exchange the motor
Remove the foreign
matters
Inquire to the Power utility
company
Foreign matters attached
to the impeller
Low voltage
Poor connection Repair
Exchange the switchPoor switch
Motor runs normally,
but suction power is
weak.
Hose and extension wands
are clogged with foreign
matters
Remove the foreign
matters in the hose or
extension wands
Poor connection Repair
Exchange pumpNo-pumping
Air filter is clogged. Clean the Air filter.

-11-
6. VIBRATION NOISES
7. RADIO, TV RECEPTION DISTURBANCE
8. IMPROPER HOSE OR NOZZLE CONNECTION
Loose parts Secure firmly
Exchange or repair
the motor
Remove the foreign
matters
Exchange the carbon
brush or the motor
Exchange motor
Remove foreign matters
Unbalanced motor
assembly
Foreign matters are attach
to the impeller
Poor carbon brush
rectification
Armature is cut or foreign
matters attached
Poor cord, lead wire Exchange cord, lead wire
Exchange the carbon
brush or the motor
Repair the electric
connector or receiver
Exchange the capacitor
Poor carbon brush
rectified
Poor electric connector or
receiver
Poor capacitor
Bent connection parts Exchange the parts
Remove the foreign matters
and reconnect
Poor connection
(Caused by foreign matters)

-12-
SCHEMATIC DIAGRAM
SCHEMATIC DIAGRAM
P
M
BR
CORD REEL ASSY
BL
RD
RD
PUMP S/W2
WH
PUMP S/W1
WH
T/P
PUMP
PWB ASM
BK
MOTOR S/W2
BK
MOTOR
BL
MOTOR S/W1
BL
PUMP S/W
C1
0.47∝F
250V MOTOR
MOTOR S/W
PUMP
THERMAL CUTOUT
PM

-13-
EXPLODED VIEW
239401343501 243501
158591
C43501
239202
737001444801
235514252302
146611
158591
130411
247891
168771 158592
130401
140362
168711 139202
146811
139205
139204
239402
236601
144411
250204
250203
249701
450203
452112
266011
BASE ASS'Y, BODY
COVER ASS'Y,
EXHAUST
146871

-14-
748394
349011
135502
140361
333003
750061
340365
748381
250202
249702
139201
152301
235501
231121
750062
333002
748382
136501
748391748395
235511
TANK ASS'Y, DUST
COVER ASS'Y, BODY
TANK ASS'Y, SHAMPOO

-15-
335511 336501
336502
339203
335504
347691
135515
152313
348602
348601
335505
139203
349742
COVER ASS'Y,TOP

-16-
652032
449321
449401
552498
552500
452111
652011
552496
552492
552497
552491
552501
552499
650771
652491 652031
650581
452151

-17-
REPLACEMENT PARTS LIST
LOCATION No. DESCRIPTION P/No REMARK
C43501 E-RING 4O80070C
130401 BASE, BODY 3040FI1518D
130411 BASE ASSY, BODY 3041FI1519D
135502 COVER, FRONT 3550FI1742D
135515 GUIDE, FILTER 4974FI2403A
136501 HANDLE, CARRIER 3650FI3339A
139201 PACKING, DUST SEAL 3920FI3543T
139202 PACKING, MOTOR MOUNTING 3920FI3847A
139203 PACKING, DUST SEAL 3920FI3534V
139204 PACKING, SEAL 3920FI4678B
139205 PACKING, MOTOR 3920FI3843A
140361 SEAL 7526FI4727H
140362 PACKING, SEAL 3920FI3849A
144411 CASTER ASSY 4441FI3610A
146611 WHEEL ASSY 4661FI3623D
146811 MOTOR ASSY, VC 4681FI2469A
146871 CORD REEL ASSY 4687FI1482K
152301 FITLER, MOTOR SAFETY 5230FI4015B
152313 FILTER ASSY, CLEAN 5231FI2485A
158591 PUMP ASSY 5859FI2423D
158592 PUMP 5858FI2424A
168711 PWB ASSY, MAIN 6871FX3062D
168771 CONNECTOR ASSY 6877FI3710B
231121 OUT CASE 3112FI1001A
235501 COVER, BODY 3550FI1741D
235511 COVER ASSY, BODY 3551FI1620D
235514 COVER, EXHAUST FILTER 3550FI2578D
236601 HOUSING, MOTOR 3660FI1244A
239202 PACKING, SEAL 3920FI3844A
239401 FILTER, MOTOR SAFETY 5230FI4015B
239402 SPONGE, ABSORBING 3940FI3749A
243501 CONNECTOR, RING 4932FI3224D
247891 NIPPLE ASSY 4789FI3686A
249701 SPRING, BUTTON 4970FI4511P
249702 SPRING, BUTTON 4I70024F
250202 BUTTON, CORD REEL 5020FI3804A BLACK
250203 BUTTON, SHAMPOO 5020FI3802A BLACK
250204 BUTTON, POWER 5020FI3803A BLACK
252302 FILTER, EXHAUST 4036FI3639B
266011 SWITCH ASSY, POWER 6601FI3149B
333002 PLATE, COVER 3300FI3698A
333003 PLATE, COVER 3300FI3699A
335504 COVER, TOP 3550FI1776A

LOCATION No. DESCRIPTION P/No REMARK
335505 COVER, INNER 3550FI1744D
335511 COVER ASSY, TOP 3551FI1657A
336501 HANDLE, UPPER 3850FI2424A
336502 HANDLE, LOWER 3850FI2425A BLACK
339203 PACKING, DUST SEAL 3920FI3534U
340365 PACKING, DUST SEAL 3920FI4718V
343501 PACKING, DUST SEAL 3920FI3524W
347691 FLOAT 4769FI3001A
348601 CLAMP(L) 4860FI3682A BLACK
348602 CLAMP(R) 4860FI3683A BLACK
349011 DAMPER ASSY 4901FI3436K
349742 GUIDE ASSEMBLY, BUOY 4975FI3002A
444801 HOOK, CONNECTOR 4480FI3751A
449321 CONNECTOR(MECH), HOSE ASM 4932FI3229A
449401 KNOB SLIDE 4940FI3722A
450203 BUTTON, SETTING 5020FI3805A
452111 TUBE ASSY 5211FI3001A
452112 TUBE 5210FI3724H
452151 HOSE ASSY, FLEXIBLE 5215FI1304C
552491 NOZZLE ASSY, FLOOR 5249FI1421C BLACK
552492 NOZZLE ASSY, SPRAY 5249FI1422A
552496 NOZZLE ASSY, WINDOW 5249FI1424A
552497 NOZZLE ASSY, SMALL SPRAY 5249FI1423A
552498 BRUSH ASSY, FRAME 3211FI3700A
552499 NOZZLE, WINDOW 5249FI3697A
552500 NOZZLE ASSEMBLY, WATER 5249FI3696A
552501 FRAME ASSEMBLY, BRUSH 3211FI3701A
650581 TOOL, CREVICE 5058FI3345A
650771 BOTTLE ASSY, SHAMPOO 5077FI3722A
652011 PIPE ASSY, STEEL 5201FI2433C
652031 BRUSH ASSY, DUST 5203FI3737A
652032 BRUSH ASSY, FILTER CLEAN 5203FI3754A
652491 NOZZLE ASSY, UPHOLSTERY 5249FI3690A
737001 NET 3700FI4684A
748381 TANK, SHAMPOO 4838FI1409A
748382 TANK, DUST 4838FI1410A
748391 TANK ASSY, SHAMPOO 4839FI1012A
748394 GUIDE, AIR 4974FI1005A
748395 TANK ASSEMBLY, DUST 483FI1013A
750061 CAP, SHAMPOO TANK 5006FI2009A
750062 CAP, TANK 5006FI3701A
-18-
REPLACEMENT PARTS LIST

REPLACEMENT PARTS LIST
-19-
LOCATION NO. DESCRITION DEEP GRAY BLACK TITAN SILVER PETER RED REMARK
130401 BASE, BODY 3040FI1518D 3040FI1518C 3040FI1518B
3040FI1519D 3040FI1519C 3040FI1519B C-2 TYPE
130411 BASE ASSY, BODY 3040FI1519F B-3 TYPE
3040FI1519G C-1 TYPE
135502 COVER, FRONT 3550FI1742D 3550FI1742C 3550FI1742B
146611 WHEEL ASSY 4661FI3623B 4661FI3623D 4661FI3623B
231121 OUT CASE 3112FI1001A 3112FI1001B 3112FI1001A
235501 COVER, BODY 3550FI1741D 3550FI1741C 3550FI1741B
235511 COVER ASSY, BODY 3551FI1620D 3551FI1620C 3551FI1620B
235512 COVRE ASSY, EXHAUST 3551FI2436D 3551FI2436C 3551FI2436B
235514 COVER, EXHAUST FILTER 3550FI2578D 3550FI2578C 3550FI2578B
3550FI1776A 3550FI1776B 3551FI1776C CIS
335504 COVER, TOP 3551FI1776E UK, LAL
3550FI1776B NAE
3551FI1657A 3551FI1657B 3551FI1657C CIS
335511 COVER ASSY, TOP 3551FI1776E UK, LAL
3551FI1657F NAE
• COLOR & PARTS NUMBER
LOCATION NO. DESCRITION PRAT No. REAMRK
4687FI1482K C-2 TYPE
146871 CORD REEL ASSY 4687FI1482Q B-3 TYPE
4687FI1482T C-1 TYPE
5077FI3722A ENGLISH/RUSSIAN
650771 BOTTLE ASSY, SHAMPOO 5077FI3722C ENGLISH/KOREAN
5077FI3722D ENGLISH/ARABIC
5077FI3722E ENGLISH/SPANISH
• CORD REEL & SHAMPOO BOTTLE ASS'Y PARTS NUMBER

-20-
APPENDIX
•THE TYPE OF POWER CORD & PARTS NUMBER
17
12.7
17
6.3
19
19
4.8
19
4
Type Type of plug
Cord Reel ASS'Y P/No.
(L/No. : 146871)
A - 1
4687FI1482K
3040FI1519G
4687FI1482Q
S - 1
C - 1
B - 3
C - 2
Brown 13A
Yellow 5A
Color identification of
fuse