Life Smart HF93051KLQR-M1903 User manual

Owner’s Manual
HF93051KLQR-M1903
IMPORTANT SAFETY INFORMATION:
ety, always comply with all warnings and safety instructions contained in this manual to prevent personal
injury or property damage.
Questions, problems, missing parts? Contact technical support
department at 657-341-0362, 9:00 a.m. - 5 p.m., PST, Monday -
Friday or email us at [email protected]
Please have your model number ready • www.lifesmartcomfort.com

2
Table of Contents
Always use a qualified technician
or service agency to repair
this stove.
!
NOTE: Procedures and
techniques that are considered
important enough to
emphasize.
CAUTION: Procedures
and techniques which, if not
carefully followed, will result in
damage to the equipment.
WARNING: Procedures
and techniques which, if not
carefully followed, will expose
the user to the risk of fire,
serious injury, or death.
CAUTIONS
. ................ . . . . . . . . . . . . . 3
IMPORTANT INSTRUCTIONS ...............4
Quick Reference Guide . ....................5
Fireplace Installation . ............. . . . . . . . . 5
Operation . .............................. .6
Maintenance............................. .7
Warranty . .............................. 8
Replacement Parts . ......................10
Trouble shooting ......................... 9

3
Please carefully read and save these instructions.
CAUTION: Read all instructions and warnings carefully before
starting installation. Failure to follow these instructions may result in
a possible electric shock, fire hazard and will void the warranty.
Please record your model and serial numbers below for future
reference: model and serial numbers can be found on the Model and
Serial Number Labels of your stove.
NO NEED TO RETURN TO THE STORE
Questions with operation or assembly? Require Parts Information?
Product Under Manufacturer’s Warranty?
Contact us at: 
For Troubleshooting and Technical Support
OR
Monday to Friday 9:00 a.m. to 5:30 p.m. PST
Please have your model number and product serial
number ready. (See above)
[email protected]

4
IMPORTANT INSTRUCTIONS
When using electrical appliances,basic
precautions should always be followed
to reduce the risk of fire, electric shock,
and injury to persons, including the
following:
① Read all instructions before using this
heater.
②This heater is hot when in use. To
avoid burns, do not let bare skin touch
hot surfaces. If provided, use handles
when moving this heater. Keep com-
bustible materials, such as furniture,
pillows, bedding, papers, clothes, and
curtains at least 3 feet ( 0.9m) from the
front of the heater and keep them away
from the sides and rear.
③ Extreme caution is neces sary when
any heater is used by or near children or
invalids and whenever the unit is left
operating and unattended.

Do not operate any heater with a
⑥ Do not use outdoors.
⑦
To prevent a possible fire, do not block air
⑨
⑩
⑤
④
To disconnect heater, turn controls to off,
Do not insert or allow foreign objects to enter
All electric heaters have hot and arcing or
Use this heater only as described in this
damaged cord or plug or after the heater
malfunctions,has been dropped or
damaged in any manner. Discard heater,
or returnto authorized service facility for
examination and/or repair.
and then remove plug from outlet.
intakes or exhaust in any manner.Do not use
on soft surfaces, like a bed, where openings
may become blocked.
sparking parts inside. Do not use it in areas
where gasoline,paint, or flammable vapors or
liquids are used or stored.
manual. Any other use not recommended by
the manufacturer may cause fire, electric
shock, or injury to persons.
any ventilation or exhaust opening as this may
cause an electric shock or fire, or damage the
heater.
SAVE THESE INSTRUCTIONS
Always plug heaters directly into a wall
outlet/receptacle. Never use with an extension
cord or relocatable power tap (outlet/power
strip).
Always unplug heater when not in use.
This heater is not intended for use
in bathrooms, laundry areas and similar
indoorlocations. Never locate heater
where it may fall into a bathtub or other
water container.
⑧Do not run cord under carpeting. Do not
cover cord with throw rugs, runners, or
similar coverings. Do not route cord under
furniture or appliances. Arrange cord away
from traffic area and where it will not be
tripped over.
⑪
⑫
⑬
⑭

5
Fireplace Installation
!NOTE: A 15 Amp, 120 Volt
alternating current (VAC)
circuit is required. A dedicated
circuit is preferred but not
essential in all cases. A
dedicated circuit will be
required if, after installation,
the circuit breaker trips or
blows fuses on a regular basis
when the heater is operating.
Additional appliances on the
same circuit may exceed the
current rating of the circuit
breaker.
WARNING: Ensure the power
cord is not installed so that
it is pinched or against a
sharp edge and ensure that
the power cord is stored or
secured to avoid tripping or
snagging to reduce the risk of
fire, electric shock or injury to
persons.
Construction and electrical
wiring must comply with local
building codes and other
applicable regulations to
Quick Reference Guide
①Prior to the first use of the
Sub-Compact Stove verify the
following:
•Are the circuit breakers for the
unit on?
②The heater on your Sub-
Compact Stove may emit a slight,
harmless odor when first used.
This odor is a normal condition
caused by the initial heating of
internal heater parts and will not
occur again.
③If you have any technical
questions or concerns regarding
the operation of your Sub-
Compact Stove, or require service
contact Customer Service at
before returning
the product to the point of
purchase.

6
reduce the risk of fire, electric
shock and injury to persons.
Do not attempt to wire your
own new outlets or circuits. To
reduce the risk of fire, electric
shock or injury to persons,
always use a licensed
electrician.
Installation
①Make sure the unit’s Main On/
Off Switch is switched Off (refer to
operating instruction section).
②Plug the unit into a 15 Amp,
120 VAC outlet.
Fireplace Installation
Operation
The controls are located on
the right side of the heater panel
(Figure 1).
A. Main On/Off Switch 1
The Main On/Off switch supplies
power to all unit functions (heat/
flame).
B. Heat On/Off Switch 2
The Heat On/Off Switch supplies
power to the heater fan and the
heater element.
C. On/Off Remote Control 3
The On/Off Remote Control is
included, ensure the Main Switch
1 is in ON, is for switch ON,
is for switch OFF.
Figure 1
1
0
I
0
I
2
3
NOTE: 2-AAA Batteries Not Included.

7
Clear Door Panel Cleaning
The clear door is cleaned in
the factory during the assembly
operation. During shipment,
installation, handling, etc., the
Maintenance
clear door may collect dust
particles. These can be removed
by dusting lightly with a clean, dry
cloth.
To remove fingerprints or other
marks, the clear doors can be
cleaned with a damp cloth. The
clear door should be completely
dried with a lint free cloth to
prevent water spots. To prevent
scratching, do not use abrasive
cleaners or spray liquids on the
clear door surface.
Sub-Compact Stove
Surface Cleaning
Use warm water only to clean
painted surfaces of the Sub-
Compact Stove. Do not use
abrasive cleaners.
Servicing
Except for cleaning described
above, an authorized service
representative should perform
any other servicing.
WARNING:
Make sure the power is turned off before proceeding with repairs. Any electrical repairs or rewiring of this unit should be
carried out by a licensed electrician in accordance with national and local codes. If repairing or replacing any electrical component or wiring,
the original wire routing, color coding and securing locations must be followed. During any service of this appliance, the power to the unit
must be turned off. First turn the main power switch to the OFF position. Then remove the electrical plug from the wall outlet.
WARNING:
Electrical outlet wiring must comply with local building codes and other applicable regulations to reduce the risk of re,
electrical shock and injury to persons.
WARNING:
Keep electrical cords, drapery, furniture and other combustibles at least 3 ft (0.9 m) from the front of the heater and away
from the sides.
WARNING:
I
WARNING:

8
Warranty
657-341-0362, 9:00 a.m. - 5 p.m., PST, Monday - Friday
or email us at [email protected]. Please have your model number ready • www .lifesmartcomfort.com
unathorized purchases from third party retailers. (authorization in writing)

9
TROUBLE SHOOTING
PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION
The heater does not blow warm
air.
The heater is in a cool down
cycle.
This is normal operation and the heater will continue to run for several
minutes before shutting down. Times will vary based on temperatures.
During this time cool air will blow.
There is no power. There is no power to the unit. Check that unit is plugged into a standard 120V outlet. Press the Power
button several times and make sure the power is set to the “ON” position.
The heater does not blow any
air. Thermostat setting is preventing
heater from turning on.
Adjust the temperature settings to ensure that the thermostat is set higher
than the current room temperature.
The heater does not work, but
Power and Heater settings are
“ON” and thermostat is set.
Manual reset overheat
protection triggered.
Turn the Power to “OFF” and unplug the unit from the wall outlet for 5
minutes. After 5 minutes plug the unit back into wall outlet, and operate as
normal. If the problem persists contact customer service.
The noise when the heater is on
is louder than normal. a. The air intakes are dirty or
obstructed.
b. The blower/heater assembly
is defective.
a. Check the air intakes for obstructions or high dust build up.
b. Contact Customer Service for a new Heater/Blower Assembly.
Abnormal noise when the heater
is on.
The Gear motor is defective. Contact Customer Service for a new Gear Motor.

10
Replacement Parts
Part Description Qty.
A Mantel 1pc
B 1set
CFlame Circuit Board 1set
D1pc
E2pcs
F1pc
G
Remote Circuit Board
2pcs
H1pc
IGear Motor 1pc
Cut-out
Blower Motor Assembly
Infared Heating Element
Manual Switch
Log set
460000010400_R00
450000021200_R00
430000130101_R00
460000030100_R00
430000121001_R00
440000460000_R00
440000150100_R00
510400330100_R00
M1903
NOTE: The scale and size of parts may be different
depending on your exact model.
Part Number
I
G
For replacement parts, call our customer service department at 657-341-0362, 9:00 a.m. - 5 p.m., PST, Monday - Friday
or email us at [email protected]. Please have your model number ready • www.lifesmartcomfort.com
F
E
C
D
J
A
B
H
1pc
Remote Control HF93051KLQR-I
J