Lifestyle Solutions BORDEAUX User manual

TOLL FREE 1-877-693-8866 LIFESTYLE SOLUTIONS
BORDEAUX
4 of 4 Rev.062315
As shown below, align part 3 predrill holes to both sides of headboard. Use hardware
B, D and E to start assembly step. Please hand tight 4 pieces of hardware B before you
use hardware A to complete your assembly step.
4
3
A
B
E
D
Finally, stretch and pull down rear cover evenly before securing velcro
strip to seat base. Repeat if necessary for better fit.
Right now your headboard is ready for assembling with bed base frame using
spare hardwares.5
Headboard
Bed Base Frame cA
F
D
G
D
E
H

ASSEMBLY INSTRUCTIONS
At least two adults are required to safely complete performing this task.
Other lifting attempts may risk back injury due to large and heavy part(s).
ASSEMBLY INSTRUCTIONS
Caution:At least two adults are required to safely complete performing this task.
Other lifting attempts may risk back injury due to large and heavy part(s).
2 of 4 3 of 4
Part 3
1 Pair
Part 1
1 x
Part 2
1 x
NOTE: The headboard comes in 3 parts as shown in diagram on page 2 of 4.
PARTS AND HARDWARE
Caution: Please avoid using sharp objects such as a knife to cut open the packaging as you may accidentally
damage the upholstery.
Carefully place headboard part 1 and 2 on a clean flat surface with rear side facing
up and then open part 1 and 2 compartment covers. Align part 1 and 2 assembly
holes.As below image shown use hardware C, D and E to start assembly step.
Please hand tight all 8 pieces of hardware C before you use hardware A to complete
your assembly step 1.
A
C
E
D
5/16” X 1.38”
Bolt(B)
4x
M5
Allen Key(A)
1x
5/16” X 4”
Bolt(C)
12x
5/16” x Ф0.75”
Plastic Washer(G)
4x
5/16” x Ф0.75”
Washer(D)
20x
5/16”
Spring Washer(E)
16x
5/16”
Nut(H)
4x
13mm
Mini Spanner(F)
x1
2Insert both part 3 metal plates to both sides of assembled unit as shown below. Ensure it is
correctly in place.