Lightware UBEX-PRO20-HDMI-F100 User manual
UBEX-PRO20-HDMI-F100
UBEX-PRO20-HDMI-F110
UBEX-PRO20-HDMI-R100 2xMM-2xDUO
UBEX-PRO20-HDMI-R100 2xMM-QUAD
UBEX-PRO20-HDMI-R100 2xSM-2xDUO
UBEX-PRO20-HDMI-R100 2xSM-QUAD
UBEX-PRO20-HDMI-R100 2xSM-BiDi-DUO
AV Over IP Multimedia Extender
v2.1 18-06-2021
series – Extender Application Mode – User's Manual 2
This equipment must be used with a mains power system with a
protective earth connection. The third (earth) pin is a safety feature,
do not bypass or disable it. The equipment should be operated only
from the power source indicated on the product.
To disconnect the equipment safely from power, remove the power
cord from the rear of the equipment, or from the power source. The
MAINS plug is used as the disconnect device, the disconnect device
shall remain readily operable.
There are no user-serviceable parts inside of the unit. Removal of the
cover will expose dangerous voltages. To avoid personal injury, do not
remove the cover. Do not operate the unit without the cover installed.
The appliance must be safely connected to multimedia systems.
Follow instructions described in this manual.
For the correct ventilation and to avoid overheating ensure enough
free space around the appliance. Do not cover the appliance, let the
ventilation holes free and never block or bypass the ventilators (if any).
To prevent injury, the apparatus is recommended to securely attach to
The apparatus shall not be exposed to dripping or splashing and that
be placed on the apparatus.
CAUTION AVIS
RISK OF ELECTRIC SHOCK
DO NOT OPEN
RISQUE DE CHOC ELECTRIQUE
NE PAS OUVRIR
WEEE
This marking shown on the product or its literature,
indicates that it should not be disposed with other
household wastes at the end of its working life. To
prevent possible harm to the environment or human
health from uncontrolled waste disposal, please
separate this from other types of wastes and recycle it
responsibly to promote the sustainable reuse of material
resources. Household users should contact either the
retailer where they purchased this product, or their local government
environmentally safe recycling. Business users should contact their
supplier and check the terms and conditions of the purchase contract.
This product should not be mixed with other commercial wastes for
disposal.
CLASS 1
LASER PRODUCT
Alternating current
Protective conductor terminal
Caution, possibility of electric shock
Caution
Laser radiation
series – Extender Application Mode – User's Manual 3
The following symbols and markings are used in the document:
Useful information to perform a successful procedure;
it is recommended to read.
INFO:A notice which may contain additional information. Procedure
can be successful without reading it.
DEFINITION:The short description of a feature or a function.
TIPS AND TRICKS:Ideas which you may have not known yet but
can be useful.
Go back to the previous page. If you clicked on a link previously,
you can go back to the source page by clicking the button.
Navigate to the Table of Contents.
Step back one page.
Step forward to the next page.
All presented functions refer to the indicated products. The
descriptions have been made during testing these functions in
environment:
Item
Lightware Device Controller (LDC) software 2.5.9b3
Lightware Device Updater V2 (LDU2) software 2.10.0b6
Firmware package
UBEX-PRO20-HDMI-F100 2.0.0
UBEX-PRO20-HDMI-F110 2.0.0
UBEX-PRO20-HDMI-R100 series 2.0.0
Hardware
UBEX-PRO20-HDMI-F100 1.2
UBEX-PRO20-HDMI-F110 1.3
UBEX-PRO20-HDMI-R100 series 1.3
Document revision:
Release date:
Editor: Tamas Forgacs
Lightware Visual Engineering supports green technologies and
eco-friend mentality. Thus, this document is made for digital usage
primarily. If you need to print out few pages for any reason, follow the
recommended printing settings:
▪Page size: A4
▪Output size: Fit to page or Match page size
▪Orientation: Landscape
TIPS AND TRICKS:Thanks to the size of the original page, a border
around the content (grey on the second picture below) makes
possible to organize the pages better. After punching the printed
pages, they can be placed easily into a ring folder.
123
series – Extender Application Mode – User's Manual 4
The side and bottom color of the pages indicates the related application
mode of the device. See the difference in the Application Modes section.
This document is about the Extender application mode only. The user's
manual of the UBEX Matrix mode can be downloaded from the
following link:
Sample page for Extender mode
Sample page for Matrix mode
The UBEX F-series endpoint devices can be ordered with various
colored front panel but the transmitter is always red, the receiver is
always yellow, and the transceiver is always white in this manual for the
sake of simplicity.
Transmitter (TX) Receiver (RX) Transceiver (TRX)
For the available colors of the front panel please contact
This user's manual contains keywords with hashtag (#) to help you to
The format of the keywords is the following:
#<keyword>
The usage of the keywords: use the Search
of your PDF reader application, type the #(hashtag) character and the
wished keyword.
The #new
#dhcp
This keyword is placed at the DHCP (dynamic IP address) setting in
the front panel operation, the Lightware Device Controller (LDC) and
the LW3 programmer's reference section.
See the list of all hashtag keywords of the document in the Hashtag
Keyword List section, and it is highlighted with claret in the table of
contents of the document.
An assorted link collection can be found at the end of this user's
manual. The Quick Link Collection
your current activity. The collection is grouped by topic category and
within that is in alphabetical order.
The section of the quick link collection is highlighted with claret in the
table of contents of the document.
Sample page of the Quick Link Collection
series – Extender Application Mode – User's Manual 5
9
................................................... 10
................................................... 11
............................................................... 14
......................................................... 15
....................................................................................... 17
........................................................................................ 18
....................................................................................... 19
........................................................................................ 20
............................................................................ 23
....................................................... 23
....................................................................... 23
..................................................................... 24
.................................................................. 24
.................................................................. 25
..................................................................... 25
.................................................................. 25
..................................................................... 26
...................................................................... 26
..................................................................... 27
.................................................................. 27
................................................................ 27
..................................................................... 28
................................................................................................. 28
.............................................................................................. 28
................................................................................................. 28
........................................................................................... 29
.............................................................................. 29
........................................................................... 29
...................................................................................... 29
............................................................................. 29
................................................................................. 29
............................................................................... 29
...................................................................... 31
...................................................................... 31
............................................................................... 32
............................................................ 32
............................................................................ 34
.................................................................... 34
............................................................................. 34
.............................. 34
........................................................................... 34
....................................................................... 35
.................................................... 35
................................................................................... 36
........................ 37
............................. 38
........................ 39
....................... 40
............................ 41
....................... 42
........................................................ 43
............................................................. 43
............................................. 43
............. 43
........ 44
. 44
.................................................. 44
................................................ 45
................................... 45
.................................................................... 46
...................................................... 46
..................... 46
................................................................. 47
......................................................... 47
................................................................... 48
.............................................................. 48
............................... 49
................................................................... 49
................................... 50
........................................................................... 52
................................................................................ 53
........................................................................... 54
................... 55
.............. 56
................................................................................. 57
..................................................................... 58
........ 58
........ 59
........................................ 59
............................................. 59
........................................ 60
.................................................... 61
......................................................... 61
.................................................... 62
.................. 63
.............. 64
.................................................................... 66
series – Extender Application Mode – User's Manual 6
....................................... 66
.................................................................... 66
....................................... 67
.................. 67
........................................................ 68
............................................................... 72
......................................................... 73
......................................................................................... 73
............................................... 74
.................................. 74
.............................................. 75
................................................. 75
................................. 76
..................................................... 76
................................ 77
......................................................... 77
............................................... 78
.......................................... 78
...................................... 79
................................................................... 79
................................................ 80
............................................... 80
................................................................. 82
.............................................................. 82
............................................................................. 83
............................................................................... 83
...................................................... 84
.............................................................................. 85
............................................................................... 85
........................................... 86
................................................................. 86
.................................................................................. 87
.................................................................................... 87
........................................................................................ 88
..................................................................................... 89
.................................................................................. 89
............................................................................. 90
................................................................................... 90
.......................................................... 91
................................... 91
.................................. 91
........... 94
.................................................................................. 94
............................................................................. 95
.............................................................................. 95
............................................................................... 95
.......................................................................................... 95
......................................................................................... 96
.................................................................................... 96
..................... 96
............................................. 96
....................................................................... 97
.......................................................... 97
........................................... 97
................................................... 97
................................................. 97
.......................................................................... 98
.......................................................................... 98
................................................................ 98
............................................................. 98
............................................................... 99
........................................................ 99
......................................................... 99
....................100
................................. 100
................................................................................ 100
.............................................................. 100
................................................................. 101
........................................ 101
.................................................. 101
..........................................102
............................................102
...................................................................103
.......................................103
..........................................................103
............................................................................. 103
........................................................................ 103
.............................................................. 104
.................................................104
.................................................. 104
................................................................... 104
.............................................................. 105
.......................................................... 105
....................................................... 105
.................................................. 106
..........................................107
............................................107
...................................................................107
.......................................107
..........................................................107
.............................................................. 108
............................................... 108
........................................................................ 108
.................................................108
.................................................. 109
................................................................... 109
.............................................................. 109
.................................................................. 109
series – Extender Application Mode – User's Manual 7
.................................................................. 109
................................................................. 110
........................................110
........................... 110
.......................................................... 110
....................................................... 111
........................................................................... 111
.................................................112
...................................................................112
.................................................. 112
..........................................113
..........................................................113
................................................114
..........................................114
.......................................114
............................................... 114
........................................................................ 115
...................................................115
.................................................. 115
................................................................... 115
.............................................................. 116
.................................................................. 116
.................................................................. 116
................................................................. 116
........................................117
........................... 117
.......................................................... 117
....................................................... 117
.................................................118
...................................................................118
.................................................. 118
..........................................119
............................................119
...............................................................120
.......................................120
...............................................120
.............................................................. 120
..................................................... 120
...................................................................... 120
............................................................................ 121
............................. 121
...........................................121
....................................................121
.............................................122
..........................122
.................................................................122
..........................................122
..........................................122
................................123
...........................................123
........................................................................ 123
..............................................................123
................................................................ 123
............................. 124
....................................................124
..................................... 124
......................................................... 124
.......................................124
........................125
.......................................... 125
..................................................125
........................................125
...................................................125
................................................................ 125
............................................................. 125
............................................................. 126
..................................................................126
.................................................126
.............................................................. 126
.............................................126
......................................................126
......................................126
........................................................... 126
....................... 127
................................................127
......................................................................127
.............................................................................. 127
.......................................................................... 128
.......................................................................... 128
....................................... 128
............................................................. 128
........................................................ 128
............................... 129
................................129
........................... 129
.........129
.................. 129
...........130
.............. 130
................................................................... 137
..............................................137
...................... 137
............................................................. 147
.................................................... 147
.........................................148
...............................................148
................................................................................... 149
.......................................................................................... 151
.......................................................................... 151
series – Extender Application Mode – User's Manual 8
......................................................... 151
...............................................151
.....................................................................153
.....................................153
........................................................... 159
........................................................... 160
...............................................162
...................................................................... 164
....................................................................... 164
.............. 164
................... 164
.............. 165
.......................... 165
............................... 165
..........................166
............................. 166
.................................... 167
........................................................... 168
.............. 169
................... 169
.............. 170
.......................... 170
............................... 171
..........................171
............................................................................. 172
............................................................................. 174
...............................................177
...............................................178
............................................................................... 180
............................................................................... 180
1. Introduction series – Extender Application Mode – User's Manual 9
1. Introduction series – Extender Application Mode – User's Manual 9
EXTENDER APPLICATION MODE
1
Introduction
ç
ç
ç
ç
ç
ç
ç
1. Introduction series – Extender Application Mode – User's Manual 10
1. Introduction series – Extender Application Mode – User's Manual 10
EXTENDER APPLICATION MODE
Lightware’s one of the most visionary development project is
the UBEX (Ultra Bandwidth Extender) product family. UBEX
uncompressed 4K UHD@60Hz 4:4:4 signal extension with latency-free multistreaming, designed to use in
a 10G Ethernet network. UBEX operates with zero frame latency, provides seamless switching and lossless
reproduction of source signals of up to 4K60Hz 4:4:4, without artifacts. Uncompressed 4K60Hz 4:4:4 data
transmission, or visually lossless compression at higher data rates.
transfer two video signals over a single 10G link with minimal compression, which requires half the router
transfer 4K@60Hz 4:4:4 over two links uncompressed. The maximum reachable distance is ranging between
400 m and 80 km, depending on the type of singlemode or multimode SFP+ optical modules installed in the
device. The UBEX design also favors dual-screen applicationsas a single UBEX device can handle 2x HDMI
The Video Wall Wizard for UBEX features quick video wall installation with bezel adjustment and cropping,
includes options for various layouts within the video wall matrix and also allows zones for smart management.
of dynamic, Rental&Staging type of applications. The devices shares the features of the standard
UBEX–PRO20–HDMI–F100 model, with additional features and changes in build and dimensions.
reliability.
UBEX-PRO20-HDMI-F110
Ultra Bandwidth Extender HDMI interface Model number
20 Gbit/s signal transmission
Fiber (SFP+) interface
ProLine product category
UBEX-PRO20-HDMI-R100 2xMM-QUAD
Ultra
Bandwidth
Extender
Neutrik
opticalCON
QUAD connector
HDMI interface Model number
20 Gbit/s signal transmission
R-series model 2x10G multimode
fiber optical
interface
ProLine product
category
Lightware devices contain a label indicating the unique serial number of the product. The structure is the
following:
* For UBEX-PRO20-HDMI-F110 model.
INFO:
7A000941
7=2017
8=2018
9=2019
A=2020
B=2021
C=2022
D=2023
E=2024
F=2025
6-digit running sequence number
Month of the manufacturing:
Year of the manufacturing:
(3-9, A-Y)
1: Jan
2: Feb
3: Mar
4: Apr
5: May
6: Jun
7: Jul
8: Aug
9: Sep
A: Oct
B: Nov
C: Dec
UBEX F series
endpoint device
IEC power cable UTP patch cable (3 m)
Safety and
Warranty
Info
Quick
Start
Guide
Safety & warranty info,
Quick Start Guide
Phoenix Combicon
3-pole connector *
Phoenix Combicon
5-pole connector *
1. Introduction series – Extender Application Mode – User's Manual 11
1. Introduction series – Extender Application Mode – User's Manual 11
EXTENDER APPLICATION MODE
The following items can be purchased optionally for the indicated device.
UBEX R-series
endpoint device
Power cable with
Neutrik powerCON
connector
UTP patch cable (3 m) Safety & warranty info,
Quick Start Guide
Safety and
Warranty
Info
Quick
Start
Guide
1U high rack shelf Mounting bracket V2
Rack ears for
mounting (2x) with
M4x8 screws (4x)
Up to HDMI 2.0 4K 2160p@60Hz 4:4:4 video input or 4096x2160@60Hz resolution over a
20 Gigabit network with extra low latency.
The UBEX system is Ethernet based, using 10 GbE, IGMPv2, and IPv4 protocols.
Each output has a clean, jitter free signal, eliminating signal instability and distortion caused by
Video scaling is the process of changing the size of a video frame in order to match the native
resolution of a display sink. It involves converting the resolution to a higher or lower format and
also a change in aspect ratio; typically from 4:3 to 16:9.
2.2
The UBEX extenders complies to the HDCP 2.2 standard. HDCP capability on the digital video
inputs can be disabled when non-protected content is extended.
The exact video and audio signal format can be determined such as timing, frequencies, scan
mode, HDCP encryption, color range, color space and audio sample rate.
step by the user anytime.
Frame rate conversion is available for the UBEX endpoints in transmitter, receiver, and
transceiver operation modes either. The most frequently used refresh rates can be forced on
both inputs or outputs.
UBEX series extenders provide seamless switching (clean cut) technology which is the
capability to deliver consistent performance and reliability. The advantage of the technology is
that various environments with different video sources and displays will not impact signal loss.
1. Introduction series – Extender Application Mode – User's Manual 12
1. Introduction series – Extender Application Mode – User's Manual 12
EXTENDER APPLICATION MODE
UBEX endpoint devices are able to simultaneously transmit two video streams with embedded
audio via the SFP+ interface.
Stream Copy
UBEX endpoint devices are able to copy the stream of the HDMI out 1 to the HDMI out 2 port.
This is the COPY function. The function is available in receiver and transceiver operation modes.
RGB
YCbCr
Color space of the output video can be changed based on the type of the display device.
ATMOS
Endpoint devices support the most of known audio signal formats including HBR audio like
Dolby TrueHD, Dolby Atmos and DTS-HD Master Audio 7.1. #new
User can attach a local monitor to observe the video signal sent through the SFP+ ports.
The resolution and clock frequency are the same with the HDMI inputs, no internal scaling or
conversion is applied. The function is available in transmitter and transceiver operation modes.
User can attach local source devices to the input ports of the UBEX receiver. The streams with
the received resolution and clock frequency are transmitted on the output ports and no internal
scaling and color conversion is applied. The function is available in receiver operation mode.
and play, so they are swappable by the user.
The optimized fan operation allows installing the endpoint device to places where minimum
sound emission requires.
Rental application requires this function, which keeps the LCD screen and the LEDs unlit to hide
the device during the event.
Open-source API technology at the core makes these Lightware products easy to integrate into
third-party systems. Every bit of data in Lightware systems is openly available for higher level
management and monitoring systems.
The analog audio can be embedded to HDMI outputs and embedded audio can be routed to the
analog audio output in transmitter, receiver, and transceiver operation modes as well.
RS-232
AV systems can also contain serial port for controlled devices. Serial port supports any unit
that works with standard RS-232.
Infrared (IR) is a wireless technology used for device communication over short ranges.
Infrared is commonly used for remote control based applications. Third-party control systems
may send IR control commands to endpoints turning them on and off or switching their inputs.
Mounting threads on top and one of the sides for the R-series models to conform strict
installation safety regulations.
1. Introduction series – Extender Application Mode – User's Manual 13
1. Introduction series – Extender Application Mode – User's Manual 13
EXTENDER APPLICATION MODE
The available UBEX endpoint models have different features depending on their design. The following table contains the most important differences between the models:
IEC power
Neutrik powerCON
TRUE1
SFP+ slots
2x HDMI inputs *
2x HDMI outputs *
Analog audio input
Analog audio output
Infra input and output
RS-232
Neutrik
opticalCON DUO
Neutrik
opticalCON QUAD
Neutrik
opticalCON DUO
Neutrik
opticalCON QUAD
Neutrik etherCON
F-series
models
UBEX-PRO20-HDMI-F100 ------ -
(2x) - - -
UBEX-PRO20-HDMI-F110 -----
(3x) -
Rental (R-series) models
UBEX-PRO20-HDMI-R100 2xMM-2xDUO --
(2x) ------
(1x) - -
UBEX-PRO20-HDMI-R100 2xMM-QUAD -- -
(1x) - - ---
(2x) - -
UBEX-PRO20-HDMI-R100 2xSM-2xDUO -- - -
(2x) ----
(1x) - -
UBEX-PRO20-HDMI-R100 2xSM-QUAD -- - - -
(1x) ---
(2x) - -
UBEX-PRO20-HDMI-R100 2xSM-BiDi-DUO -- - -
(1x) ----
(2x) - -
* The HDMI input and output ports of the R-series endpoint models have ange mounting option.
1. Introduction series – Extender Application Mode – User's Manual 14
1. Introduction series – Extender Application Mode – User's Manual 14
EXTENDER APPLICATION MODE
UBEX extender system has two main application modes: #applicationmode
▪ - Point-to-point connection between a transmitter and a receiver, or between two
transceiver endpoint devices. This document is about the Extender mode only. #extendermode
▪ - Virtual AV matrix with more transmitters, receivers, transceivers, and a Matrix
Management Unit (MMU) which controls the AV network. The user's manual of the UBEX Matrix mode
can be downloaded from the following link: #matrixmode
UsersManual.pdf
INFO:The Extender or Matrix mode is set automatically in the endpoint device. If the device detects direct
connection with another endpoint device at the other side of the connection, the mode is set to Extender
mode; if the MMU connects to the device, the mode is set to Matrix mode.
The two modes bring different functionality and control methods for the endpoint and the MMU devices. The
following settings are available in the MMU only in case the Matrix mode:
▪
▪All network-related settings, e.g. DHCP setting, static IP address, etc.
▪All HDMI port settings for the inputs and outputs
▪EDID settings
▪Reloading factory defaults
▪
Switching between the Extender and Matrix mode changes the LCD menu structure and
the LW3 command protocol tree of the endpoint device. It happens because of the control settings listed
above transfer between the endpoints and the MMU.
Application diagram of Extender mode - TX-RX pair
The UBEX transmitter (UBEX-PRO20-HDMI-F110, TX operation mode) has two video source devices (media
servers) and an audio source device (media player). The streams can be checked on the local monitors
connected to the transmitter.
The UBEX receiver (UBEX-PRO20-HDMI-F110, RX operation mode) has two video sink devices (a 4K projector
The 4K projector is controlled via RS-232 interface by the UBEX receiver.
The UBEX extender pair is able to transmit a 4K UHD 60 Hz 4:4:4 and a 4K UHD 30 Hz 4:4:4, or two 4K 60 Hz
4:2:2 streams.
1. Introduction series – Extender Application Mode – User's Manual 15
1. Introduction series – Extender Application Mode – User's Manual 15
EXTENDER APPLICATION MODE
Application diagram of Extender mode - TRX-TRX pair
The UBEX-PRO20-HDMI-F100 transceiver connects to a D3 media server which is the source and the sink
device together. The incoming stream can be checked locally on the local monitor.
The UBEX-PRO20-HDMI-F110 transceiver has a source device (camera) and a sink device (4K projector). The
projector is controlled via RS-232 interface by the extender.
Thanks to the 20G full-duplex SFP+ interface the transceiver has no bandwidth limitation on the input and
output sides either. The device is able to receive and transmit 2x 4K60 Hz 4:4:4 24 bit streams.
2. Product Overview series – Extender Application Mode – User's Manual 16
2. Product Overview series – Extender Application Mode – User's Manual 16
EXTENDER APPLICATION MODE
2
Product Overview
ç
ç
2. Product Overview series – Extender Application Mode – User's Manual 17
2. Product Overview series – Extender Application Mode – User's Manual 17
EXTENDER APPLICATION MODE
1 The LEDs give immediate feedback about the current status of the endpoint
device. See the details about the operation of the LEDs in the Status LEDs
section (on the right side).
2 LCD screen showing the most important settings and parameters in the front
panel menu. The available settings and information depends on the current
application mode. See the details in the Front Panel LCD Menu Operations
chapter.
3
Easy setting and menu navigation by the jog dial control. Keep dialing and
click while getting feedback on the LCD.
The operation of the jog dial control knob can be disabled by the control lock
feature. The function can be enabled by the following methods:
▪Lightware Device Controller (LDC) software - see the details in the Front
Panel Tab section;
▪LW3 protocol command - see the details in the Control Lock section.
4 Reboots the device (the same as disconnecting from the power source and
reconnecting again).
21 43
blinking The device is powered and ready to use.
off The device is not powered or out of operation.
on All measured temperature and voltage values are within the limits.
blinking Measured temperature or voltage value is out of the limits.
off The device is not powered or out of operation.
on
working.
blinking
active.
off
on Matrix mode is active; the communication is live between the endpoint and the Matrix
Management Unit (MMU).
blinking Matrix mode is active; no communication between the endpoint and the MMU.
off Extender mode is active; no communication between the endpoint and the MMU.
Rental application requires this function, which keeps the LCD screen and the LEDs unlit to hide the device
during the event. The function can be enabled by the following methods:
▪Front panel LCD menu - see the details in the Front Panel section;
▪Lightware Device Controller (LDC) softwareBuilt-in website - see the details in the Front Panel Tab section;
▪LW3 protocol command - see the details in the Dark Mode Setting section.
2. Product Overview series – Extender Application Mode – User's Manual 18
2. Product Overview series – Extender Application Mode – User's Manual 18
EXTENDER APPLICATION MODE
5 Standard IEC connector accepting 100-240 V, 50 or 60 Hz. See more details
about it in the AC Power Connection section.
6
details about the cable wiring in the Ethernet Connectors section and the
concept of the operation in the Ethernet Control Interface section.
7 HDMI input ports with HDMI 2.0 support for the source devices. When the
transceiver. See more details about the HDMI interface in the Video Interface
section.
5 6 7 8 9
5
q w re
6 7 8 9
8 HDMI output ports with HDMI 2.0 support for sink devices. When the device
local HDMI output. The HDMI out 2 port is able to copy the signal of the HDMI
details about the HDMI interface in the Video Interface section.
9 Optical port slots for 2x 10 GbE SFP+ modules or 2x 10 GbE DAC cables. Ports
See more details about the SFP+ interface in the SFP+ Interface section.
q
port
5-pole Phoenix connector for balanced analog audio input. The port is
pin assignment in the Symmetrical Analog Stereo Audio Connector section,
about the cable wiring in the Audio Ports section, and about the analog audio
interface in the Audio Interface section.
w
5-pole Phoenix connector for balanced analog audio output. The port is
pin assignment in the Symmetrical Analog Stereo Audio Connector section,
about the cable wiring in the Audio Ports section, and about the analog audio
interface in the Audio Interface section.
e
detector (IR IN) and emitter (IR OUT) connection. See more details about the
pin assignment in the IR Connector section, and about the concept of the
operation in the Infrared Interface section.
r 3-pole Phoenix connector for serial communication. See more details about
the pin assignment in the RS-232 Connector section, about the cable wiring
in the Serial Ports section, and the concept of the operation in the Serial
Interface section.
2. Product Overview series – Extender Application Mode – User's Manual 19
2. Product Overview series – Extender Application Mode – User's Manual 19
EXTENDER APPLICATION MODE
1 Durable mounting ears on both sides of the device for the easy mounting in
the case of rental or staging application. The ears serve more purposes, see
the details in the Mounting Options - R-series Endpoint Devices section.
2 The LEDs give immediate feedback about the current status of the endpoint
device. See the details about the operation of the LEDs in the Status LEDs
section (on the right side).
3 LCD screen showing the most important settings and parameters in the front
panel menu. The available settings and information depends on the current
application mode. See the details in the Front Panel LCD Menu Operations
chapter.
4
Easy setting and menu navigation by the jog dial control. Keep dialing and
click while getting feedback on the LCD.
The operation of the jog dial control knob can be disabled by the control lock
feature. The function can be enabled by the following methods:
▪Lightware Device Controller (LDC) software - see the details in the Front
Panel Tab section;
▪LW3 protocol command - see the details in the Control Lock section.
5 Reboots the device (the same as disconnecting from the power source and
reconnecting again).
1
1
32 54
blinking The device is powered and ready to use.
off The device is not powered or out of operation.
on All measured temperature and voltage values are within the limits.
blinking Measured temperature or voltage value is out of the limits.
off The device is not powered or out of operation.
on
working.
blinking
active.
off
on Matrix mode is active; the communication is live between the endpoint and the Matrix
Management Unit (MMU).
blinking Matrix mode is active; no communication between the endpoint and the MMU.
off Extender mode is active; no communication between the endpoint and the MMU.
Rental application requires this function, which keeps the LCD screen and the LEDs unlit to hide the device
during the event. The function can be enabled by the following methods:
▪Front panel LCD menu - see the details in the Front Panel section;
▪Lightware Device Controller (LDC) softwareBuilt-in website - see the details in the Front Panel Tab section;
▪LW3 protocol command - see the details in the Dark Mode Setting section.
2. Product Overview series – Extender Application Mode – User's Manual 20
2. Product Overview series – Extender Application Mode – User's Manual 20
EXTENDER APPLICATION MODE
86 7 q9
86 7 w9
e
86 7 9
6
Neutrik powerCON TRUE1 NAC3MPX-WOT connector accepting 100-240 V,
50 or 60 Hz. See more details about it in the AC Power Connection section.
7
update purpose. See the details about the cable wiring in the Ethernet
Connectors section and the concept of the operation in the Ethernet Control
Interface section.
8
HDMI input ports with HDMI 2.0 support for the source devices. When the
transceiver. See more details about the HDMI interface in the Video Interface
section.
9
HDMI output ports with HDMI 2.0 support for sink devices. When the device
local HDMI output. The HDMI out 2 port is able to copy the signal of the HDMI
details about the HDMI interface in the Video Interface section.
q
connector for AV signal transmission.
▪2xMM-QUAD: supports multimode cable connection.
▪2xSM-QUAD: supports singlemode cable connection.
See more details about it in the Neutrik opticalCON Connectors section.
w
Neutrik opticalCON DUO NO2-4FDW-A singlemode
with BiDi support for AV signal transmission. See more details about it in the
Neutrik opticalCON Connectors section.
e
optical connectors for AV signal transmission.
▪2xMM-2xDUO: supports multimode cable connection.
▪2xSM-2xDUO: supports singlemode cable connection.
See more details about it in the Neutrik opticalCON Connectors section.
Neutrik opticalCON Connectors section and
Connection between F-series and R-series
Endpoints section.
This manual suits for next models
6
Table of contents
Other Lightware Extender manuals
Lightware
Lightware EDID MANAGER V4 User manual
Lightware
Lightware UMX-TPS-TX120 User manual
Lightware
Lightware DVI-OPT-TX220-Pro User manual
Lightware
Lightware VINX-120-HDMI-ENC User manual
Lightware
Lightware HDBaseT HDMI-TPS-RX110AY User manual
Lightware
Lightware HDMI-TPS-TX210 User manual
Lightware
Lightware UBEX Series User manual
Lightware
Lightware UMX-OPT-TX150R User manual
Lightware
Lightware MODEX-F15-OPTS-TX User manual
Lightware
Lightware VINX-110-HDMI-DEC User manual
Lightware
Lightware HDMI-3D-OPT-TX210A User manual
Lightware
Lightware WP-HDMI-TPS-RX97 Series User manual
Lightware
Lightware DVI-OPT-TX220-ST-Pro User manual
Lightware
Lightware UMX-TP-TX100R User manual
Lightware
Lightware UBEX-MMU-X200 User manual
Lightware
Lightware UBEX-PRO20-HDMI-F110 User manual
Lightware
Lightware Modex-Tx User manual
Lightware
Lightware HDBaseT HDMI-TPS-RX110AY User manual
Lightware
Lightware OPTJ Power tray Series User manual
Lightware
Lightware HDMI-TPS-TX95 User manual
