Lifetime STREAMLINE 90114 User manual

1
Keep this Product ID Number and use when contacting Customer Service:
OWNER’S MANUAL
MODEL N° 90114
COPY

2
INSTRUCTION #1071130 D 11/5/2010
Save this owner’s manual for future reference and in the event that
the manufacturer has to be contacted.
**U.S. and Canada customers ONLY**
IF ASSISTANCE IS NEEDED,
DO NOT CONTACT THE STORE!
CALL OUR CUSTOMER SERVICE DEPARTMENT at
1 [phone]
HOURS: 7:00 a.m. to 5:00 p.m. Monday through Friday (Mountain Standard Time)
**Call us or visit our Web site for Saturday hours**
Lifetime Products, Inc.
0/"OXs&REEPORT#ENTER"LDG$#LEARFIELD5TAH
**For customers outside the U.S. or Canada, please contact the store for assistance.**
REGISTER YOUR LIFETIME PRODUCT TODAY!
,)&%4)-%302/-)3%4/9/5
We invite you to read our privacy policy at www.lifetime.com
2%')34%2TODAY
4HEREAREBENElTSTOREGISTERINGYOUR,IFETIMEPRODUCT7ITHOURNEWONLINEPRODUCTREGISTRATIONFORM
ITSFASTANDEASY2EGISTERWITHUSATWWWLIFETIMECOMANDENJOYTHESEGREATBENElTS
s2ECEIVEEXCLUSIVEMONEYSAVINGOFFERSFROM"UY,IFETIMECOMOURONLINESTOREASWELL
as NEW product notifications and special closeout promotions!
s)NTHEUNLIKELYEVENTOFAPRODUCTRECALLORSAFETYMODIlCATIONWEWILLNOTIFYYOU
s2EGISTERINGYOURPRODUCTGUARANTEESYOUWARRANTYSERVICE)FYOUDONOTREGISTERYOUR
product, your warranty rights will not be diminished. But you will need to provide a sales
receipt to verify your product purchase date before warranty service will be provided.
Maintaining your privacy is our long-standing policy at Lifetime. And you can rest as-
sured that Lifetime will not sell or provide your personal data to other third parties, or
allow them to use your personal data for their own purposes.
COPY

3
Most injuries are caused by misuse and/or not following instructions. Use caution when using this product.
To ensure safety, do not attempt to assemble this product without reading and
following all instructions carefully. Check the entire box and inside all packing
materials for parts and/or additional instruction material. Before beginning assembly,
identify and inventory all parts and hardware using the parts and hardware lists and
identifiers in this document. Proper and complete assembly, use and supervision
are essential for proper orientation and to reduce the risk of accident or injury. A
high probability of serious injury exists if this product is not installed, maintained,
and/or operated properly. Failure to comply with any of the warnings in this
instruction manual may result in serious personal injuries such as cuts, broken
bones, nerve damage, paralysis, brain injury, or death. Failure to comply may also
result in property damage. Please heed all warnings and cautions.
&!),52%4/&/,,/74(%3%7!2.).'3-!92%35,4).3%2)/53).*529/202/0%249
$!-!'%!.$7),,6/)$7!22!.49
s)FUSINGALADDERDURINGASSEMBLYUSEEXTREMECAUTION
s4WOCAPABLEADULTSARERECOMMENDEDFORTHISOPERATION
s#HECKBASEDAILYFORLEAKAGE,EAKSMAYCAUSEPRODUCTTOFALL
s!SSEMBLETHEPOLESECTIONSPROPERLY&AILURETODOSOCOULDCAUSETHEPOLE
sections to separate during play or transport.
SAFETY INSTRUCTIONS
BEFORE BEGINNING ASSEMBLY
Keep the hardware bags and their contents separate. If any parts
are missing, call our Customer Service Department.
Identify and inventory all parts and hardware using the parts and
hardware lists and identifiers in this document.
Test fit all Bolts by inserting them into their respective holes. If
necessary, carefully scrape away any excess powder coating
buildup from inside the holes. Do not scrape away all of the
powder coating. Bare metal may rust. You may need to pound
some Bolts into place with a hammer or mallet.

4
TOOLS AND PARTS REQUIRED FOR THIS ASSEMBLY
*Two adults required to
complete assembly*
/NLYADULTSSHOULDSETUPTHEPRODUCT$ONOTALLOWCHILDREN
INTHESETUPAREAUNTILASSEMBLYISCOMPLETE
!DJUSTABLE7RENCH Phillips Screwdriver
(1)
&UNNEL
(1)
3CRAP7OOD
(1)
Sand
(150 lb)
Rubber Mallet
(1)
7ATER(OSE
(1)
(2)
v3OCKET7RENCH
(1)

5
This area is located at the top,
left-hand corner of the page
and indicates which tools
and hardware are needed to
COMPLETETHEASSEMBLYSTEPS
on a page.
Note:
!
Refer to the following areas throughout the instructions
to assist in the assembly process:
4HISAREAISUSUALLYLOCATEDINTHE
bottom, left-hand corner of a step
and indicates that special attention
is needed to perform a particular
part of a step.
4HESEAREASAREUSUALLYLOCATEDIN
the bottom, right-hand corner of a
step and indicate that damage to
THEPRODUCTORSERIOUSINJURYMAY
occur if the caution or warning is
not heeded. 7!2.).'
ASSEMBLY GUIDES
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
CAUTION

6
PARTS LIST
ID Item Description Qty
!,( Top Pole 1
!,& Middle Pole 1
!,% Bottom Pole 1
BFN Adjustment Knob 1
BFQ Pole Plug 1
AJI Backboard 1
BFM Backboard Brace 2
!,8 Rim 1
AKZ Net 1
AJM Base 1
!,) Upper Pole Brace 2
!,+ Right Bottom Pole Brace 1
!,* ,EFT"OTTOM0OLE"RACE 1
BDB Cross Tube 1
BFO Right Foot 1
BFP ,EFT&OOT 1
AMU Wheel 2
AMT Warning Sticker (Applied to Middle Pole) 1
HARDWARE LIST
ID Item Description Qty
Streamline Hardware
APN v&LANGE,OCK.UT 1
APG 5/16” x 3 1/4” Hex Bolt 2
AOT 5/16” x 3 3/8” Hex Bolt 1
APP 5/16” x 4” Carriage Bolt 1
AAY 1/2” Nylock Jam Nut 1
AOR 1/2” Washer 1
AOS 1/2” x 6 1/4” Cap Screw 1
BFR 1/2” x 5 1/2” Axle 2
AAO 5/16” Nylock Nut 7
AOO 5/16” x 2” Hex Tap Bolt 2
AZY Base Plug 2
APO 5/16” x 4 1/2” Carriage Bolt 1
APJ 5/16” x 3/4” Hex Bolt 2
COC 5/16” x 5/8” Screw for Plastic 2
!/, 5/16” x 3 1/4” Carriage Bolt 2
AOM 5/16” Cap Nut 2
ABD 5/16” Washer 15
AOP M6 x 35 Phillips Pan Head Screw 2
AON M6 x 1 Nylock Cap Nut 2
ADS 1/4” x 3/4” Screw 1
AOQ 3/8” Allen Wrench 1

7
Parts shown at 10% of Actual Size
ALH (x1)
Top Pole
!,& (x1)
Middle Pole
ALE (x1)
Bottom Pole
PARTS IDENTIFIER
43”
43”
43”
41”
ALI (x2)
Upper Pole Brace
ALK (x1)
Right Bottom Pole Brace
!,* (x1)
,EFT"OTTOM0OLE"RACE
BDB (x1)
Cross Tube
7ARNING3TICKER
*Do not remove Top Pole from Middle Pole until instructed
18 ”
1/2
"&- (x2)
Backboard Brace

8
!*) (x1)
Backboard
!*- (x1)
Base
Parts shown at 5% of Actual Size
Parts shown at 10% of Actual Size
PARTS IDENTIFIER
Parts shown at 25%Actual Size
"&0 (x1)
,EFT&OOT
"&/ (x1)
Right Foot
AMU (x2)
Wheel
"&. (x1)
Adjustment Knob
"&1 (x1)
Pole Plug
ALX (x1)
Rim
AKZ (x1)
Net

9
HARDWARE IDENTIFIER
342%!-,).%(!2$7!2%
Hardware shown at Actual Size
APN (x1)
5/16” Flange
,OCK.UT
!0' (x2)
5/16” x 3 1/4” Hex Bolt
APP (x1)
5/16” x 4” Carriage Bolt
AAY (x1)
1/2” Nylock
Jam Nut
AOR (x1)
1/2” Washer
AOS (x1)
1/2” x 6 1/4” Cap Screw
AAO (x7)
5/16” Nylock Nut
AOO (x2)
5/16” x 2” Hex Tap Bolt
AZY (x2)
Base Plug
APO (x1)
5/16” x 4 1/2” Carriage Bolt
6 1/4”
(Not actual length)
AOT (x2)
5/16” x 3 3/8” Hex Bolt

10
HARDWARE IDENTIFIER
!0* (x2)
5/16” x 3/4” Hex Bolt
342%!-,).%(!2$7!2%#/.4).5%$
Hardware shown at Actual Size
COC (x2)
5/16” x 5/8” Screw for Plastic
AOL (x2)
5/16” x 3 1/4” Carriage Bolt AOM (x2)
5/16” Cap Nut
ABD (x15)
5/16” Washer
!/1 (x1)
3/8” Allen Wrench
AOP (x2)
M6 x 35 Phillips Pan Head Screw AON (x2)
M6 x 1 Nylock
Cap Nut
ADS (x1)
1/4” x 3/4” Screw
"&2 (x2)
1/2” x 5 1/2” Axle
5 1/2”
(Not actual length)