8 Ports PoE Plus
Fast Ethernet Switch
8 x 10/100 PoE+ 802.3at
w/ 2 Gigabit Combo Ports
RJ45/SFP
User’s Manual
FCC Warning
This device has been tested and found to
comply with limits for a Class A digital device,
pursuant to Part 15 of FCC Rules. These
limits are designed to provide reasonable
protection against harmful interference when
the equipment is operated in a commercial
environment. This equipment generates and
radiates radio frequency energy and, if not
installed and used in accordance with the user’s
manual, it may cause interference in which case
users will be required to correct interference at
their own expenses.
CE Warning
This is a Class A product. In a domestic
environment, this product may cause radio
interference in which case the user may be
required to take adequate measures.
Introduction
This 8 ports 10/100 Mbps PoE switch includes
auto-MDI/MDIX crossover detection function. 8
of those ports are all built with PoE functionality,
providing the ultimate choice in network
flexibility. With this added PoE feature, this
switch is an ideal solution for building wireless,
IP surveillance, and VoIP networks.
The rack-mount size was specifically designed
for medium to large workgroups. The Switch can
be installed where space is limited; moreover it
provides smooth network migration and easy
upgrade to network capacity. The 19” size can
be rack-mount on 19” cabinet.
Package Contents
Before you start to install this switch, please
verify your package that contains the following
items:
One Fast Ethernet PoE Switch
One Power Code
One User’s Manual
A pair Rack-mount kit + 8 Screws
Note: If any of these items is found missing or
damaged, please contact your local supplier for
replacement.
Key Features
8- Port 10/100M (Auto-negotiation) Switch
8 PSE/PoE function ports
Supporting the power Max. 30 W for each
PSE/PoE port
19” rack-mount size
Auto-detect full/half-duplex modes for any
port
Dedicated full-duplex 200Mbps bandwidth
Store-and-Forward switching methods
IEEE 802.3x flow control for full-duplex and
back-pressure flow control for half-duplex
Non-blocking full wire speed forwarding
Auto-MDI/MDI-X function for any port
Front Panel (LEDs)
LED Indicators of 8 Port PoE 10/100M
Switch
LED Status Description
Power On Power is on.
Off Power is off.
LINK/ACT
On Port is for connection.
Off No connection.
Blinking Data is transmitting or
receiving
PoE On Port is linked to Power
Device
Off No Power Device is
connected
1000M
On Port is for connection.
Off No connection.
Blinking Data is transmitting or
receiving
Connections
Switch/Hub to this 8 Port PoE Fast
Ethernet Switch
This switch provides automatic crossover
detection functionality for any port. It is
simple and friendly to up-link to another
switch without crossover cable.
