Lightware MX-FR Series User manual

MX-FR9, MX-FR17, MX-FR33L
MX-FR33R, MX-FR65R, MX-FR80R
with MX-CPU2 and MX I/O Boards
User’s Manual
Hybrid Modular Multimedia Matrix

MX-FR Series Modular Matrix Frames – User's Manual 2
Important Safety Instructions
Class I apparatus construction.
This equipment must be used with a mains power system with a
protective earth connection. The third (earth) pin is a safety feature,
do not bypass or disable it. The equipment should be operated only
from the power source indicated on the product.
To disconnect the equipment safely from power, remove the power
cord from the rear of the equipment, or from the power source. The
MAINS plug is used as the disconnect device, the disconnect device
shall remain readily operable.
There are no user-serviceable parts inside of the unit. Removal of the
cover will expose dangerous voltages. To avoid personal injury, do not
remove the cover. Do not operate the unit without the cover installed.
The appliance must be safely connected to multimedia systems.
Follow instructions described in this manual.
Replacing the AC fuse
Unplug the AC power cord from the device. Locate the AC fuse on the
rear panel. Replace only the AC fuse as indicated on the rear panel.
Connect the power cord to the switcher and to the AC power source.
Make sure the switcher is working properly.
Ventilation
For the correct ventilation and to avoid overheating ensure enough
free space around the appliance. Do not cover the appliance, let the
ventilation holes free and never block or bypass the fans (if any).
WARNING
To prevent injury, the apparatus is recommended to securely attach to

The apparatus shall not be exposed to dripping or splashing and that


be placed on the apparatus.
CAUTION AVIS
RISK OF ELECTRIC SHOCK
DO NOT OPEN
RISQUE DE CHOC ELECTRIQUE
NE PAS OUVRIR 
Waste Electrical & Electronic Equipment
WEEE
This marking shown on the product or its literature,
indicates that it should not be disposed with other
household wastes at the end of its working life. To
prevent possible harm to the environment or human
health from uncontrolled waste disposal, please
separate this from other types of wastes and recycle it
responsibly to promote the sustainable reuse of material
resources. Household users should contact either the
retailer where they purchased this product, or their local government
            
environmentally safe recycling. Business users should contact their
supplier and check the terms and conditions of the purchase contract.
This product should not be mixed with other commercial wastes for
disposal.
Caution for Boards with Optical Module: Laser product
INVISIBLE LASER RADIATION
AVOID DIRECT EYE EXPOSURE
CLASS 3R LASER PRODUCT
Radiated wavelengths:
778 nm, 800 nm, 825 nm, 850 nm
Output power <= 1mW
Classified by EN 60825-1:2008
Common Safety Symbols
Symbol Description
Direct current
Alternating current
Protective conductor terminal
On (Power)
Off (Power)
Caution, possibility of electric shock
Caution
Laser radiation





MX-FR Series Modular Matrix Frames – User's Manual 3
Symbol Legend
The following symbols and markings are used in the document:
WARNING!Safety-related information which is highly
recommended to read and keep in every case!
ATTENTION!Useful information to perform a successful procedure;
it is recommended to read.
DIFFERENCE!    

INFO:A notice which may contain additional information. Procedure
can be successful without reading it.
DEFINITION:The short description of a feature or a function.
TIPS AND TRICKS:Ideas which you may have not known yet but
can be useful.
Navigation Buttons
Go back to the previous page. If you clicked on a link previously,
you can go back to the source page by pressing the button.
Navigate to the Table of Contents.
Step back one page.
Step forward to the next page.




Document Information
Allpresentedfunctionsrefertotheindicated products.The descriptions
have been made during testing these functions in accordance with the

Item Version
Lightware Device Controller (LDC) software 1.33.2b1
Lightware Bootloader Software 3.3.3
 3.5.3
 1.7.2
 4.0.0
CPU board hardware v2.2
 1.0.8
Motherboard v2.3
Document revision: 3.1
Release date: 21.10.2019
Editor: Laszlo Zsedenyi
About Printing
Lightware Visual Engineering supports green technologies and
Eco-friend mentality. Thus, this document is made for digital usage
primarily. If you need to print out few pages for any reason, follow the
recommended printing settings:
▪Page size: A4
▪Output size: Fit to page or Match page size
▪Orientation: Landscape
TIPS AND TRICKS:Thanks to the size of the original page, a border
around the content (gray on the second picture below) makes
possible to organize the pages better. After punching the printed
pages, they can be placed easily into a ring folder.
123





MX-FR Series Modular Matrix Frames – User's Manual 4
1. INTRODUCTION...................................................................................6
 ...................................................................................6
 ................................................................................6
..................................................................7
 ....................................................................8
2. INSTALLATION.....................................................................................9
.........................................................................9
..........................................................................9
 ..............................................10
..................................................11
3. PRODUCT OVERVIEW ......................................................................12
 ...............................................12
 ............................................................................12
...........................................................12
 ........................................................12
 ............................................................... 13
 ...............................................................................13
............................................................................14
............................................................15
 ....................................................................................17
 ....................................................................................19
 ....................................................................................21
 ......................................................................................22
............................................................23
....................................................................... 23
 ............................................................. 23
............................................................. 23
 ................................. 24
 ....................................................................... 25
 .............................................................................26
..........................................................................28
4. OPERATION .......................................................................................30
 ................................................................................30
............................................................. 30
................................................31
............................................................................... 31
................................................................... 31
..................................................... 31
................................................................ 31
 ......................................................................................... 32
 .................................................... 33
............................................................................ 33
 ..................................................................................... 34
.....................................................35
....................................................................................... 35
..............................................................................35
 ..................................................................... 35
 ................................................................................. 36
 ...........................................................................37
..............................................38
 .................................................... 38
 .................................................... 38
 ....................................................39
.................................................................................. 39
................................................................................... 39
 ......................................................... 47
 ....................................................................................... 48
 ....................................................................... 48
 .......................................................................49
............................................................................ 49
 .............................................. 49
........................................................................................ 49
.......................................................................... 49
............................................................................ 50
 ...........................................................................50
5. SOFTWARE CONTROL - THE BUILT-IN WEB..................................51
..................................................................51
 .....................................................51
 ..................................................51
6. SOFTWARE CONTROL – LIGHTWARE DEVICE CONTROLLER
SOFTWARE .......................................................................................52
 ...................................................................52
..........................................................................52
...................53
 ........................................................................54
.......................................................................................... 54
........................................................................................... 56
....................................................58
........................................................................... 58
.............................................................................. 59
....................................................................... 60
.................................................................... 68
 ............................................................................................. 73
....................................................................................74
............................................................... 74
 .............................................................................. 75
 .................................................................. 75
 ................................................................................ 76
.............................................................................. 76
.............................................................................77
............................................................................ 77
.......................................................................... 78
 ............................................................................................... 78
.................................................................................................... 79
............................................................................. 80
 ........................................................................80
7. PROGRAMMER’S REFERENCE .......................................................81
.................................................................81
...................................................... 81
 ........................................................................... 81
......................................................................... 81
.......................................................................82
..................................................................... 82
......................................................................... 82
 ..................................................... 82
.................................................... 82
.............................................82
 ....................................................... 82
.......................................................... 82
..................................................... 83
................................................... 83
.......................................................................... 83
...................................................................... 83
........... 84
 ............................ 84
 .............................................................. 84
 ....................................................... 84
 .............................................................. 85
 ................................................................. 85
........................................................... 85
 ....................................................... 85
.............................................................................. 85
 ........................................................................... 85
............................................................................... 85
........................................................................ 86
 ........................................................................ 86
Table of Contents





MX-FR Series Modular Matrix Frames – User's Manual 5
 ..................................................................... 86
 .................................................... 86
 .................................................... 86
.................................................. 86
........................................... 86
 ............................................. 86
 .......................................... 86
...............................................87
 ................................................................. 87
................................................... 87
........................................... 87
 ..................................................... 87
 .................................................... 87
 ........................................................ 88
 ....................................................... 88
 ................................................................ 88
 ..........................................................88
.............................................................. 88
........................................................... 89
 ................................... 89
 ................................... 89
 ......................................................... 89
 ............................. 89
 .................................................. 89
...................................... 90
............................................................. 90
........................................................... 90
 .................................................................. 90
.......................................................................90
....................................................................... 90
................................................................... 91
 ...................................................................... 91
..................................................... 91
...................... 91
...............................................................92
............................................... 92
..................................................... 92
 .............................................. 92
 .................................................... 92
................................... 93
..................................................... 93
............................................... 93
............................................. 93
 ........................................................... 94
 ..............................................................94
 ............................................................................. 94
........................................................................... 95
.................................................................................. 95
.....................................................................95
.......................................................................... 95
............................................................................... 97
 ......................................................................... 99
.......................................................................... 102
 .................................................................... 105
 .............................................................................. 109
 ..............................................................................111
 ................................................................... 111
........................................................................ 112
 ................................................................... 113
.......................................................113
 .....................................113
 .............................................. 114
.............................................114
................................................ 114
 .................................................114
 ...................................................... 114
...................................................115
.................................................. 115
..................................................... 115
 ...................................................116
 ...................................................... 116
...................................................116
.................................................. 117
..................................................... 117
....................................................117
..................................................................117
 ........................................................ 117
 ..........................................................................117
...................................................118
8. FIRMWARE UPGRADE ....................................................................120
 .....................................120
 ........................................................122
..........................................123
9. TROUBLESHOOTING......................................................................124
 ......................125
10. TECHNOLOGIES............................................................................126
 ...................................................................126
.............................................................. 126
..................................................... 126
..................................................................127
 ..........................................127
................................................127
 ....................................................127
 ...............................................................128
..............................................129
............................................................130
 .................................................................................130
 ..................................................................................... 130
............................................................... 130
 .........................................................................130
........................................................130
.............................................................. 131
11. APPENDIX ......................................................................................132
 .........................................................................132
......................................................................................... 132
..............................................................................132
....................................................................................... 132
.......................................................133
...................133
.....................................133
....................................................................134
 ........................................................135
 .........................................................136
 .............................................................143
 ..........................................................143
 .................................................................................... 144
 .................................................................................... 144
................................................................. 145
 ..............................................................................145
.............................................................146





1. Introduction MX-FR Series Modular Matrix Frames – User's Manual 6
1
Introduction


important features in the below listed sections:
ç
ç
ç
ç

1
2Supplied with matrix routers with redundant PSU (not supplied with
MX-FR33L).
3
4Default accessory for boards with TPS2 ports and PoE-compatible
remote power feature.
5Only in the case of MX-FR33R matrix.
6Default accessory for boards with 5-pole Phoenix Analog Audio
ports.
Matrix Router Frame
with Rack Mounting
Ears
IEC Power Cable 1LAN Cross-link Cable,
CAT5e type, 3 m length
RS-232 Straight
Serial Cable


Safety and
Warranty
Info
Quick
Start
Guide
Power Supply Unit(s) 2
MX-CPU2 Board 3Router Input and
Output Board(s) 3
48V External PSU for
PoE Feature 4
Mounting Power Plug
with Fixing Ears (2x) 5
Phoenix Combicon
5-pole Connector 6
Description
Thank you for choosing Lightware matrix routers. The hybrid modular
matrix routers are capable of routing DVI or HDMI signals in a scalable
         
outputs.
These products are designed according to our well known philosophy

        
compatibility, more precise switching, control, troubleshooting and
signal measurement.

        
signal types and transport media options according to their system
requirements thanks to our Hybrid Modular Design.
The future-proofed matrix backplanes are able to switch to 12.8
Gigabit per second data rates allowing transportation of the next
generation HDMI, 4K x 2K, 3D and DisplayPort 1.1 video signals. All
Input boards e.g. DVI-I, 3G-SDI, etc. convert their respective Input
signals to the widest and broadest standard for all existing video
signals – uncompressed HDMI (including embedded audio). Output

output e.g. Fiber and Twisted Pair amongst others.
Model Denomination
About the Serial Number
Lightware devices contain a label indicating the unique serial number
of the product. The structure is the following:
MX-FR80R
Redundant Power Supply Unit
Frame
Matrix 80x inputs and 80x outputs
7A000941
Year of the manufacturing (3-9, A-Y):
7=2017, 8=2018, 9=2019, A=2020, etc...
6-digit running sequence number
Month of the manufacturing (1-9, A-C):
1=January, 2=February, ..., C=December





1. Introduction MX-FR Series Modular Matrix Frames – User's Manual 7
Features of the Device

The router allows any input to be switched to any
output or more outputs simultaneously.



video sources and displays.

The MX Series supports the highest 4K UHD,
2560x1600 and 1920x1080@120Hz resolutions,
standard HDMI 3D formats and all HDMI 1.3
resolutions, operating without signal latency.
1080p
HDTV 
720p, 1080i and 1080p etc. signals are supported with
or without HDCP encryption.
3D Support
Lightware provides complex, integrated solutions for
the digital age, also delivering 3D content in the case of

UMX Technology
UMX (Universal MatriX) technology was developed
to support various analog and digital video and
audio signal formats with several input connection
possibilities.

       
HDCP-encrypted and non-HDCP components can be
installed in the same system within the same chassis.
No Signal Latency With Zero Frame Delay
The signal management architecture ensures that there
is no delay added between the input and the output.
Advanced EDID Management
The user can emulate any EDID on the inputs
independently, read out and store any attached
monitor's EDID in the internal memory locations.
Built-in Cable Compensation
Each DVI, HDMI or SDI input port contains an individual
built-in cable extender.

Each output has a clean, jitter free signal, eliminating
signal instability and distortion caused by long cables

Frame Detector and Signal Analysis
The exact video and audio signal format can be
determined such as timing, frequencies, scan mode,
HDCP encryption, color range, color space and audio
sample rate.

This technology is designed to switch inputs remotely
on Lightware signal extenders without any additional
control cabling. The RICOD master device can control
the RICOD slave device connected to its input port.
POWER
5V
+
DVI +5V Power Support
500 mA constant current output on each DVI or HDMI
        
other DVI powered devices.
Redundant Power Supply
Accepting AC voltages from 100 to 240 Volts with 50
or 60 Hz line frequency on standard IEC connector.
Redundant hot-swappable PSUs on selected models.
Power Failure Memory
       
settings when powered on or after a power failure.
Every setting is stored in a non-volatile memory.
Front Panel Control
Sources and destinations have their own button to
select. Single switches can be executed or crosspoint
presets can be saved and reloaded. Almost every

menu.

The latest edition of LDC got more intuitive, user
friendly, smarter and a modern user interface to control
the Lightware devices. The application is available for

www
Built-in Website
Easy access from a web browser to control and

allowed to install.
Ethernet Control

with simple ASCII based protocol for controlling and

USB Control

RS-232 RS-232 or RS-422 Control
Simple ASCII-based protocol can be used for switching,
preset calling, status request, etc.
TPS Cable Diagnostic Tool
The tool within the LDC software will help you identify
potential twisted pair cable issues in your TPS-capable
(HDBaseT®-compliant) system.





1. Introduction MX-FR Series Modular Matrix Frames – User's Manual 8
Typical Applications
MX-DVII-HDCP-IB
8 CH ANALOG & DIGITAL INPUT BOARD
IN 1 IN 2 IN 3 IN 4 IN 5 IN 6 IN 7 IN 8
MX-HDMI-OPT-IB-SC IN1 IN 2 IN 3 IN 4 IN 5 IN 6 IN 5 IN 6
8CH OPTICAL INPUT BOARD
LASERACTIVE
HDCP
HDMI
SINGLEFIBER
L.A
HDCP
HDMI
SINGLE
LASERACTIVE
HDCP
HDMI
SINGLEPRESENT
LASERACTIVE
HDCP
HDMI
SIGNALPRESENT
LASERACTIVE
HDCP
HDMI
SINGLEPRESENT
MX-TPS-IB
12V3A
DC IN
8 CH TPS INPUT BOARD 12V power on TPS connector.Only use with compatible devices!
TPSIN 1 TPSIN 2 TPSIN 3 TPSIN 4 TPS IN 5 TPSIN 6 TPS IN 7 TPS IN 8
Ethernet
8CH INPUT BOARD FOR HDMI WITH 3D ANDANALOG AUDIO
MX-HDMI-3D-IB-A
IN 1 IN 2 IN 3 IN 4 IN 5 IN 6 IN 7 IN 8
MX-DVID-OB
8 CH DVI-D OUTPUT BOARD
OUT 1 OUT 2 OUT3 OUT 4 OUT 5 OUT 6 OUT7 OUT 8
MX-HDMI-OPT-OB-R-SC OUT1 OUT 2 OUT 3 OUT 4 OUT 5 OUT6 OUT 7 OUT8
8CH OPTICAL HDMI RECLOCKING INPUT BOARD
LASERACTIVE
HDCP
HDMI
SINGLEFIBER
L.A
HDCP
HDMI
SINGLE
LASERACTIVE
HDCP
HDMI
SINGLEPRESENT
LASERACTIVE
HDCP
HDMI
SIGNALPRESENT
LASERACTIVE
HDCP
HDMI
SINGLEPRESENT
MX-TPS-OB-S
12V4A
DC IN
8 CH TPS OUTPUT BOARD WITH DIGITALAUDIO 12V power on TPS connector.Only use with compatible devices!
TPSOUT 1 TPSOUT 2 TPSOUT 3 TPS OUT 4 TPSOUT 5 TPSOUT 6 TPS OUT 7 TPSOUT 8
S/PDIF I/O 1 S/PDIF I/O 2 S/PDIFI/O 3 S/PDIF I/O 4 S/PDIF I/O 5 S/PDIFI/O 6 S/PDIF I/O 7 S/PDIFI/O 8
8CH OUTPUT BOARD FOR HDMI WITH 3D ANDANALOG AUDIO
MX-HDMI-3D-OB-A
OUT 1 OUT 2 OUT 3 OUT 4 OUT 5 OUT 6 OUT 7 OUT 8
CATx cable
Laptop
Local
monitor LCD display
with speakers
HDBaseT
smart TV
Switcher
MX-FR33R
Audio
amplifier
Celling speakers
Projector
Blu-ray player
PC
PC
PC
Mp3
player
Projector
Projector
HDMI-
TPS-RX95
HDMI-TPS-
TX95
UMX-OPT-TX150R
Touch panel
Laptop
DVI-OPT-RX110
DVI-
OPT-TX110
Access
point
AV receiver
5.1 speakers
Audio amplifier
Stereo speakers
Monitor
HDMI-3D-OPT-
RX150RA
Laptop
UMX-TPS-TX140
Blu-ray
player
PIN: 2.1mm GPIO
RS-232
TXRX
AUDIO2 IN
DVI-I IN
IRIN IR OUT
LIVE
RS-232
SRVC
LINK
12V 1A DC
WP-UMX-
TPS-TX130-US
Laptop
MacBook
WP-UMX-TPS-TX130-US
VIDEO
SELECT
ETHERNET
INPUTSTATUS
VIDEO AUDIO
O
RESET
IR
VGA
DP
HDMI
Autoselect
AUDIO
SELECT SHOW
ME
2DPIN 3
AUDIO
DP
HDMI
TPSLink
Whenremote power is enabled, 12V present on TPS connector.
Checkcompability before connecting devices.
Forbest performance use CAT6 or CAT7 SFTP cable
HDMI
Access
point
SC MM OUT DC 5V
DVI cable
HDMI cable
VGA cable
CATx cable
Optical cable
Audio cable













Integrated System Application (left) and Applying Remote Control
Panels (above)





2. Installation MX-FR Series Modular Matrix Frames – User's Manual 9
2
Installation
The chapter is about the installation of the device and connecting to other
appliances, presenting also the mounting options.
ç
ç
ç
ç
Mounting Options
For the correct ventilation and to avoid overheating ensure enough
free space around the appliance. Do not cover the appliance, let
the ventilation holes free and never block or bypass the fans.
The front rack ears allow to mount the device as a standard rack unit

The dimensions of the frames can be found in the Mechanical
Drawings section.
TIPS AND TRICKS:Pay attention to the rear side of the matrix! Let
          
board without moving the matrix!
ATTENTION!Fix the frame to the rack rail by applying all mounting
holes. Choose properly sized screws for mounting. Keep minimum
two threads left after the nut screw.
threads
(2 or more)
rack rail
rack shelf mounting ear
rack screw
flat washer
cage nut
Connecting Steps


recommended.

control options.
Power
Connect the power cord to the AC power socket and to the
matrix. Switch it on and all the connected devices.
          
Controller software see the Software Control – Lightware Device
Controller Software section.
          
 section.
Frame type The number of the mounting holes
MX-FR9 2x4 pcs.
MX-FR17
MX-FR33L
2x6 pcs.
MX-FR33R
MX-FR65R
MX-FR80R
CONTROL
LOCK
OUTPUT
LOCK
1
1
2
2
3 4 5 6 7 8 9
3 4 5 6 7 8 9
TAKE
AUTO
SAVE
PRESET
LOAD
PRESET
SOURCES
TESTINPUT
PREVIEWOUTPUT
DESTINATIONS
POWER
USB
CONTROL
ESC
MX-FR9
9x9 DIGITAL MATRIX ROUTER
EDID
SIGNAL
PRESENT
DVI
HDMI
CATx
VGA
Audio
OPT
RS-232
Power
LAN USB
DVI
HDMI
CATx
Audio
OPT
LCD Display
Projector
Laptop
Computer
Blu-ray Player
Media Player
Transmitter
Local Control Ethernet
  

Receiver
CATx
DVI
HDMI
VGA
Audio
LAN
RS-232
USB





2. Installation MX-FR Series Modular Matrix Frames – User's Manual 10

WARNING!The I/O boards and the CPU board are not hot-
        
inserting a board.
Important Notices about the Boards

have different connectors on the motherboard in the matrix, thus, they
have dedicated slots as indicated in the rear plate. In general:
▪CPU board is placed in the top position always.
▪Output boards are located below the CPU board.
▪Input boards are located in the bottom slots.
Installing a Board
Step 1. Make sure the matrix is powered off.
Step 2.           
previously installed board.
CPU
Step 3. Take the board by touching the metal plate only, to prevent
ESD-caused problems.
Step 4. Insert the edge of the board in the slot at both sides.
8CH OUTPUT BOARD FOR HDMI WITH 3D AND ANALOGAUDIO
MX-HDMI-3D-OB-A
OUT 1 OUT2 OUT3 OUT 4 OUT 5 OUT 6 OUT 7 OUT 8
CPU
8CH OUTPUT BOARD FOR HDMI WITH 3D AND ANALOGAUDIO
MX-HDMI-3D-OB-A
OUT 1 OUT2 OUT3 OUT 4 OUT 5 OUT 6 OUT 7 OUT 8
Step 5. Gently push the board in until it stops, then press the plate at
the indicated places at once. Thus, the connector of the board
and the motherboard will be put together.
Step 6. 
with PZ1 head.
INFO:The mute-, lock-, and crosspoint states are stored in the



in a matrix and an MX-TPS-IB-A board was installed later, the
previous settings would be applied to the board.
CPU
8CH OUTPUT BOARD FOR HDMI WITH 3D AND ANALOGAUDIO
MX-HDMI-3D-OB-A
OUT 1 OUT2 OUT3 OUT 4 OUT 5 OUT 6 OUT 7 OUT 8





2. Installation MX-FR Series Modular Matrix Frames – User's Manual 11

MX-FR80R and MX-FR65R Frames
The PSU of these frames is hot-swappable, thus, you do not have to
switch off the matrix to replace or install a PSU.
Three slots are available for the FNP-850-12RG PSUs. The load depend

is to have two PSUs in use continuously. Thus, the third PSU can be
replaced safely:
Step 1. Unplug the power cord from the AC socket, then from the
desired PSU.
Step 2. Loose the xing screw
screwdriver.
Step 3. Pull down the lever (1), then pull out (2) the PSU unit by

Step 4. To install another PSU: insert the unit in the slot, and push it
until it stops.
Step 5. 

Step 6. Plug the power cord to the PSU, then to the AC socket.
12
MX-FR33R Frame
Two types of PSUs exist for MX-FR33R frames. Both can supply the
frame, but the two units are not interchangeable with each other. See
more details in the Redundant Power Supplies section.
ATTENTION!The MX-PSU-350 type is hot-swappable, thus, you do
not have to turn off the matrix to replace a PSU. Former type of
PSUs do not support this feature.
The MX-PSU-350 PSU of the MX-FR33R frame can be replaced similarly

Step 1. Switch off the desired PSU (1) and unplug the power cord
form the AC socket
Step 2. 2) from the PSU and pull out
the power cord.
Step 3. 3), then pull out the PSU.
Step 4. Insert the new PSU, push it until it stops.
Step 5. 
with PZ1 head.
MX-DVII-HDCP-IB
8 CH ANALOG & DIGITAL INPUT BOARD
IN 1 IN 2 IN 3 IN 4 IN 5 IN 6 IN 7 IN 8
MX-HDMI-OPT-IB-SC IN 1 IN 2 IN 3 IN 4 IN 5 IN 6 IN 5 IN 6
8CH OPTICAL INPUT BOARD
LASER ACTIVE
HDCP
HDMI
SINGLE FIBER
L.A
HDCP
HDMI
SINGLE
LASER ACTIVE
HDCP
HDMI
SINGLE PRESENT
LASER ACTIVE
HDCP
HDMI
SIGNAL PRESENT
LASER ACTIVE
HDCP
HDMI
SINGLE PRESENT
MX-TPS-IB
12V 3A
DC IN
8 CH TPS INPUT BOARD 12V power on TPS connector. Only use with compatible devices!
TPS IN 1 TPS IN 2 TPS IN 3 TPS IN 4 TPS IN 5 TPS IN 6 TPS IN 7
TPS IN 8
Ethernet
8CH INPUT BOARD FOR HDMI WITH 3D AND ANALOG AUDIO
MX-HDMI-3D-IB-A
IN 1 IN 2 IN 3 IN 4 IN 5
IN 6
MX-DVID-OB
8 CH DVI-D OUTPUT BOARD
OUT 1 OUT 2 OUT 3 OUT 4 OUT 5 OUT 6 OUT 7 OUT 8
MX-HDMI-OPT-OB-R-SC OUT 1 OUT 2
OUT 3
8CH OPTICAL HDMI RECLOCKING INPUT BOARD
LASER ACTIVE
HDCP
HDMI
SINGLE FIBER
LASER ACTIVE
HDCP
HDMI
SINGLE PRESENT
MX-TPS-OB-S
12V 4A
DC IN
8 CH TPS OUTPUT BOARD WITH DIGITAL AUDIO
TPS OUT 1 TPS OUT 2 TPS OUT 3 TPS OUT 4 TPS OUT 5 TPS OUT 6 TPS OUT 7 TPS OUT 8
S/PDIF I/O 1 S/PDIF I/O 2 S/PDIF I/O 3 S/PDIF I/O 4 S/PDIF I/O 5 S/PDIF I/O 6 S/PDIF I/O 7 S/PDIF I/O 8
8CH OUTPUT BOARD FOR HDMI WITH 3D AND ANALOG AUDIO
MX-HDMI-3D-OB-A
2
3
3
1





3. Product Overview MX-FR Series Modular Matrix Frames – User's Manual 12
3
Product Overview
The following sections are about the physical structure of the device, input/
output ports and connectors:
ç
ç
ç
ç
ç
ç
ç
çMX-FR33R
çMX-FR33L
çMX-FR17
çMX-FR9
ç
ç
ç




signal transmission. The hybrid architecture allows signal routing
between boards even if they have different connectors. This way any
input can be routed to any or more outputs if the output interface is
capable of transmitting the signal. For example, a DVI source can
be routed to an HDMI sink, but HDCP-encrypted sources cannot be
routed to non-HDCP capable DVI sinks.
Available interface types include DVI-D single- and dual-link, HDMI,

Router Frames

needs various input and output interface boards are available, that can
be mixed in the same frame without limitation.
INFO:The maximum number of input and output ports includes
the Test input and Preview output port of the MX-CPU2 processor
board.

The mute-, lock-, and crosspoint states are stored in the matrix, all


E.g. if an MX-TPS-IB had been installed previously in a matrix and an
MX-TPS-IB-A board was installed later, the previous settings would be
applied to the board.
Frame
type
Rack
height

input
boards

input
ports

output
boards

output
ports
MX-FR9 4U 1 9 1 9
MX-FR17 4U 2 17 2 17
MX-FR33L 6U 4 33 4 33
MX-FR33R 7U 4 33 4 33
MX-FR65R 15U 8 65 8 65
MX-FR80R 15U 10 80 10 80
MX-CPU2 Processor Board
The CPU board is necessary for the router frame to work. This board is
responsible for controlling the matrix and storing the settings.
Test Input and Preview Output Ports
The MX-CPU2 board has a TEST INPUT and a PREVIEW OUTPUT port.
Although these ports have special functions they can be used as

MX-FR80R and MX-FR65R
Used in the MX-FR80R (and MX-FR65R) router frame, the Preview
output is directly connected to the 80th output port with a DVI splitter.
Therefore this port always outputs the same signal as the 80th output,
even if it uses a different interface (TP, OPT, etc.).
The 80th input port of the crosspoint is multiplexed between the
Test input port and the 8th port of the 10th input board. This switch
is independent from the crosspoint state. The selected port (Test
input or Input board #10) will be available as the 80th input on the
crosspoint switch.
Other Frames
All other frames use the Test input and Preview output just like any
other ports. These ports are referred as the last port in the crosspoint.
Other Connectors
The MX-CPU2 board has Ethernet, serial, and alarm ports as well.
Frame Type Test Input Preview Output
MX-FR9 in 9 out 9
MX-FR17 in 17 out 17
MX-FR33L in 33 out 33
MX-FR33R in 33 out 33
MX-FR65R in 80 out 80
MX-FR80R multiplexed in 80 distributed out 80





3. Product Overview MX-FR Series Modular Matrix Frames – User's Manual 13
MX-FR65R Limitations
The MX-FR65R matrix frame is physically identical to the MX-FR80R.


MX-FR65R allows only 8.
The frame has 10 physical board slots but will not boot up when more
than 8 input or output boards are inserted. Only the number of boards
is limited thus they can be used in any of the physical slots. However
to gain access to the Test input and Preview output ports on the MX-
CPU2 it is recommended to leave the last slot empty.
For example, if the input slot #1 is empty, there can be 8 input boards
in slots #2 to #9 and the slot #10 left empty. In this case the 65 input
ports can be accessed with port numbers 9-72 and 80.
MX-CPU2 Board Features
       
modular matrix routers:
All older models can be upgraded with MX-CPU2 processor board.
Changes with MX-CPU2 upgrade
▪Extra I/O ports – Get an additional DVI-HDCP input and output
port.
▪Ethernet control     
connections.
▪Combine HDCP and non-HDCP boards – Any interface board
combination is possible in the same frame.
Older models New models
MX16x16DVI-Pro
MX32x32DVI-Pro
MX32x32HDMI-Pro
MX16x16HDMI-Pro
MX32x32DVI-HDCP-Pro
MX16x16DVI-HDCP-Pro
MX-DVI-FR16
MX-DVI-FR32
MX-DVI-FR32R
MX-FR9
MX-FR17
MX-FR33(L)
MX-FR33R
MX-FR65R
MX-FR80R
Input Boards
Several input interface boards are available. Each model has different capabilities and functions. Below table shows a summary of the main features.
1Any DVI connector can be plugged in but only digital pins are connected.
2
3TM on the TPS ports.
4
Model Default
Connectors
Optional
Connectors

Capability

Capability
EDID
Emulation
Cable

MX-DVID-IB 8x DVI-I (D) 1- - - ü ü
MX-DVI-4K-IB 8x DVI-I (D) 1-ü ü ü ü
MX-DVI-TP-IB  - - - - ü
MX-DVI-TP-IB+  - - - ü ü
MX-DVI-OPT-IB-… 8x optical - - - - -
MX-DVIDL-IB 4x DVI-I (D) (dual link) - - - ü ü
MX-DVIDL-OPT-IB-… 4x optical (dual link) - - - - -
MX-DVI-HDCP-IB 8x DVI-I (D) 1-ü ü ü ü
MX-DVII-HDCP-IB 8x DVI-I - ü ü ü ü 2
MXD-UMX-IB 8x DVI-I  ü ü ü ü 2
MX-HDMI-IB 8x HDMI - ü ü ü ü
MX-HDMI-TP-IB  -ü ü ü ü
MXD-HDMI-TP-IB   ü ü ü ü
MX-HDMI-OPT-IB-… 8x optical - ü ü - -
MX-3GSDI-IB  -ü- - ü
MX-CPU2 Test Input 1x DVI-I (D) 1-ü ü ü -
MX-TPS-IB, -A, -S 8x TPS  ü ü ü ü 3
MX-HDMI-3D-IB, -A, -S 8x HDMI  ü ü ü ü 3
MX-TPS2-IB-P, -AP, -SP 8x TPS  ü ü ü ü 3
MX-4TPS2-4HDMI-IB, -A,- S 4x TPS, 4x HDMI  ü ü ü ü 3
MX-4TPS2-4HDMI-IB-P, -AP, -SP 4x TPS 4, 4x HDMI  ü ü ü ü 3





3. Product Overview MX-FR Series Modular Matrix Frames – User's Manual 14
Output Boards
Several output interface boards are available. Each model has different capabilities and functions. The table below shows a
summary of the main features.
1Any DVI connector can be plugged in but only digital pins are connected.
2

Model Deafult
Connectors
Optional
Connectors

Capability

Capability
EDID
Reading
Re-
clocking
MX-DVID-OB 8x DVI-I (D) 1- - - ü ü
MX-DVI-4K-OB 8x DVI-I (D) 1-ü ü ü ü
MX-DVI-TP-OB  - - - - ü
MX-DVI-TP-OB+  - - - ü ü
MX-DVI-OPT-OB-… 8x optical - - - - -
MX-DVIDL-OPT-OB... 4x optical (dual link) - ----
MX-DVI-OPT-OB-R-… 8x optical - - - - ü
MX-DVIDL-OB 4x DVI-I (D) (dual link) 1- - - ü ü
MX-DVI-HDCP-OB 8x DVI-I (D) 1-ü ü ü ü
MX-HDMI-OB  -ü ü ü ü
MX-HDMI-TP-OB  -ü ü ü ü
MXD-HDMI-TP-OB   ü ü ü ü
MX-HDMI-OPT-OB-… 8x optical - üüü -
MX-CPU2 Preview Out 1x DVI-I (D) 1-ü ü ü ü
MX-HDMI-3D-OB, -A, -S 8x HDMI  ü ü ü ü
MX-HDMI-OPT-OB-R-… 8x optical - ü ü ü ü
MX-TPS-OB, -A, -S 8x TPS  ü ü ü ü
MX-TPS2-OB-P, -AP, -SP 8x TPS 2 ü ü ü ü
MX-AUDIO-OB-A 8x Phoenix - ü ü ü ü
MX-4TPS2-4HDMI-OB, -A, -S 4x TPS, 4x HDMI  ü ü ü ü
MX-4TPS-4HDMI-OB-P, -AP, -SP 4x TPS, 4x HDMI  ü ü ü ü





3. Product Overview MX-FR Series Modular Matrix Frames – User's Manual 15
MX-FR80R and MX-FR65R
Front View
ATTENTION!In the case of the MX-FR65R matrix the attached label can be
seen on the front panel.
INFO:The unlabeled buttons are disabled and reserved for future developments.
5
9
q8
7
4
1
6
2
w
r
3
1Menu display Displays status information and menu operation.
2Menu navigation Up, down, left, right, escape, and enter buttons for menu
navigation.
3Status LEDs CPU live LED blinks to indicate normal operation. Power LED
lights green when the router is powered on.
4USB control USB connection for Lightware Device Controller Software.
5Take / Auto Displays the actual switching mode of the router (TAKE or
AUTOTAKE). Long press toggles the switching mode, short
press executes switching in TAKE mode.
6Preset buttons Load preset: apply a previously saved crosspoint preset from
one of the preset memories.
Save preset: stores actual crosspoint state, in one of the preset
memories.
7Signal present Displays live sources and attached sinks on source and
destination buttons.
8EDID mode Switches the Menu display to EDID menu allowing EDID switch,
EDID save etc.
9Control lock         
illuminated, all operations on front panel are prohibited.
qOutput lock Locks and protects one (or more) outputs. Inhibits accidental
input changing on protected output.
wSource buttons Source buttons have three functions: to select an input, to

TAKE mode).
eDestination buttons Destination buttons have two functions: to select an output, or

Congured as
MX-FR65R





3. Product Overview MX-FR Series Modular Matrix Frames – User's Manual 16
Rear View
INFO:The MX-FR65R is shipped with 2 power supply units and the rightmost PSU slot is covered
with a blank metal plate.
INFO:The MX-FR65R has a label showing that maximum 8 input and
output boards are allowed.
1Status LEDs LED indicators for internal DC power voltages and alarm.
2DIP settings Special settings can be made with these switches.
3Alarm out Standard SMPTE 269M alarm output with BNC connector. See
the Alarm Output section for more information.
4Preview output DVI output connector, which is directly connected to the 80th
output. See the DVI Inputs and Outputs and the Test Input and
Preview Output sections for more information.
5Test input 
for the 80th input. See the DVI Inputs and Outputs and the Test
Input and Preview Output sections.
6Serial port 9-pole D-SUB female connector for RS-232 serial connection.
See the RS-232 Ports section for more information.
7Ethernet port 
         
can be also performed over this interface. See the Ethernet
Ports section for more information.
8Reset button Reset button reboots the matrix. This is same as disconnecting
from power source, and reconnect again.
9CPU live CPU live LED blinks to indicate normal operation.
qInput boards Modular input board slots. Connect DVI source devices to
these connectors.
wOutput boards Modular output board slots. Connect DVI sink devices to these
connectors.
ePower supplies Hot swap slots for power supply units. See the Powering on
section for more information.
12 3
9
q
456 7 8
w
e
Maximum allowed
Input boards: 8
Output boards: 8





3. Product Overview MX-FR Series Modular Matrix Frames – User's Manual 17
MX-FR33R
Front View
12
5
6
w
e
4
3
q
9
7
8
1USB control USB connection for Lightware Device Controller software.
2Menu display Displays status information and menu operation.
3Menu navigation Arrows, escape, and enter buttons for menu navigation.
4Status LEDs CPU live LED blinks to indicate normal operation. Power LED
lights green when the router is powered on.
5Control lock 
is illuminated, all operations on front panel are prohibited.
6Output lock Locks one (or more) outputs. Inhibits accidental input changing
on protected output.
7Source buttons Source buttons can be used to select an input or preset or to

8Destination buttons Destination buttons can be used to select an output, or view

9Take / Auto Displays the actual switching mode (TAKE or AUTOTAKE).
Long press toggles the switching mode, short press executes
switching in TAKE mode.
qPreset buttons Load preset: apply a previously saved crosspoint preset
from one of the preset memories. Save preset: stores actual
crosspoint state, in one of the preset memories.
wEDID mode Switches the Menu display to EDID menu allowing EDID switch,
EDID save etc.
eSignal present Displays live sources and attached sinks on source and
destination buttons.





3. Product Overview MX-FR Series Modular Matrix Frames – User's Manual 18
Rear View
1Status LEDs LED indicators for internal DC power voltages and alarm.
2DIP settings Special settings can be made with these switches.
3Alarm out Standard SMPTE 269M alarm output with BNC connector. See
the Alarm Output section for more information.
4Preview output DVI output connector, which is directly connected to the 80th
output. See the DVI Inputs and Outputs and the Test Input and
Preview Output sections for more information.
5Test input 
for the 80th input. See the DVI Inputs and Outputs and the Test
Input and Preview Output sections.
6Serial port 9 pole D-SUB female connector for RS-232 serial connection.
See the RS-232 Ports section for more information.
7Ethernet port 
         
can be also performed over this interface. See the Ethernet
Ports section for more information.
8Reset button Reset button reboots the matrix. This is same as disconnecting
from power source, and reconnect again.
9CPU live CPU live LED blinks to indicate normal operation.
qOutput boards Modular output board slots. Connect DVI sink devices to these
connectors.
wInput boards Modular input board slots. Connect DVI source devices to
these connectors.
ePower supplies Hot swap slots for power supply units. See the Powering on
section for more information.
1 2 3
9
q
w
4 5 6 7 8
e





3. Product Overview MX-FR Series Modular Matrix Frames – User's Manual 19
MX-FR33L
Front View
12
9
5
6
w
e
43
q
7
8
1USB control USB connection for Lightware Device Controller software.
2Menu display Displays status information and menu operation.
3Menu navigation Arrows, escape, and enter buttons for menu navigation.
4Status LEDs CPU live LED blinks to indicate normal operation. Power LED
lights green when the router is powered on.
5Control lock 
illuminated, all operations on front panel are prohibited.
6Output lock Locks one (or more) outputs. Inhibits accidental input changing
on protected output.
7Source buttons Source buttons can be used to select an input or preset or to

8Destination buttons Destination buttons can be used to select an output, or view

9Take / Auto Displays the actual switching mode (TAKE or AUTOTAKE).
Long press toggles the switching mode, short press executes
switching in TAKE mode.
qPreset buttons Load preset: apply a previously saved crosspoint preset
from one of the preset memories. Save preset: stores actual
crosspoint state, in one of the preset memories.
wEDID mode Switches the Menu display to EDID menu allowing EDID switch,
EDID save etc.
eSignal present Displays live sources and attached sinks on source and
destination buttons.





3. Product Overview MX-FR Series Modular Matrix Frames – User's Manual 20
Rear View
1Status LEDs LED indicators for internal DC power voltages and alarm.
2DIP settings Special settings can be made with these switches.
3Alarm out Standard SMPTE 269M alarm output with BNC connector. See
the Alarm Output section for more information.
4Preview output DVI output connector, which is directly connected to the 80th
output. See the DVI Inputs and Outputs and the Test Input and
Preview Output sections for more information.
5Test input 
for the 80th input. See the DVI Inputs and Outputs and the Test
Input and Preview Output sections.
6Serial port 9 pole D-SUB female connector for RS-232 serial connection.
See the RS-232 Ports section for more information.
7Ethernet port 
         
can be also performed over this interface. See the Ethernet
Ports section for more information.
8Reset button Reset button reboots the matrix. This is same as disconnecting
from power source, and reconnect again.
9CPU live CPU live LED blinks to indicate normal operation.
qOutput boards Modular output board slots. Connect DVI sink devices to these
connectors.
wInput boards Modular input board slots. Connect DVI source devices to
these connectors.
ePower Mains switch and AC power connector.
1 2 3
9
w
q
4 5 6 7 8
e



