Lilliput PRO WIRELESS WS500 User manual

1

2
Important Safety Instructions
The device has been tested for conformance to safety regulations and
requirements, and has been certified for international use. However, like all
electronic equipment, the device should be used with care. Please read and
follow the safety instructions to protect yourself from possible injury and to
minimize the risk of damage to the unit.
Please do not place the display screen towards the ground to avoid scratching the LCD
surface.
Please avoid heavy impact.
Please do not use chemical solutions to clean this product. Simply wipe with a soft cloth
to keep clean of the surface.
Please do not place on uneven surfaces.
Please do not store the monitor with sharp, metallic objects.
Please follow the instructions and trouble-shooting to adjust the product.
Internal adjustments or repairs must be performed by a qualified technician.
Please keep user guide for future reference.
Please unplug the power if long-term no-use, or thunder weather.
Safety Disposal For Old Electronic Equipment
Please do not regard the old electronic equipment as municipal waste and do not incinerate
old electronic equipment. Instead please always follow local regulations and hand it over to
the applicable collection stand for safe recycling. Ensure that these waste materials can be
effectively disposed of and recycled to prevent our environment and families from negative
effects.

3
Accessories
1. Wireless Antenna 4pcs
2. USB-C Cable 1pc
3. Electronic User Manual 1pc

4
Content
1. Features.......................................................................................................... 5
2. Description ..................................................................................................... 6
3. Application ..................................................................................................... 8
4. Battery installation/removal............................................................................ 9
5. Menu............................................................................................................ 10
6. Specification................................................................................................. 11
7. APP Monitoring ............................................................................................ 12
8. Trouble Shooting........................................................................................... 13

5
1. Features
OLED display
Automatic frequency selection at high quality frequencies.
Transmission distance up to 500ft (150m).
Minimum latency up to 0.08s
Transmitter supports SDI and HDMI input.
Receiver supports SDI and HDMI output.
Connectable to mobile devices and supports APP monitoring.
Supports Sony NP-F series batteries as well as USB-C power.

6
2. Description
2-1 Transmitter
①Antenna connector (RP-SMA male) ②USB 5V ③HDMI input
④SDI input ⑤OLED screen ⑥＜Select button
⑦Menu/Confirm button ⑧＞Select button ⑨1/4” screw mount
⑩Power switch

7
2-2 Receiver
①Antenna connector (RP-SMA male) ②USB 5V ③HDMI output
④SDI output ⑤OLED screen ⑥＜Select button
⑦Menu/Confirm button ⑧＞Select button ⑨1/4” screw mount
⑩Power switch

8
3. Application
The connection process is shown in the diagram above. The camera and transmitter can be
connected via an SDI/HDMI cable. After receiving video signal, the receiver outputs to monitor
side via the SDI/HDMI cable.
APP monitoring allows for real-time monitoring as well as mobile device connection.
When the transmitter TX has HDMI and SDI input, the receiver RX output recognises the SDI
signal from the transmitter TX in priority and outputs the SDI signal from TX, and only
recognises the HDMI signal from the TX when the SDI signal is disconnected.
SDI/HDMI
input
SDI/HDMI
output
Transmitter
Receiver
Mobile device (IOS)
Monitor

9
4. Battery installation/removal
Battery mounting (compatible with Sony NP-F series batteries)
Battery removal

10
5. Menu
5-1 Power on the transmitter and receiver
5-2 Press and hold “>” select button to get the local QR code, install the app using your mobile
device, and then use the app to scan the QR code to connect.
QR code is shown as:
5-3 OLED screen
①Wireless signal: current wireless signal status.
② Wireless channel: wireless channel currently in use.

11
③ Transmitter/receiver device: show whether the device is a transmitter or a receiver.
④ Video signal display: currently connected wireless video signal, or no video signal.
⑤Battery level/DC input: displays the battery level and DC input information.
5-4 Open the menu
Press and hold the Menu/Confirm button to call out menu.
Then use the Select button to select the desired menu and press the Menu/Confirm
button for menu confirmation.
Setting
Pairing
Pairing: ON/OFF
Language
Chinese
English
Message
SSID
ID
Password
Version
Version Number
Scan(Only for RX)
Scan: ON/OFF
6. Specification
Display
1.3” OLED
Video
HDMI input
1080p
23.98/24/25/29.97/30/50/59.94/60fps
1080i 50/60fps
720p 50/60fps
3G-SDI input
HDMI output
3G-SDI output
Audio
48kHz 24-bit
Transmission
Latency
80ms (from transmitter to receiver, no signal
interference)
Frequency
5GHz
Transmission Power
17dBm
Transmission Range
500ft/150m (no signal interference)
Power
Power Supply
DC 5V
Power Consumption
≤3W
Environment
Working Temperature
0°C ~50°C
Storage Temperature
-20°C ~60°C
Dimension
Dimension (LWD)
113×65×29mm
Weight
TX: 200g / RX: 200g

12
7. APP Monitoring
1. Using an IOS device, download "Wireless video" from the Apple App Store (Android version
is not supported at the moment).
2. Press and hold the Select button to get the local QR code, then use a mobile device to scan
the QR code to connect.
① Back/Exit.
② Display settings: Brightness, contrast, sharpness and peaking focus and exposure
③ More settings: You can set the safety frame, greyscale and center mark.
④ Live stream.
⑤ Peaking focus shortcut on.
⑥ Exposure shortcut on.
⑦ Zoom shortcut: 1x, 2x and 4x can be set.
⑧ Recording.
⑨ Take a picture.

13
8. Trouble Shooting
1) Make sure that the transmitter and receiver are connected to the same channel.
2) Please check that antenna is correctly installed and locked in place.
3) Please check that the power supply battery or power supply cable is correctly connected.
4) Please check that the transmitter and receiver are successfully paired.
5) Please ensure that the HDMI / SDI connection is correct.
6) Please check if the device output format is compatible
7) If you experience video fluctuations, please manually switch to another channel.
Note: Specifications are subject to change without notice due to continuous efforts to improve
products and product features.