Lilin PMH-POE08130WT4 User manual

8 Ports with 4 ports
PoE Plus
Fast Ethernet Switch
8 x 10/100 with 4 PoE+802.3at
w/ 2 Gigabit Combo Ports
RJ45/SFP
User’s Manual
FCC Warning
This device has been tested and found to
comply with limits for a Class A digital device,
pursuant to Part 15 of FCC Rules. These
limits are designed to provide reasonable
protection against harmful interference when
the equipment is operated in a commercial
environment. This equipment generates and
radiates radio frequency energy and, if not
installed and used in accordance with the user’s
manual, it may cause interference in which case
users will be required to correct interference at
their own expenses.
CE Warning
This is a Class A product. In a domestic
environment, this product may cause radio
interference in which case the user may be
required to take adequate measures.
Introduction
This 8 ports 10/100 Mbps with 4 ports PoE+
switch includes auto-MDI/MDIX crossover
detection function. 8 of those ports are all built
with PoE functionality, providing the ultimate
choice in network flexibility. With this added
PoE feature, this switch is an ideal solution for
building wireless, IP surveillance, and VoIP
networks.
The rack-mount size was specifically designed
for medium to large workgroups. The Switch can
be installed where space is limited; moreover it
provides smooth network migration and easy
upgrade to network capacity. The 19” size can
be rack-mount on 19” cabinet.
Package Contents
Before you start to install this switch, please
verify your package that contains the following
items:
One Fast Ethernet PoE Switch
One Power Cord
One User’s Manual
A pair Rack-mount kit + 8 Screws
Note: If any of these items is found missing or
damaged, please contact your local supplier for
replacement.
Key Features
8- Port 10/100M Switch with 4 PSE/PoE
function ports (5-8 ports)
Supporting the power Max. 30 W for each
PSE/PoE port
19” rack-mount size
Auto-detect full/half-duplex modes for any
port
Dedicated full-duplex 200Mbps bandwidth
Store-and-Forward switching methods
IEEE 802.3x flow control for full-duplex and
back-pressure flow control for half-duplex
Non-blocking full wire speed forwarding
Auto-MDI/MDI-X function for any port
Front Panel (LEDs)
LED Indicators of 8 Port with 4 ports
PoE 10/100M Switch
LED
Status
Description
Power
On
Power is on.
Off
Power is off.
LINK/ACT
On
Port is for connection.
Off
No connection.
Blinking
Data is transmitting or
receiving
PoE On
Port is linked to Power
Device
Off
No Power Device is
connected
1000M
On
Port is for connection.
Off
No connection.
Blinking
Data is transmitting or
receiving
Connections
Switch/Hub to this 4 Port PoE Fast
Ethernet Switch
This switch provides automatic crossover
detection functionality for any port. It is
simple and friendly to up-link to another
switch without crossover cable.

PC/Other devices to this 8 Ports Fast
Ethernet Switch
Via a twisted pair cable straight through, this
switch can be connected to PCs, servers and
other network devices.
Power Device to this 8 Port PoE Fast
Ethernet Switch and getting 48V
power source through Cat. 5 cables
Using Cat. 5 twisted-
pair cable to connect
Power Device to the port 1~8 of this switch,
and
then this
switch will supply 48V power to Power
Device over Cat. 5 twisted-pair
cable. Please
be noted Power Device shou
ld also comply with
IEEE 802.3at.
Rear Panel (Power)
AC input
AC input (100~240V/AC, 50~60Hz)
Technical Specifications
Standards
IEEE 802.3at /af
IEEE 802.3 10BaseT
IEEE 802.3u 100BaseTX
IEEE 802.3x Flow control
Features
Number of Ports: 8-port
PoE+ 2 Gigabit Combo Ports
RJ45/SFP
MAC Address: 4K
Buffer Memory: 2.75M bits
Transmission Method: Store
and Forward
Filtering/
Forwarding
Rates
100Mbps port – 148,800pps
10Mbps – 14,880pps
Transmission
Media
10BaseT Cat. 3, 4, 5
UTP/STP
100BaseTX Cat. 5 UTP/STP
LED
Indicators
Per Port: LINK/ACT, PoE
ACT/Status
Per Unit: Power
Power Input
100~240V/AC, 50~60Hz
Power
Output
48V/DC Per Port Output –
30 W Max Per Port
4 Ports at Full 30 W
Output Supported
Power
Consumption
130 Watts (Max)
Dimensions 440 × 220 × 44 mm
(L x W x H)
Weight
3.8 kg
Operating
Temperature
0 to 45℃
Storage
Temperature
-20 to 90℃
Humidity 10 to 90% RH
(non-condensing)
Certifications
FCC Class A, CE