Life Span ROWER 601 User manual

1
OWNER’S MANUAL
MAGNETIC ROWING MACHINE

2
SAFETY NOTICE
Thank you for shopping with us. To guarantee your safety and health ,and ensure you use this
equipment correctly，please read the information below carefully before using it.
1. It is important to read this entire manual before assembling and using the equipment.
Safe and effective use can only be achieved if the equipment is assembled, maintained and
used properly. It is your responsibility to ensure that all users of the equipment are informed
of all warnings and precautions.
2. Before starting any exercise program you should consult your doctor to determine if you
have any medical or physical conditions that could put your health and safety at risk, or
prevent you from using the equipment properly. Your doctor’s advice is essential if you are
taking medication that affects your heart rate, blood pressure or cholesterol level.
3. Be aware of your body’s signals. Incorrect or excessive exercise can damage your health.
Stop exercising if you experience any of the following symptoms: pain, tightness in your
chest, irregular heartbeat, and extreme shortness of breath, lightheadedness, dizziness or
feelings of nausea. If you do experience any of these conditions you should consult your
doctor before continuing with your exercise program.
4. Keep children and pets away from the equipment. The equipment is designed for adult use
only.
5. Use the equipment on a solid, flat level surface with a protective cover for your floor or
carpet. To ensure safety, the equipment should have at least 0.5 meters of free space all
around it.
6. Before using the equipment, please check that the nuts and bolts are securely tightened. If
you find any defective components while assembling or checking the equipment, or if you
hear any unusual noises coming from the equipment during use, stop immediately. Do not
use the equipment until the problem has been rectified.
7. Wear suitable clothing while using the equipment. Avoid wearing loose clothing that may get
caught in the equipment or that may restrict or prevent movement.
8. This equipment is designed for indoor and family use.
9. Care must be taken when lifting or moving the equipment so as not to injure your back

3
Ⅱ EXPLODED VIEW

4
Ⅲ PART LIST
NO. NAME SPEC. QTY NO. NAME SPEC. QTY
1 Meter 1 49 Footplate bound 2
2 Meter case 1 50 Knob M16×27 1
3 Meter Mount 1 51 Belt 1
4 Bolt M5×10 7 52 Bushing Φ15×Φ10.2×11 1
5 Trunk Line 1 53 Bearing 6000Z 2
6L/R
Footplate
w/roller L/R 1 54 Mid-axes 1
7 Bolt M8×50 2 55 Aluminum belt
roller Ф200 1
8 Flat Washer Φ16×Φ8×1.5 13 56 Rubber rope 1
9 Front stabilizer 1 57 End cap 2
10 Flat Washer Φ12×Φ5×1.0 2 58L/
R Chain Cover 1
11 Bolt ST4.2×16 2 59 Bolt ST4.2×20 13
12 Nut M10×1.0 4 60 Bolt M12×1.75×139 1
13 Thin Nut M10×1.0 3 61 Bushing Φ50×Φ12×23 2
14 Bushing Φ15×10.2×3 2 62 Aluminum rail
link 1
15 Idle pole 1 63 Flat washer Φ22×Φ12.5×2.0 1
16 Nut M10 1 64 Nylon Nut M12×1.75 1
17 Flywheel 1 65 Saddle 1
18 Tension spring 1 66 Round magnet 1
19 Idler 1 67 Bolt M8×28 6
20 Flat washer Φ17×Φ6×1.5 1 68 Bushing Φ12.5×Φ8.2×10 6
21 Bolt M6×12 1 69 Plastic Trolley 6
22 Plat washer Φ32×Φ8×2.0 1 70 Saddle post join L/R 1set
23 Bolt M8×35 3 71L/
R Bolt M6×15 2
24 Bearing 608 6 72 Bolt M8×20 2
25 Pulley Φ50 ×24 3 73 Aluminum rail 2
26 Bushing Φ12×Φ8.2×10 3 74 Axes Φ10.9×80 2
27 Bolt M8×40 1 75 Locating Mount 4
28 Nylon Nut M8 9 76 Flat washer Φ17×Φ6×1.5 2
29 Bushing 2 77 Aluminum rail
support frame 1
30 Bearing 6000Z 2 78 Back stand
fixture 1

5
31 Pulley 1 79 Bolt M5×20 1
32 Bushing 1 80 Back stand 1
33 Bolt M10×112 1 81 Bolt M5×15 2
34 Nylon Nut M10×1.25 1 82 Sensor 1
35 Handlebar mount 1 83 Bolt ST3×10 2
36 Bolt M4×10 2 84 Hex Nut M10 2
37 Main Frame 1 85 Bolt M10 2
38 Sponge tube 2 86 Steel Ball SΦ5 2
39 End cap 2 87 Setting bolt
spring 2
40 Handlebar 1 88 Bolt 2set
s
41 Belt 1 89 Fixed axes 2
42 Motor 1 90 Allen Wrench S5 1
43 Bolt M5×15 4 91 Allen Wrench S6 1
44 Tension Cable 1 92 Spanner S17、S19 1
45 Rubber Board 1 93 Adaptor 1
46 Power Supply
Wire 1
94 Nut M12 1
47 Bolt M12 ×160 4
48 Footplate 2

6
Ⅳ ASSEMBLY

7
Step 1：
Assemble the Front stabilizer (9) to Main frame (37) using Bolt (7) and Flat washer (8).

8
Step 2：
Attach both Footplate (48) to the Main frame (37) using Bolt (47).

9
Step 3：
1. Push Saddle (65) into the groove of the Aluminum rail (73).
2. Assemble the Locating Mount (75) to the Aluminum rail (73) using Axes (74), Flat
washer (76), and Bolt (71).

10
Step 4：
1. Connect the Trunk line (5) to the out wire of Sensor (82).
2. Invaginate the Aluminum rail (73) in the Aluminum rail link (62), and then tightly
assemble them together using Bolt (72) and Flat washer (8)
3. Tighten the Aluminum rail link (62) using Knob (50) to avoid a wobble of the
Aluminum rail (73) and Main frame (37)

11
Step 5：
1. Pull the Belt(41) out from the hole under the meter ,hold it to avoid rebounding, and at
the same time insert the handlebar(40) to the Belt in place of paper(E)
2. Insert the adaptor (93) into the socket.
3. Assemble finished!
Please ensure all parts are fully tightened before using.

12
Ⅵ Function Instruction
It can get a best angle of view by rotating the
meter screen. As picture shown: A is the
normal state; B is the state of rotating
backwards.

13
The Aluminum rail can be
folded when the machine is
unused, so as not to take up space.
Operation is as follows:
1、 Unscrew the Know (50) until
the taper completely withdraw
from the Aluminum rail link
(62), and at the same time
draw the Know down until it
cannot move anymore. Then
uprear the Aluminum rail by
the other hand to an angle
until the Knob (50) break
away from the Aluminum rail
link (62), and you can release
the Knob (50) now. As shown
in fig D.
2、 When the Aluminum rail
rotates to a certain angle the
Knob will automatically fit
into the hole on the Aluminum
rail link(62),after that screw
the Knob(50) tight. As shown
in figure F.
3、 Completed.
Attention！
It is easy to hit your
head when the rail is
standing upright.
Attention！
The saddle
will slide
down when
folding the
Aluminum
rail.

14
WARRANTY REGISTRATION
Please visit the following link to complete the product warranty form online. Please visit
http://warrantyform.lifespanfitness.com.au/
PLEASE NOTE: YOUR WARRANTY IS ONLY VALID IF YOU CAN PROVE YOU ARE THE
ORIGINAL PURCHASER ON THIS ITEM (i.e. A copy of the receipt, invoice, delivery
date or internet confirmation).
SERVICING: IF YOU FAIL TO COMPLY WITH LIFESPAN’S MAINTENANCE AND SERVICING
STEPS ABOVE, YOU MAY VOID YOUR WARRANTY. IF YOU REQUIRE A SKILLED LIFESPAN
REPRESENTATIVE TO UNDERTAKE ONE OF THE STEPS ABOVE, PLEASE EMAIL US AT
[e-mail].