Linak Homeline HC40 Advanced Series User manual

HC40 Advanced | 2
Contents
Preface ������������������������������������������������������������������������������������������������������������������������������������������ 4
Terms of use ���������������������������������������������������������������������������������������������������������������������������������� 5
Important safety information ��������������������������������������������������������������������������������������������������������� 6
General safety instructions��������������������������������������������������������������������������������������������������������� 7
Only for EU markets������������������������������������������������������������������������������������������������������������������� 9
Only for Non EU markets ����������������������������������������������������������������������������������������������������������� 9
Misuse��������������������������������������������������������������������������������������������������������������������������������������� 9
Informations de sécurité importantes ������������������������������������������������������������������������������������������� 10
Consignes générales de sécurité ���������������������������������������������������������������������������������������������� 11
Seulement pour les marchés au sein de l´UE����������������������������������������������������������������������������� 13
Seulement pour les marchés hors UE ��������������������������������������������������������������������������������������� 13
Utilisation abusive�������������������������������������������������������������������������������������������������������������������� 13
Declarations��������������������������������������������������������������������������������������������������������������������������������� 14
EU Declaration of Conformity �������������������������������������������������������������������������������������������������� 14
UK Declaration of Conformity�������������������������������������������������������������������������������������������������� 15
Manufacturer’s declaration ������������������������������������������������������������������������������������������������������ 16
Warranty ������������������������������������������������������������������������������������������������������������������������������������� 17
Maintenance�������������������������������������������������������������������������������������������������������������������������������� 17
Batteries �������������������������������������������������������������������������������������������������������������������������������������� 18
HC40 FRAME™����������������������������������������������������������������������������������������������������������������������� 18
HC40 TWIST™ ������������������������������������������������������������������������������������������������������������������������ 19
Getting started ���������������������������������������������������������������������������������������������������������������������������� 20
Setting time and day���������������������������������������������������������������������������������������������������������������� 21
Screen saver ���������������������������������������������������������������������������������������������������������������������������� 22
Motion sensor ������������������������������������������������������������������������������������������������������������������������� 22
Demo mode and how to pair��������������������������������������������������������������������������������������������������� 23
Favourite positions����������������������������������������������������������������������������������������������������������������������� 24
Saving favourite positions �������������������������������������������������������������������������������������������������������� 24
Massage �������������������������������������������������������������������������������������������������������������������������������������� 27
Controlling massage���������������������������������������������������������������������������������������������������������������� 27
Setting a timer������������������������������������������������������������������������������������������������������������������������� 27
Changing massage mode �������������������������������������������������������������������������������������������������������� 28
Turning on/off the massage ����������������������������������������������������������������������������������������������������� 28
Adjusting intensity������������������������������������������������������������������������������������������������������������������� 29

HC40 Advanced | 3
MY BED menu ����������������������������������������������������������������������������������������������������������������������������� 30
ABOUT ������������������������������������������������������������������������������������������������������������������������������������ 31
ME ������������������������������������������������������������������������������������������������������������������������������������������ 32
ALARMS���������������������������������������������������������������������������������������������������������������������������������� 33
SLEEP TIMER���������������������������������������������������������������������������������������������������������������������������� 34
SHORTCUTS ���������������������������������������������������������������������������������������������������������������������������� 35
TIME & DAY����������������������������������������������������������������������������������������������������������������������������� 36
LANGUAGE ����������������������������������������������������������������������������������������������������������������������������� 37
CHILD LOCK���������������������������������������������������������������������������������������������������������������������������� 38
TORCH ������������������������������������������������������������������������������������������������������������������������������������ 39
Notifications �������������������������������������������������������������������������������������������������������������������������������� 40
Repairs����������������������������������������������������������������������������������������������������������������������������������������� 41
Disposal of LINAK products���������������������������������������������������������������������������������������������������������� 41
Disposal of batteries��������������������������������������������������������������������������������������������������������������������� 42
LINAK®application policy������������������������������������������������������������������������������������������������������������� 42
Contacts�������������������������������������������������������������������������������������������������������������������������������������� 43

HC40 Advanced | 4
Preface
Dear User,
We are delighted that you have chosen a LINAK®product�
LINAK systems are high-tech products based on many years of experience in the manufacture and
development of actuators, electric control boxes, controls, batteries, accessories and chargers�
This User Manual does not address the end user� It is intended as a source of information for the equipment
or system manufacturer only, and it will tell you how to install, use and maintain your LINAK electronics�
The manufacturer of the end product has the responsibility to provide a User Manual where relevant safety
information from this manual is passed on to the end user�
We are convinced that your LINAK product/system will give you many years of problem-free operation�
Before our products leave the factory, they undergo full function and quality testing� Should you,
nevertheless, experience problems with your product/system, you are always welcome to contact your
supplier�
LINAK subsidiaries and some distributors situated all over the world have authorised service centres, which
are always ready to help you� Locate you local contact information on the back page�
LINAK provides a warranty on all products, see Warranty�
This warranty, however, is subject to correct use in accordance with the specifications, maintenance being
done correctly, and any repairs being carried out at a service centre, which is authorised to repair LINAK
products�
Changes in installation and use of LINAK systems can affect their operation and durability� The products are
only to be opened by authorised personnel�
This User Manual has been written on the basis of the present technical knowledge� LINAK reserves the right
to carry out technical modifications and keeps the associated information updated�
LINAK A/S

HC40 Advanced | 5
Terms of use
LINAK®takes great care in providing accurate and up-to-date information on its products� However, the user
is responsible for determining the suitability of LINAK products for a specific application�
Due to continual development, LINAK products are subject to frequent modifications and changes� LINAK
reserves the rights to conduct modifications, updates, and changes without any prior notice� For the same
reason, LINAK cannot guarantee the correctness and actual status of imprinted information on its products�
LINAK uses its best efforts to fulfil orders� However, for the reasons mentioned above, LINAK cannot
guarantee availability of any particular product at any given time� LINAK reserves the right to discontinue the
sale of any product displayed on its website or listed in its catalogues or in other written material created
and produced by LINAK, LINAK subsidiaries, or LINAK affiliates�
All sales are subject to the ‘Standard Terms of Sale and Delivery for LINAK A/S’ available on LINAK websites�
LINAK and the LINAK logotype are registered trademarks of LINAK A/S� All rights reserved�

HC40 Advanced | 6
Important safety information
Safe use of the system is possible only when the user manual are read completely and the instructions
contained are strictly observed�
Failure to comply with instructions marked with the ”NOTICE” symbol may result in serious damage to the
system or one of its components�
Read all instructions before using this product�
Important safety information on LINAK®products can be found under the following headings:
DANGER
Failure to comply with these instructions will result in severe personal injury�
WARNING
Failure to comply with these instructions may result in severe personal injury�
CAUTION
Failure to comply with these instructions can result in minor personal injury�
NOTICE
Failure to comply with these instructions can result in property damage�
READ AND SAVE THESE INSTRUCTIONS

HC40 Advanced | 7
General safety instructions
Safe use of the system is possible only when the operating instructions are read completely and the
instructions contained are strictly observed�
Failure to comply with instructions marked with the ”NOTE” symbol may result in serious damage to the
system or one of its components�
It is important for everyone who is to connect, install, or use the systems to have the necessary
information and access to this User Manual� Follow the instructions for mounting – risk of injury if
these instructions are not followed�
The appliance is not intended for use by young children or infirm persons without supervision�
If there is visible damage on the product it must not be installed�
Note that during construction of applications, in which the actuator is to be fitted, there must be
no possibility of personal injury, for example squeezing of fingers or arms�
Assure free space for movement of application in both directions to avoid blockade�
The appliance is only to be used with the power supply unit provided with the appliance�
Safety issues
The builder of the equipment shall ensure that the use of the component complies with relevant
standards – like the Machine Directive� Care must be taken to avoid squeezing of cables as it can
cause movement of the system!

HC40 Advanced | 8
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired
operation
• Statement – for all intentional and unintentional radiators:
Changes or modifications not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment�
• Statement for digital devices for Class B:
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules� These limits are designed to provide reasonable
protection against harmful interference in a residential installation� This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions it may cause harmful interference to radio communications� However, there is
no guarantee that interference will not occur in a particular installation� If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
- Reorient or relocate the receiving antenna�
- Increase the separation between the equipment and the receiver�
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected�
- Consult the dealer or an experienced radio/ TV technician for help�
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science
and Economic Development Canada’s licence-exempt RSS(s)�
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired
operation of the device�
Labeling Requirements:
This Class B digital apparatus complies with Canadian ICES-003 / NMB-003�

HC40 Advanced | 9
Only for EU markets
This appliance can be used by children aged from 8 years and above and persons with reduced
physical, sensory or mental capabilities or lack of experience and knowledge if they have given
supervision or instruction concerning use of the appliance in a safe way and understand the
hazards involved�
Children shall not play with the appliance� Cleaning and user maintenance shall not be made by
children without supervision�
Only for Non EU markets
Persons who do not have the necessary experience or knowledge of the product/products
must not use the product/products� Besides, persons with reduced physical, sensory or mental
abilities must not use the product/products, unless they are under surveillance or they have been
thoroughly instructed in the use of the apparatus by a person who is responsible for the safety of
these persons�
Moreover, children must be under surveillance to ensure that they do not play with the product�
Misuse
Do not overload the actuators – this can cause danger of personal injury and damage to the
system�
Do not use the actuator system for lifting persons� Do not sit or stand on a table while operating –
risk of personal injury�
Do not use the system in environments other than the intended indoor use�

HC40 Advanced | 10
Informations de sécurité importantes
Une utilisation sûre du système n’est possible que lorsque le manuel d’utilisation est lu dans son intégralité
et que les instructions qu’il contient sont strictement respectées�
Le non-respect des instructions marquées du symbole “AVIS” peut entraîner de graves dommages au
système ou à l’un de ses composants�
Lisez toutes les instructions avant d’utiliser ce produit�
Des informations de sécurité importantes sur les produits LINAK®peuvent être trouvées sous les rubriques
suivantes :
DANGER
Le non-respect de ces instructions entraînera des blessures graves�
AVERTISSEMENT
Le non-respect de ces instructions peut entraîner des blessures graves�
AVERTIR
Le non-respect de ces instructions peut entraîner des blessures corporelles mineures�
AVIS
Le non-respect de ces instructions peut entraîner des dommages matériels�
LIRE ET CONSERVER CES INSTRUCTIONS

HC40 Advanced | 11
Consignes générales de sécurité
Le non respect de ces instructions peut entraîner des accidents impliquant des blessures graves�
Ne pas suivre ces instructions peut entraîner l´endommagement ou destruction du produit�
L´utilisation en toute sécurité du système n´est possible que si l´intégralité des instructions ont été lues et ont
été strictement suivies�
Le non respect de se conformer aux instructions marquées du symbole “note” peut entraîner de
graves dommages au système ou à un de ses composants�
Il est important pour tout individu qui connecte, installe, ou utilise le système d´avoir les
informations nécessaires et l´accès à ce mannuel d´utilisation�
Suivez les instructions pour le montage – risque de blessure si ces instructions ne sont pas suivies�
L´appareil n´est pas destiné à être utilisé par des enfants ou des personnes handicapées sans
surveillance�
S´il y a des dommages visibles sur le produit, l´installation ne doit pas être effectuée�
Prendre en compte lors de la construction du matériel, dans lequel l´actionneur est incorporé, qu´il
ne doit y avoir aucune possibilité de blessures corporelles, telles que la compression des doigts ou
des bras�
Assurez un espace libre autours du materiel pour éviter tout blocage�
L’application ne doit être utilisée qu’avec le module d’alimentation secteur fourni�
Sujet de sécurité
Le constructeur de l’équipement doit s’assurer que l’utilisation du composant conforme aux
normes en vigueur, comme la Directive Machines� Les soins doivent être prises pour éviter de pincer
les câbles car cela pourrait entraîner des mouvements du système!

HC40 Advanced | 12
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR
d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio
exempts de licence�
(1) l’appareil nedoit pas produire de brouillage, et
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d’en compromettre le fonctionnement�
Etiquetage obligatoire
Cet appareil numérique de la classe B est conforme à la norme ICES-003 / NMB-003 du Canada�
• Déclaration - concernant les sources d’émissions électromagnétiques:
Les changements ou modifications non expressément approuvés par la partie responsable de la
conformité pourrait annuler le droit de l’utilisateur à faire fonctionner l’équipement�
• Déclaration pour les équipements numériques de Classe B:
NOTE: Cet équipement a été testé et jugé conforme aux normes pour un appareil électronique
de classe B, conformément à la partie 15 du règlement de la FCC� Ces normes sont établies
pour fournir une protection raisonnable contre les interférences nuisibles dans une installation
résidentielle� Cet équipement génère, utilise et peut émettre des fréquences radio et, s’il n’est
pas installé et utilisé conformément aux instructions, il peut causer des interférences nuisibles aux
communications radio� Cependant, nous ne pouvons pas garantir l’absence d’interférences dans
une installation particulière� Si cet équipement cause des interférences nuisibles à la réception
d’un poste radio ou d’un téléviseur, ce qui peut être déterminé en mettant l’équipement hors et
sous tension, l’utilisateur doit essayer de corriger l’interférence par une ou plusieurs des mesures
suivantes:
- Réorientez ou déplacez l’antenne de réception�
- Augmentez la séparation entre l’équipement et le récepteur�
- Connectez l’équipement sur un circuit différent de celui utilisé par le récepteur�
- Faites appel à un revendeur ou un technicien Radio/TV expérimenté�
Cet appareil est pleinement conforme à la section 15 des
réglementations FCC.
Le fonctionnement est sujet aux deux conditions suivantes:
(1) Cet appareil ne doit pas causer d’interférences
dangereuses, et
(2)
cet appareil doit supporter les interférences, y compris
celles pouvant provoquer un fonctionnement non désiré

HC40 Advanced | 13
Seulement pour les marchés au sein de l´UE
Cet appareil peut-être utilisé par des enfants âgés de 8 ans et plus, ainsi que les personnes dont les
capacités physiques, sensorielles ou mentales sont réduites ou ayant un manque d´expérience et de
connaissance si elles ont bénéficié d´une surveillance ou d´instructions concernant l´utilisation de
l´appareil en toute sécurité et compris les risques encourus�
Les enfants ne doivent pas jouer avec l´appareil� Le nettoyage et l´entretien ne doivent pas être
rèalisés par des enfants sans surveillance�
Seulement pour les marchés hors UE
Les personnes qui n´ont pas l´expérience ou les connaissances nécessaires sur le ou les produit(s)
ne doivent pas le ou les utiliser� Par ailleurs, les personnes ayant des capacités physiques,
sensorielles ou mentales réduites ne doivent pas utiliser le ou les produit(s), sauf si elles sont sous
surveillance ou ont suivi une formation approfondie de l´utilisation de l´appareil par l´individu
responsable de la securité de ces personnes�
De plus, les enfants doivent-être sous surveillance afin de s´assurer qu´ils ne jouent pas avec le
produit�
Utilisation abusive
Ne surchargez pas les actionneurs – cela peut engendrer un risque de blessures corporelles et
endommager le système�
Ne pas utiliser les actionneurs pour soulever des personnes� Ne pas s´asseoir ou se tenir debout sur
une table en fonctionnement – risque de blessures�
Ne pas utiliser le système dans dans des environnements autres que l´utilisation intérieure prévue�

HC40 Advanced | 14
Declarations
EU Declaration of Conformity
EU DECLARATION OF CONFORMITY
LINAK A/S
Smedevænget 8
DK - 6430 Nordborg
hereby declares under our sole responsibility that LINAK actuator system items
Wireless accessory: BLE2LIN
Wireless handset: HC05BL, HC10BL, HC1ABL, HC10ECO, HC2xBL, HC30BL, HC40BL, BP10BL, DPG1B, DPG1C,
DPG1M, DPI-C
complies with the Radio Equipment Directive (RED) 2014/53/EU (OJ L 153, 22.5.2014, p. 62–106) according to the
standard:
Art.3.1 (a) Safety:
EN 62368-1:2014+A11:2017 (Harmonized to LVD)
Art.3.1 (a) Health:
EN 62479:2010 (Harmonized to LVD)
EN 50663:2017
Art. 3.1(b) EMC:
ETSI EN 301 489-1 V2.2.3;
ETSI EN 301 489-17 V3.2.4
Art. 3.2 Radio:
ETSI EN 300 328 V2.2.2
complies with Directive 2011/65/EU of the European Parliament and of the Council of 8 June 2011 on the restriction
of the use of certain hazardous substances in electrical and electronic equipment (OJ L 174, 1.7.2011, p. 88–110)
and Directive 2015/863 (OJ L 137, 4.6.2015, p. 10–12) (amending Annex II to Directive 2011/65/EU) according to the
standard:
EN IEC 63000:2018
Nordborg, 2023-05-02

HC40 Advanced | 15
UK Declaration of Conformity
UK DECLARATION OF CONFORMITY
LINAK A/S
Smedevænget 8
DK - 6430 Nordborg
hereby declares under our sole responsibility that LINAK Actuator System items:
Wireless accessory: BLE2LIN
Wireless handset: HC05BL, HC10BL, HC1ABL, HC10ECO, HC2xBL, HC30BL HC40BL, BP10BL, DPG1B, DPG1C,
DPG1M, DPI-C
Complies with Radio Equipment Regulations 2017 according to following standards:
Safety Reg. 6(1)(a):
BS EN 62368-1:2014+A11:2017
Health Reg. 6(1)(a):
BS EN 62479:2010;
EN 50663:2017
EMC Reg. 6(1)(b):
ETSI EN 301 489-1 V2.2.3;
ETSI EN 301 489-17 V3.2.4
Radio Reg. 6(2):
ETSI EN 300 328 V2.2.2
complies with The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic
Equipment Regulations 2012 according to the standard:
BS EN IEC 63000:2018
Nordborg, 2023-05-02

HC40 Advanced | 16
Manufacturer’s declaration
DECLARATION OF INCORPORATION OF PARTLY COMPLETED MACHINERY
2006/42/EC ANNEX II B
LINAK A/S
Smedevænget 8
DK - 6430 Nordborg
Herewith declares that LINAK HOMELINE® products as characterized by the following models and
types:
Control Boxes CB9H, CBH Advanced, CBH Basic
Linear Actuators LA27, LA29, LA31 HOMELINE
Dual Actuators TD3, TD4, TD5
Controls HB10 RF, HB20RF, HB60, HC10, HC10RF, HC20RF, HC40
Accessories Bluetooth Adapter, DC CONNECTOR, LED Lightbox, Lightplug001, Massage
Motor, SMPS001, SMPS001, SMPS002, SMPS006
comply with the following parts of the Machinery Directive 2006/42/EC, ANNEX I, Essential health and
safety requirements relating to the design and construction of machinery:
1.5.1 Electricity supply
The relevant technical documentation is compiled in accordance with part B of Annex VII and that this
documentation or part hereof will be transmitted by post or electronically to a reasoned request by the
national authorities.
This partly completed machinery must not be put into service until the final machinery into
which it is to be incorporated has been declared in conformity with the provisions of the
Machinery Directive 2006/42/EC where appropriate.
Nordborg, 2019-10-21
LINAK A/S
John Kling, B.Sc.E.E.
Regulatory Affairs Manager
Authorized to compile the relevant technical documentation
Original Declaration
Use the HC40BL in an environment with temperature between -10 and +50 ºC� Otherwise, the HC40BL may
be damaged� It can be operated at altitudes up to 2000 m�
Hereby, LINAK A/S declares that the radio equipment type HC40BL is compliant with Directive 2014/53/EU�
Caution:
For battery: Risk of explosion if the battery is replaced with an incorrect type�
Dispose of used batteries according to local regulations�
Operating Frequency Range The maximum RF Output Power
2402 - 2480 MHz -9�81 dBm EIRP

HC40 Advanced | 17
Warranty
This HOMELINE®product is subject to warranty pursuant to the terms of the LINAK® HOMELINE Warranty
Paper�
Do not expose to direct sunlight�
Maintenance
Clean dust and dirt on the outside of the system at appropriate intervals and inspect them for damage and breaks�
Inspect the connections, cables and plugs and check for correct functioning as well as fixing points�
The cleaners and disinfectants must not be highly alkaline or acidic (pH value must be 6-8)�

HC40 Advanced | 18
HC40 FRAME™
The hand control needs two AAA batteries�
1� Press the button located inside the oval arch at the bottom of the hand control� Take off the battery
lid�
2� Put in the new batteries as indicated in the housing�
We recommend using alkaline batteries� Using another type of batteries can lead
to unintended restart of the hand control�
3� Reattach the battery lid by placing the lower end of the lid and then press below the ‘down’ button�
After insertion of the batteries in the HC40, a start-up logo appears for 5 seconds�
Batteries

HC40 Advanced | 19
HC40 TWIST™
The hand control needs two AAA batteries�
1� Open the battery lid on the front of the HC40, by pressing and sliding it in the opposite direction of
the keypad�
2� Put in the new batteries as indicated in the housing�
We recommend using alkaline batteries� Using another type of batteries can lead
to unintended restart of the hand control�
3� Reattach the battery lid by placing it back on the hand control and then slide it on in the direction
towards the keypad�
After insertion of the batteries in the HC40, a start-up logo appears for 5 seconds�

HC40 Advanced | 20
Navigation
The HC40 has ten buttons� The picture below explains the functionality of the buttons:
Button 1
- refers to text
in display
Simultaneous
drive down
Move left
in menu Move right in menu
Control reference down or
move down in menu
Control reference up or
move up in menu
Turn on/off Under Bed Light
Select button
Button 2
- refers to text in display
Button 3
- refers to text in display
06:40
BACK
MENUALARM
Battery indicator
Indicates screen
options to the right
Text above button 3
Time
Indicates screen
options to the left
Text above
button 1
Sleep timer on
Alarm on
Screen elements
Button 1
- refers to text
in display
Simultaneous
drive down
Move left
in menu Move right in menu
Control reference down or
move down in menu
Control reference up or
move up in menu
Turn on/off Under Bed Light
Select button
Button 2
- refers to text in display
Button 3
- refers to text in display
06:40
BACK
MENUALARM
Battery indicator
Indicates screen
options to the right
Text above button 3
Time
Indicates screen
options to the left
Text above
button 1
Sleep timer on
Alarm on
Menu colours:
White References
Blue Favourite positions
Green Massage control
Orange My bed menu
Getting started
Other manuals for Homeline HC40 Advanced Series
1
Table of contents
Other Linak Remote Control manuals