Lifepro Revitaglow pro User manual

REVITAGLOW PRO

LIGHT THERAPY MASK

USER MANUAL

HELLO THERE.

Joel and I are athletes who suffered from

severe ACL injuries a few months apart.

We purchased multiple pieces of wellness

equipment for our in-home rehab but were

left disappointed and frustrated by wellness

and recovery devices that made big promises

but gave no support, no well-thought-out

plan to follow, and no results. And that’s how

Lifepro came about, and why the Wellness

Recovery collection was created — we’ve

set out to change all of that. It’s why every

piece of equipment bearing our name not only

undergoes rigorous scrutiny to make sure it

delivers on power and efﬁcacy, but also comes

with built-in support from our ‘guiding angels’

and a built-in lifetime warranty so that

you’re never left hanging.

Welcome to Lifepro.

We’re in this together now.

Dermatologists, aestheticians,

and spas use light therapy

for anti-aging and to smooth,

soothe, and rejuvenate skin.

Phototherapy is also used to

treat acne, rosacea, eczema,

psoriasis and other skin

conditions.

Light therapy is perfect for

all skin types, even sensitive

or irritated skin. Everyone can

experience the beneﬁts of

light therapy from the comfort

of their own home.

You don’t need expensive trips to the spa to get smoother, softer, more supple

skin. The Lifepro RevitaGlow Pro Light Therapy Mask provides professional-level

LED light therapy treatments from the comfort of your own home. Light therapy,

also called phototherapy, is a highly-effective, non-invasive, chemical-free way to

safely and painlessly repair and rejuvenate your skin. The RevitaGlow Pro consists

of both a face mask and a separate mask for the neck and upper-chest area. The

two masks may be used together or separately, depending on the desired treatment.

RevitaGlow Pro provides four light therapy treatment options in one simple, hands-

free solution:

• Red (630 nm) light improves blood circulation and boosts collagen and elastin

production, reducing the appearance of ﬁne lines, wrinkles, and scars. It

tightens pores, smooths skin tone, and reduces symptoms of eczema, psoriasis,

and rosacea including redness, itching, ﬂaking, swelling, and broken capillaries.

• Blue (415 nm) light has anti-bacterial beneﬁts and reduces inﬂammation. It

eliminates the bacteria that cause acne, regulates over-active oil/sebum glands,

and reduces pigmentation, sun damage, and skin scaling from psoriasis.

• Near-infrared (830 nm) light targets deep ﬁbroblast cells, stimulating collagen

and elastin production, resulting in plumper, ﬁrmer, more youthful-looking skin.

• Pink (630 nm + 415 nm) light provides the combined beneﬁts of red and blue

light.

Use the RevitaGlow Pro Light Therapy Mask three to four times a week for 15–20

minutes, and see results in as little as three weeks. The RevitaGlow Pro is lightweight

and portable. Take your beauty regimen to the next level and enjoy smoother, softer

skin anytime, anywhere!

Redeﬁne wellness and beauty as you experience the

transformative power of the Lifepro RevitaGlowPro:

Treat acne: kills acne-causing bacteria, regulates oil glands, reduces acne scarring.

Reduce lines and wrinkles: boosts blood ﬂow and increases collagen and elastin

production.

Detoxiﬁcation: improves lymphatic drainage and ﬂushes toxins.

Improve symptoms of eczema, psoriasis, and rosacea: reduces itching, ﬂaking,

redness, swelling, and inﬂammation.

Check out the information in this manual for ways to get started using the

RevitaGlow Pro. Be sure to visit our website revitaglowpro.lifeproﬁtness.com for

access to our FREE library of videos which demonstrate how to easily incorporate the

RevitaGlow Pro into your health and wellness routine.

Wellness Recovery Collection 5

6RevitaGlow Pro User Manual Lifepro

GET STARTED

WHAT’S IN THE BOX

• Lifepro RevitaGlow Pro Light Therapy Face Mask

• Lifepro RevitaGlow Pro Light Therapy Neck and Chest Mask

• Remote Control

• Micro-USB Charging Cable

• Velcro Straps (3 Pairs)

• Replacement Silicone Eye Protectors (1 Pair)

• User Manual

FIRST STEPS

1. Remove the RevitaGlow Pro and accessories from the shipping box and

inspect each item for shipping damage.

2. Carefully read all safety warnings and operating instructions before

using the RevitaGlow Pro.

3. Go to revitaglowpro.lifeproﬁtness.com and register your product within

14 days of purchase to activate your lifetime warranty.

4. Complete the steps in the EASY-START SETUP GUIDE on page 9 to

begin using the RevitaGlow Pro.

CUSTOMER SUPPORT

If you have any questions about setting up the RevitaGlow Pro, we’re

here to help. Call or email us and an experienced customer support

representative will be happy to assist you: (800) 563-6604 or

support@lifeproﬁtness.com.

REVITAGLOW PRO

LIGHT THERAPY MASK

WELLNESS RECOVERY

Wellness Recovery Collection 7

PARTS OF THE REVITAGLOWPRO

3 Pairs of Velcro®Straps

Each pair has one “hook” strap (left)

and one “loop” strap (right)

Silicone Eye Protectors (2)

Pair of Replacement

Eye Protectors

Slots for Velcro®Straps

(Left & Right)

Face Mask

Neck and Chest

Mask

Remote

Control

Plugs into the

Micro-USB Port

in the Base of the

Remote Control

Plugs into a

Charging Adapter

or USB Port

Micro-USB

Charging Cable

USB Cable USB Cable

Plugs into a USB

Port at the Top

of the Remote

Control

Plugs into a USB

Port at the Top

of the Remote

Control

Slots for Velcro®

Straps (two

each side)

8RevitaGlow Pro User Manual Lifepro Wellness Recovery Collection 9

Before your ﬁrst treatment, it is important to perform a skin sensitivity

test to ensure you won’t experience any adverse reactions to light therapy.

To do a sensitivity test:

1. Plug the face mask into the remote control and place the mask on your

inner arm, with the LEDs against your skin.

2. Press and hold the On/Off button for three seconds to turn on the

RevitaGlow Pro. Press on On/Off button a second time to begin the

session. Allow the entire default 10-minute treatment program to run.

3. If your skin feels uncomfortable or hot at any point during the test

treatment, stop using the RevitaGlow Pro immediately.

4. Wait at least 6 hours after the sensitivity test. If your skin becomes red

and/or itchy, you may be sensitive to light therapy and you should not

continue to use the RevitaGlow Pro.

NOTE: Please see a list of contraindications (people who should not use

this device) on page 20.

TESTING FOR SKIN SENSITIVITY

FCC STATEMENT

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause undesired operation.

NOTE: Changes or modiﬁcations not expressly approved by the party responsible for compliance

could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. However, there is

no guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

PREPARING FOR YOUR TREATMENT SESSION

• Wash your face, neck, and upper chest.

• Carefully pat your skin dry with a soft towel.

• Apply a light, soothing moisturizer to your skin, if desired.

SETTING UP THE MASKS

• Locate the three pairs of Velcro®straps.

• Attach two pairs of straps to the face mask and one pair of

straps to the neck mask following the instructions on page 10.

• Plug the USB cable exiting the bottom of the face mask into one

of the standard USB ports at the top of the remote control.

• Plug the USB cable exiting the bottom of the neck mask into the

other standard USB port on the remote control.

BEGINNING YOUR TREATMENT SESSION

• Lie down on a ﬂat comfortable surface, such as a bed or couch.

• Place the RevitaGlow Pro in position on your face, with the LED-

side against your skin.

• Fasten the Velcro®straps to secure the mask to your face

following the instructions on page 11.

• Lay the neck/chest mask on your upper chest and attach the

Velcro®straps to secure it around your neck following the

instructions on page 11.

• Press and hold the On/Off button on the remote control for

three seconds to turn on the RevitaGlow Pro.

• Adjust the time, color mode, and intensity as desired. See

OPERATING INSTRUCTIONS on the next pages for details.

• Press the On/Off button a second time to start the session.

EASYSTART SETUP GUIDE

10 RevitaGlow Pro User Manual Lifepro Wellness Recovery Collection 11

SECURING THE MASKS

ATTACHING THE VELCRO STRAPS TO THE FACE AND NECK MASKS

1. Locate the three pairs of Velcro®straps.

a. Each pair has one “hook” strap (with stiff plastic hooks) and one

“loop” strap (with soft, fuzzy loops).

b. One pair of straps will attach to the mask behind your head and the

other will attach to the mask across the top of your head.

2. Attach the ﬁrst pair of

straps to the face mask:

a. Insert the square end of

one strap through a slot

in the side of the face

mask and fold the end

over to secure the strap.

b. Insert the second strap

through the other slot

in the side of the face

mask and secure it in

the same manner.

c. Make sure the two

straps can be attached

(the hooks and loops

should face each other).

3. Attach the second pair of

straps to the face mask:

a. Insert the square end of

one strap through one

slot in the top edge of

the face mask and fold the end over to secure the strap.

b. Insert the square end of the second strap through the second slot in

the top edge and secure it in the same manner.

4. Attach the ﬁnal pair of straps to the neck mask in the same manner.

a. The straps insert through the slots in the side of the mask.

b. Make sure the two straps can be attached (the hooks and loops

should face each other).

SECURING THE FACE MASK TO YOUR HEAD

1. Place the mask on your face with the LEDs facing your skin.

2. Fasten the straps at the sides of the mask behind your head.

3. Fasten the straps on the top edge of the mask across the top of your

head.

4. Make sure the mask is snug to your face, but not too tight. Readjust

the straps if necessary.

SECURING THE CHEST MASK TO YOUR NECK

1. Place the neck mask on your chest with the LEDs facing your skin.

2. Fasten the straps at the sides of the mask behind your neck. Make sure

the mask is snug but not too tight.

12 RevitaGlow Pro User Manual Lifepro

OPERATING INSTRUCTIONS

Please read the operating instructions before using the RevitaGlow Pro

Light Therapy Mask. Keep this manual for reference.

CHARGING THE BATTERY

• Do not use the RevitaGlow Pro while it is charging. Always ensure it is

powered off before charging.

• To charge:

1. Ensure the RevitaGlow Pro is turned off.

2. Plug the micro-USB charging cable into the micro-USB port on the

bottom of the remote control.

3. Plug the standard USB end of the charging cable into:

a. A USB port on a computer or laptop, OR

b. A 5V–1A USB charging adapter. Then, plug the charging adapter

into a wall outlet.

• Your RevitaGlow Pro will typically take about 40 minutes to fully charge.

• The battery icon on the display screen shows the remaining battery.

• We recommend charging the device right away when less than 20%

battery remains.

• The RevitaGlow Pro will automatically power off when the battery is

depleted.

• The average run-time is about 2 hours per charge.

USING THE REMOTE CONTROL

1. Display Window: Shows the battery level and selected working time,

mode, brightness level, and pulse.

2. Battery Status and Icon: Shows the remaining battery charge.

3. Settings Button: Press to enter the settings menu and toggle

through each of the settings options, timer, mode, level, and pulse

(the frequency for pulsed-light therapy). An orange dot indicates the

selection. Use the and buttons to adjust the selected option.

4. On/Off Button: Press the button once to turn on the remote control.

The home screen will show the default treatment program. Press a

second time to begin the session (either using the default settings or

after adjusting the settings). Press a third time to turn off the remote

control and the device.

5. / (Increase/Decrease) Buttons: Press to adjust the selected

setting. For time, set the number of minutes, from 1–30 minutes, in

increments of 1 minute. For mode, toggle through the four modes,

RED (630 nm + 830 nm), BLUE (415 nm), NIR (830 nm), and

PINK (630 nm + 415 nm). For brightness level, set the brightness from

1–100% in increments of 1%. For pulse, set the frequency from 1–10 Hz

in increments of 1 Hz. “Null” indicates a pulse of 0 Hz (pulsed-light

therapy is off).

NOTE: On start-up, the home screen shows

the default program: 10-minute working time,

RED mode, 100% brightness level, and

“Null” (0 Hz) pulse frequency.

Wellness Recovery Collection 13

Timer

Mode

Level

Pulse

mins

10mins

RED

Level

Pulse

100%

Null

100%

Settings Menu

Home Screen

10mins

RED

Level

Pulse

100%

Null

100%

14 RevitaGlow Pro User Manual Lifepro Wellness Recovery Collection 15

USING THE REVITAGLOW PRO LIGHT THERAPY MASKS

1. Prepare to use the RevitaGlow Pro by following the instructions in

steps 1–3 of the EASY START SETUP GUIDE on page 9.

2. Lie down on a ﬂat comfortable surface, such as a bed or couch.

3. Place the face mask in position on your face, with the LEDs against

your skin, and attach the Velcro®straps to secure it.

4. Adjust the face mask until the eye protectors ﬁt comfortably around

your eyes.

5. Lay the neck and chest mask on your upper chest and attach the

Velcro®straps to secure it around your neck.

6. Press and hold the On/Off button on the remote control to turn on

the RevitaGlow Pro. The default treatment program will appear on

the home screen, RED (630 nm) mode, at 100% brightness level, for

10 minutes. Pulse is set to “Null” (off) by default.

7. Press the Settings button to toggle through the settings, time, mode,

brightness level, and pulse frequency, if desired An orange dot indicates

the selection. Then press the or button to adjust your desired

setting(s)

a. Timer: Press the or button to adjust the time from

1–30 minutes. The default time is 10 minutes. See DETERMINING

TREATMENT FREQUENCY AND DURATION on the next page.

b. Mode: Press the or button to toggle between the four modes,

RED (630 nm + 830 nm), BLUE (415 nm), NIR (830 nm), and

PINK (630 nm + 415 nm). RED mode is selected by default. See

CHOOSING A COLOR THERAPY MODE on the next page.

c. Level: Press the or button to adjust the brightness intensity

level from 1–100% in increments of 1%. 100% is selected by default.

d. Pulse: Press the or button to adjust the pulse frequency from

1–10 Hz in increments of 1 Hz.“Null” (pulsed-light therapy off) is

selected by default. :

8. Press and hold the On/Off button for three seconds to stop the session

at any time. The RevitaGlow Pro will shut down automatically when the

set treatment time completes. Press and hold the On/Off button again

if you wish to begin another session.

9. Always power off the RevitaGlow Pro after each use.

REPLACING THE EYE PROTECTORS IN THE FACE MASK

If you ever need to replace the silicone eye protectors:

1. Locate the replacement pair of eye protectors.

2. With the face mask LEDs facing towards you, pull each eye protector

ﬁrmly to remove it.

3. Insert the replacement eye protectors into the eye slots. The raised,

curved edges of the eye protectors will be on the inside of the mask.

DETERMINING TREATMENT FREQUENCY AND DURATION

ISSUE/

SEVERITY ACUTE CHRONIC MAINTENANCE

Frequency

(How Often) 1–2 times daily 1–2 times daily 3–4 times weekly

Duration

(How Long) 20–25 minutes 15–20 minutes 15–20 minutes

NOTE: Do not use for more than 30 minutes per day.

16 RevitaGlow Pro User Manual Lifepro Wellness Recovery Collection 17

TIPS FOR USING THE REVITAGLOWPRO

• Thoroughly wash and dry your face, neck, and upper-chest before using.

• We strongly recommend discontinuing any Retin-A use at least 5 days

before using the RevitaGlow Pro.

• Do not wear jewelry or accessories under the RevitaGlow Pro mask.

• Lie down on a ﬂat comfortable surface, such as a bed or couch during

treatment. We recommend spending the treatment time practicing

blissful, uninterrupted relaxation and self-care, such as listening to

music or meditating.

• Place the RevitaGlow Pro in position on your face before turning it on.

• Ensure the RevitaGlow Pro is properly positioned on your face so that

eye protectors are positioned comfortably around your eyes to prevent

light exposure to your eyes.

• Check the treatment area frequently and stop immediately at the ﬁrst

sign of pain or discomfort.

• We recommend 15–20-minute treatment sessions, 3–4 times a week.

• We do not recommend using for more than 30 minutes per day.

• People with sensitive skin or skin conditions that can be exacerbated by

heat, such as eczema and rosacea, may want to use the device only for

short durations.

• Optionally, you may apply a light, soothing moisturizer before using.

CAUTION

• Do not look directly into the LEDs, as this may result in damage to the

eyes.

• Do not use this product in combination with ointments, salves, liniments,

balms, or other topical pain-relievers that contain ingredients that

produce heat (such as capsaicin), as this may result in burns.

• Do not use sheet masks or harsh products such as acids, acne

treatments, or retinols under the RevitaGlow Pro.

• Do not wear metal jewelry, such as lip rings, nose rings, necklaces, or

accessories in the treatment area, as metal may heat and cause burns.

• Do not use directly on swollen or inﬂamed skin or open wounds.

• Keep out of reach of children and pets.

CHOOSING A COLOR THERAPY MODE

The RevitaGlow Pro has four color therapy mode options:

MODE WAVELENGTH BENEFITS

RED 630 nm

Anti-aging beneﬁts include boosting collagen

and elastin production. Improves blood ﬂow.

Reduces the appearance of ﬁne lines and

wrinkles. Reduces symptoms of eczema,

psoriasis, and rosacea including, redness,

itching, ﬂaking, and swelling.

BLUE 415 nm

Has anti-bacterial beneﬁts and reduces

inﬂammation. Treat mild to moderate acne

by eliminating the bacteria that cause acne,

regulating over-active oil/sebum glands,

and reducing the appearance of acne scars.

Reduces pigmentation and sun damage.

Reduces skin scaling from psoriasis.

NEAR-

INFRARED 830 nm

Targets deep ﬁbroblast cells, stimulating

collagen and elastin production, resulting in

plumper, ﬁrmer, more youthful-looking skin.

PINK 630 nm + 415 nm Provides the combined beneﬁts of red and blue

light.

WHAT IS PULSED-LIGHT THERAPY?

Pulsed-light therapy is phototherapy that uses rapid pulses of light to produce improved

results. Emerging research shows that the short pause between light pulses encourages

cells to regenerate more efﬁciently, meaning pulsed light has a greater effect on cell

regeneration and recovery.

Frequency is a measure of the pause between one “on” time and the next. For example,

if a frequency of 10 Hz is selected, the LEDs will pulse on and off 10 times per second.

By default, the RejuvaGrow uses continuous waves of light (the pulse is set to “Null” or

off). When the pulse frequency is turned on, the device LEDs will turn on and off rapidly

at the set frequency (Hz).

When the RevitaGlow Pro is powered on, press the Settings button to toggle to Pulse

and use the or button to set the frequency from 1-10 Hz. The LED lights will emit

rapid pulses of light.

18 RevitaGlow Pro User Manual Lifepro Wellness Recovery Collection 19

FREQUENTLY ASKED QUESTIONS

Q: WHAT IS LIGHT THERAPY

A: Light therapy, also called phototherapy, is a highly-effective non-invasive,

chemical-free therapy that can be used to safely and painlessly heal and

rejuvenate many parts of the body.

Light therapy uses speciﬁc wavelengths, or colors of light to treat the skin, both

at and below the surface. Different wavelengths of light have different treatment

applications and beneﬁts.

Q: WHAT ARE THE BENEFITS OF LIGHT THERAPY

A: The beneﬁts of light therapy vary greatly depending on the wavelength of light

used. The beneﬁts of light therapy include: