Life Assistant SitnStand User manual

QUICK-START
GUIDE
Manufacture
Life Assistant LTD;
8 Harod St. Afula, 1871208, ISRAEL
Doc.# LAPLAB.000.010_R1 October 2020
CONGRATULATIONS!
Thank you for choosing Life Assistant Ltd
SitnStand - Portable Smart Rising Seats.
This Quick-Start Guide is a condensed set-up guide for
the SitnStand. Please refer to the formal SitnStand User
Manual for the detailed set-up and operating instructions
before you start using the SitnStand for the rst time.
WHAT IS IN THE BAG
- 1 x SitnStand device
- 1 x Rechargeable battery
- 1 x User manual
- 1 x Carrying bag
- 1 x Desiccant
HELP AND SUPPORT
If for any reason you require additional assistance, help, or you have
any specic questions, please refer to our website for the following:
1. How to use video
2. FAQ’s
3. Submit An Inquiry
In order to contact us, you can also reply to this email (Amazon email).
SETUP INSTRUCTIONS
Setting up the SitnStand is performed by the user.
The setting up process consists of three steps:
1. Charging the battery for the rst time.
2. Placing the SitnStand on an appropriate seat.
3.Connecting the battery.
1- CHARGING THE BATTERY FOR THE FIRST TIME-FIGURE 1
Charge the battery for at least 12 hours before use:
1. Remove the battery from the box
2. Plug in the battery charger into an electric wall socket
3.
Connect the battery charger connector to the battery charging
socket
4. When the green light is on, battery is fully charged
5. When red light is on, battery is not fully charged
NOTE: To prevent falling over any tangled cable, place the battery close
to the charger.
Figure 1

2- PLACING THE SITNSTAND ON A SUITABLE SEAT –
FIGURE 2
Selection of an Appropriate Seat
When selecting the seat on which the SitnStand will be tted, it is advisable to
select a seat that is steady, stable and cannot be easily moved. An armchair is
preferable.
An appropriate seat size for the SitnStand should be at least the minimum size of
the SitnStand seating area in its deated state, with at least one arm rest.
Following the Appropriate Seat Selection
Place the seating area of the SitnStand directly onto the chair seat.
In most cases the SitnStand seat and backrest area should be placed in perfect
alignment with the seating area of the seat itself as illustrated in Figure 2;
however, in some cases location can be adjusted differently.
The rear area of the SitnStand should be laid over the rear area of the chair, as
illustrated in Figure 2.
Placing a standard back pillow between the SitnStand backrest area and the chair
backrest is an option.
Rear Area
Back Rest Area
Seating
Area
Figure 2
Battery
and Air
Supply Unit
4- CONTROLLER INDICATOR MODES - FIGURE 4
1. Standby Mode – the Green light ashes slowly (about one ash per second)
– the SitnStand is now ready for use and is waiting for your action.
2.
Working Mode – the Green light ashes quickly (about 5 times a second) –
The SitnStand is operating (while in this mode, the buttons will not respond).
3. Charge Battery – the Orange light is on while the Standby/ Working mode
green light is also ashing as described in 1 or 2 above – indicating that the
battery needs recharging.
4.
Charge Battery – the Orange light is on and Standby/Working mode Green
light is off – battery is depleted. In this case, the SitnStand cushion can only
be deated.
5.
Error – the Red and Green lights ash quickly – The SitnStand has
identied a system fault – See troubleshooting chapter.
Figure 3
Figure 5
3 - PLACING THE BATTERY IN ITS PLACE – FIGURE 3
Slide the charged battery into its place within the air supply unit, as illustrated in
Figure 3. The SitnStand is now in standby mode, and is ready for use.
Figure 4
Charge Battery
Legend
Standing By/ Working Mode
Malfunction
Up Button
Down Button
5- SITTING DOWN
To sit down – inate the cushion using the controller to 1,2,3 or 4 layers (whichever
is most comfortable for you), then sit down on the pillow facing forward.
When you feel steady, start deating the cushion by pressing on the Down Arrow
button on the controller.
NOTE: One press on the Down Arrow button deates the air from one
layer only. Continuous pressing on the Down Arrow will deate air from
the next layer automatically.
6 - STANDING UP
To stand up – First, disconnect your upper-back from the SitnStand backrest area,
and only then, start inating the cushion one layer at a time by pressing the Up
Arrow button on the controller.
NOTE: One press on the Up Arrow button inates the air in one layer
only, and does not continue to the next layer until the previous is
inated and the button is pressed again; continuous pressing on the
Up Arrow will inate the next layer automatically.
The SitnStand has 4 layers: however, Ination can be ended at any time when the
level of elevation is sufcient.
Do not attempt to stand up before the layer is totally inated and there is no sound
from the air pump.
The SitnStand may remain inated until the next time it is used for sitting down.
7- REPLACING THE BATTERY – FIGURE 5
When the Charge Battery indicator turns Orange, battery should be charged.
Open the zipper covering the air supply unit and remove battery by sliding it
towards you as illustrated in Figure 5.
The battery is connected by a magnet to the air supply unit.
Figure 6
8- CHARGING THE BATTERY- FIGURE 6
1. Plug the battery charger into an electric wall socket.
2. Connect the battery charger connector to the battery charging socket.
3.
When the Red light on the charger changes to Green, the battery is fully
charged.
4. When the Red light is on, the battery is not fully charged
USING THE SITNSTAND
NOTE: Don't remove the battery while the SitnStand is at "Working
Mode" (see controller indicator modes).
NOTE: Don't remove the battery while the SitnStand is at
"Working Mode" (see controller indicator modes)