Lifestyle Solutions PROVIDENCE User manual

Box # 1 Box # 3
2 pcs. Bed side rails
1 pcs. Slat Support
4 pcs Support Leg
1 pc. Head Board
Parts And Fittings Packing Detail
Parts (Slats Box)
- 13 pcs Slats
1 pc. Foot Board
Box # 2
32mm Screw - 26pcs.
(Wrapped in separate plastic bag)
Slat Hardware
Bolts M6 x 70mm - 4pcs.
Washer - 8 pcs.
Hardware Pack In Box #1
5mm Allen Key 1 pc.
Bolt
M8 x 25mm - 8 pcs
Spring Washer
- 8 pcs
4mm Allen Key 1 pc.
PROVIDENCE BED
Bed Assembly Instructions
Page 1 of 2
A complete assembled view of
a Conventional Bed
The Fusion Of Function And Comfort With Style

Step 1/Diagram 1
Step 2/Diagram 2
Spread out all the slats on to the slat support.
Step 3/Diagram 3
Finally, place both ends of the
assembled slats in the bed frame
resting on both sides of the
side rails and screw them in
place with the 32mm screws
provided as shown in diagram 3.
Fix both side rails to the Head Board and Foot Board
as shown in diagram 1 with the 25mm bolts, spring
washers and washers.
Further secure the pre-drilled slats to the
slats support and support legs with 4nos
M6 x 70mm bolt as shown in diagram 2.
Bed Assembly Instructions
PROVIDENCE BED
Page 2 of 2
Fasten screws to all slats
on side rail
Screw
Diagram 3
Diagram 1
Side Rail
Slat
M6 x 70mm JCBC
Diagram 2
Center Slat
Support
Leg Support
M6x70mm
Bolts
Leveler
Pre-drilled
Slat
M4 Allen
key
Diagram 1
The Fusion Of Function And Comfort With Style
Head Board
Washer
M5 Allen Key
Side Rail Metal Bracket
M8 x 25mm
Bolt
Threaded Hole
Spring Washer

370V/380P Casegood
Fixing of Drawer Knobs . Step #1
Remove Drawer Knobs as shown
Step #2
Refix Knobs on outside as shown.
Bolt
Drawer Knobs
The Drawer Handles are fixed inside the Drawers to reduce
transportation related damages.
You'll need to remove and fix it onto the correct orientation.
*For illustration purposes only.
LIFESTYLE SOLUTIONS
The Fusion Of Function And Comfort With Style
R

370V / 380P 6 Drawer Dresser
Removing of Center Leg
The center leg is added for additional support.
You may remove it if you wish. The following
steps will assist you in doing this.
First, turn the Dresser upside down as shown on a clean smooth
surface to avoide any scratches
6 Drawer Dresser
Remove the JCBC bolt from the cleat as shown by using
the Allen key provided. Then slide the support leg in the
direction shown above.
STEP 2
Plastic Wrapper
STEP 1
Center Leg
Allen Key
JCBC Bolt
slide
direction
The Fusion Of Function And Comfort With Style
LIFESTYLE SOLUTIONS
Allen Key Attached

370V/380P Mirror Frame
Assembly Instructions
Parts
Hardwares
Fixing Mirror Frame onto the Dresser (METHOD A) (METHOD B)
Note : Mirror can either be attached to the dresser (Method A) or
hang on the wall (Method B).
*For illustration purposes only.
Wood Screw - 8 pcs.
Mirror Frame
Mirror Brace
Mirror Frame
Wood Screw
Dresser
Mirror Brace
Sticker showing this side up
Please remove the hooks that are attached on the
mirror if you want to change the hanging position
from potrait to landscape.To change hook position,
use predrilled holes as shown below.
Use Philips screw driver
to remove hook and
reattach accordingly.
Fig. 1 : Potrait Position Fig. 2 : Landscape Position
Mirror Brace is packed in
the 6 Drawer Dresser box
The Fusion Of Function And Comfort With Style
LIFESTYLE SOLUTIONS
Hook
Predrill Hole
Sticker showing
this side up
*Not Included

370V / 380P 4 Drawer Media Console
Removing of Center Leg
The center leg is added for additional support.
You may remove it if you wish. The following
steps will assist you in doing this.
First, turn the Dresser upside down as shown on a clean smooth
surface to avoide any scratches
Remove the JCBC bolt from the cleat as shown by using
the Allen key provided. Then slide the support leg in the
direction shown above.
STEP 2
Plastic Wrapper
STEP 1
Center Leg
Allen Key
JCBC Bolt
slide
direction
The Fusion Of Function And Comfort With Style
LIFESTYLE SOLUTIONS
Allen Key Attached