lilitab K Pro User manual

39 Larkspur Street | Suite B t: 888.705.0190 San Rafael, CA 94901 e: [email protected] www.lilitab.com
lilitab K Pro Head Unit
for Samsung Tab A 10.1”
Assembly Instructions
v1.0

lilitab K Pro Head Unit for Samsung Tab A 10.1” Assembly Instructions v1.0 2
TABLE OF CONTENTS
Packing List............................................ 2
Assembly Instructions and Cleaning Instructions ............. 3
PACKING LIST
GOT QUESTIONS? WE’RE HERE TO HELP!
EMAIL [email protected]om PHONE [phone]

lilitab K Pro Head Unit for Samsung Tab A 10.1” Assembly Instructions v1.0 3
1. Spray the Brillianize onto one of
the cloths provided.
WARNING: Other cloth/material may
scratch the surface of your lilitab
2. DO NOT spray directly onto your lilitab!
3. Rub gently in a circular motion to remove
fingerprints and dirt.
WARNING: Applying excess pressure can
scratch the surface of your lilitab.
Cleaning kit available on our
website in the accessories section.
ASSEMBLY INSTRUCTIONS
3. Position the faceplate over the tablet.
Be sure to align the openings. Gently press
down around the edges—it should snap
into place.
Refer to your lilitab Mount owner’s manual
for instructions on attaching the head unit.
1. Open the lilitab head unit by placing it
facedown on a clean surface and squeezing
the finger latches together as shown.
Carefully lift up and the faceplate will
come off, allowing access to the inside
of the head unit.
2. Place the rear-shell face up on a clean
surface. Insert Samsung Tab A 10.4 and plug
in micro usb charge cable. Screw down white
keepers using the 4 torx screws and silver L
key provided.
CLEANING INSTRUCTIONS