Lincoln A Series User manual

Section
Page
-A50
Copyright 2001
Printed in U.S.A.
One Lincoln Way
St. Louis, Missouri 63120-1578
[phone]
Model 85300
HYDRAULIC MOTOR
Series "A"
- 87C
APRIL - 01 FORM 403146
It is the responsibility of the Owner/Operator to properly use
and maintain this equipment.
The instructions and Warnings contained in this manual
shall be read and understood by the Owner/Operator prior
to operating this equipment.
It is the responsibility of the Owner/Operator to maintain the
legibility of all Warning and Instruction labels.
The Owner/Operator shall retain this manual for future
reference to important Warnings, Operating and
Maintenance instructions.
DO NOT exceed the stated maximum working pressure of the
hydraulic motor or of the lowest rated component in your
system.
DO NOT alter or modify any part of this equipment.
DO NOT operate this equipment with combustible fluids.
DO NOT attempt to repair or disassemble the equipment while
the system is pressurized.
TIGHTEN all fluid connections securely before using this
equipment.
ALWAYS read and follow the fluid manufacturer's
recommendations regarding fluid compatibility, and the use of
protective clothing and equipment.
CHECK all equipment regularly and repair or replace worn or
damaged parts immediately.
IMPORTANT: Failure to heed these warnings including misuse,
over pressurizing, modifying parts, using incompatible chemicals
and fluids, or using worn or damaged parts, may result in
equipment damage and/or serious personal injury, fire,
explosion, or property damage.
U.S. Patent #5,465,646
Pump Type Pump Tube Ratio Maximum
DeliveryPressure Maximum Hydraulic Inlet Pressure
POWER- 84981
Master 84982
III 84983
84984 1.5:1 2250 psi (155 bar)
84985
84986
84987
84976 2.5:1 3750 psi (258 bar) 1500 psi (103 bar)
84977
84978 4:1 6000 psi (412 bar)
84979
84991 3:1 4500 psi (310 bar)
84992
84993 4.5:1 6750 psi (466 bar)
84994
84995 5:1 7500 psi (517 bar)
84996
84997 7:1 7000 psi (483 bar) 1000 psi (69bar)
84998
PILE 84900 0.8:1 1200 psi (83 bar)
DRIVER 84901 1:1 1500 psi (103 bar)
III 84902 1.5:1 2250 psi (155 bar)
84904 1:1 1500 psi (103 bar) 1500 psi (103 bar)
84921 0.4:1 600 psi (41 bar)
84922
84923 0.2:1 300 psi (21 bar)

Page 2 Form 403146

Torque to
30-35 Ft. Lbs.
Torque to 32-
38 ft lbs.
Torque to
23-27 ft lbs.
Form 403146 Page 3
Use Loctite #242 Blue
on threads.©
© Indicates change

RETAIN THIS INFORMATION FOR FUTURE REFERENCE
When ordering replacement parts, list: Part Number, Description, Model Number and Series Letter.
LINCOLN provides a Distributor Network that stocks equipment and replacement parts.
Page 4 Form 403146