5
PC3.300 User Guide
P3:
1. Peak - from any mode, hold down button, release button from any mode
and flashlight turns off.
2. Standard – single click.
3. Low Light – double click.
Click once from any mode to turn flashlight off.
B. Charging the PC3.300
The recharging of the flashlight is a simple process of inserting the flashlight
into the charging unit until it “snaps” into place. The blue LED indicator light
on top of the charging unit will display the recharge cycle performance.
Unlike conventional flashlights, the Light for Life is designed to be stored in
the charger when not in use, and in no way shortens or negatively affects its
run-time or use.
For optimum performance of your Light For Life flashlight, please:
• Charge the PC3.300 flashlight for 24 hours before routine use.
• Store the PC3.300 flashlight on the charger when not in use.”
The flashlight can be used immediately out of the box using the standard
90-second charge. Once the 24 hour charge cycle is complete, the flashlight
will continue to recharge in only 90 seconds. The light is designed to be
placed on the charger and stored, while plugged-in, indefinitely with no
performance degradation. In fact, leaving the light stored on its charger will
help maintain its maximum performance.In addition, the charging unit uses
very little power once it has completed its charge cycle and the blue light
stops flashing.
“The low power consumption of the charger will NOT drain your car’s battery
when leaving the flashlight stored in the charger and connected through the
DC plug.”
ENGLISH
TAC5382_PC3300_userGuide_510.indd 5 5/10/10 4:38 PM
