Lilitab TableTop Assembly Instructions v2.0 3
SEMI-PERMANENT AND MOBILE BASE ASSEMBLY
B: TableTop Base Semi-Permanent: Apply
the four (4) VHB Tape Strips to the four
(4) landing strips on the underside of the
Tabletop Base as shown.
2. TableTop Base Installation. Choose one:
A: TableTop Base Mobile: Insert the four
(4) Silicone Bumpers into the four (4)
recessed holes on the underside of the
Tabletop Base as shown.
B
A
Refer to your Lilitab Head Unit owner’s
manual for tablet installation instructions.
1. Attach Mount. Line up the bottom of the
TableTop Mount with the four (4) screw
holes in the TableTop Base. Attach using the
provided L Key and the four (4) M4 x 10mm
Base Screws.
BOLT THROUGH ASSEMBLY: WITH BASE
3. Bolt Through Installation. Attach to your
surface from underneath by using four
(4) M6 screws of appropriate length (not
included).
2. Attach Mount. Line up the bottom of the
TableTop Mount with the four (4) screw
holes in the TableTop Base. Attach using the
provided L Key and the four (4) M4 x 10mm
Base Screws.
1. Drill holes. Position on your surface and
use the four (4) openings shown as a
template to mark your drill points. You can
also use the mounting pattern on page 7.
Drill 8mm clearance openings through
your surface.
Refer to your Lilitab Head Unit owner’s
manual for tablet installation instructions.
