Linear ANALOG DEVICES EZ-PD CCG3 Quick setup guide

SYMBOL PARAMETER CONDITIONS MIN TYP MAX UNITS
VIN DC2654A Input Voltage Range 5 20 V
VOUT DC2654A Output Voltage Range 5 20 V
IOUT DC2654A Output Current 5 A
1
DEMO MANUAL DC2654A
Rev. 0
DESCRIPTION
EZ-PD CCG3
USB-C Power Delivery Manager Daughter Board
Demonstration circuit 2654A features the EZ-PD™
CCG3 USB Type-C Port Controller IC designed by
Cypress Semiconductor. This product is a daughter
board meant to interface with some of Analog Devices’
powerproduct demonstration circuits in order to dem -
onstrate their compatibility with the USB Type-C Power
Delivery specification.
All registered trademarks and trademarks are the property of their respective owners.
PERFORMANCE SUMMARY
BOARD PHOTO
The default program for this board negotiates a USB
Power Delivery profile and chooses the highest voltage
advertised by the power adapter plugged into the board,
then turns on the power switches to power the main PCB
through the banana plugs for a low-impedance connec-
tion. Any required digital information is passed between
boards through header J3.
Design files for this circuit board are available.
Specifications are at TA= 25°C

Refer to Figure1, Figure2 and Figure3 for the proper
equipment setup. Follow the procedure below to familiar-
ize yourself with the DC2654A.
STANDALONE PROCEDURE
1. Connect a voltmeter (VM1) across the VOUT and
GNDturrets.
2. Plug your USB Type-C power adapter into J1 on the
DC2654A.
3. Observe the voltage on VM1 go to 5V and then to the
negotiated voltage (if there is one). The LED on the
DC2654A will light as soon as power is delivered to
the VM1 node.
DEMO BOARD PROCEDURE
1. If the demo board is designed to interface with
DC2654A, follow any instructions in that board’s demo
manual before continuing. If you need to program the
DC2654A, refer to the Programming Instructions sec-
tion in this manual.
If the board is not designed to interface with DC2654A,
you can continue, but be sure that the adapter used does
not offer a higher profile than the board canwithstand.
2. Connect a voltmeter (VM1) across the VOUT and
GNDturrets. Connect DC2654A to the demo board
under test.
4. Plug your USB Type-C power adapter into J1 on
theDC2654A.
5. Observe the voltage on VM1 go to 5V and then to the
negotiated voltage (if there is one). The LED on the
DC2654A will light as soon as power is delivered to
the VM1 node.
Figure1. DC2038A is a Battery Charger Demo Board for
the LTC4162 Designed to Interface with DC2654A.
Figure2. DC2654AMounted Onto DC2038A
Figure3. The Banana Plugs and Header on DC2654AWill
Fit Snugly Into Compatible Demo Boards.
2
DEMO MANUAL DC2654A
Rev. 0
QUICK START PROCEDURE

DEFAULT PROGRAM
The factory-default program on DC2654A is based on
the CYPD3125-40LQXI_notebook example project that
comes with the EZ-PD CCG3 SDK. The main differences
are the addition of variable sink power profile and the
operation of the on-board LED. The LED (D1) operates
as shown in Table 1.
Table1. LED (D1) Operation
LED STATE BOARD STATUS
Off Power Switches Off, Load Has No Power
On Power Switches On, Load Has at Least 5V
Blinking SMBAlert Is Asserted Low
SOURCE MOSFETs
Components M5, M6, R8, and R9 are left unpopulated
by default, making DC2654A operate as a sink-only
device. In order to operate as a source, these compo-
nents can be purchased separately and installed to the
relevant footprints. Table 2 shows the part numbers for
these components.
Table2. Part Number for Source Components
COMPONENT MANUFACTURER PART NUMBER
M5, M6 Toshiba SSM6K513NU, LF
R8, R9 Any 10MΩ 0402
Resistor
USE WITH CUSTOM DESIGNS
While in the early design phase, it may be helpful to simply
use DC2654A as a simple breakout board for the EZ-PD
CCG3. The banana plug outputs have an industry-stan-
dard spacing which can serve as an input to many boards
with banana jacks. This may serve as a simple way to con-
nect any board to a wall outlet using any USB-C adapter.
This spacing as well as spacing for the header that mates
with J3, can be copied from gerbers for any demo boards
compatible with DC2654A (such as DC2038A).
Software to interface with specific demo boards can be
found on the DC2654A product page. Follow any instruc-
tions within those software downloads to program the
DC2654A with application-specific firmware examples.
The generic software, which just passes a USB-C adapt-
er’s highest available voltage to a sink, is also available
from the DC2654A product page.
MiniProg3 PROGRAMMER/DEBUGGER
To program DC2654A, you will need a MiniProg3 Pro-
grammer/Debugger. This can be used for uploading a
hex file as well as programming and debugging your
own project. The MiniProg3 can be purchased through
Cypress Semiconductor’s website or third-party distribu-
tors. The 5-pin header on the MiniProg3 connects to J2
on DC2654A as shown below. The CCG3 can be repro-
grammed in-circuit with or without USB power applied.
EZ-PD SOFTWARE DEVELOPMENT KIT
After acquiring a MiniProg3 debugger, download the
EZ-PD SDK for CCG3. Be sure to consult the instructions
in the firmware download for the demo board that you will
be interfacing with to determine the version of the SDK
that should be used.
3
DEMO MANUAL DC2654A
Rev. 0
Figure4. MiniProg3 Connected to DC2654A for Programming and Debugging
BOARD OPERATION
PROGRAMMING INSTRUCTIONS

PSoC PROGRAMMER
The quickest way to upload an existing program to the
DC2654A is to upload the HEX file using PSoC Program-
mer software from Cypress Semiconductor. The HEX file
is included in the top-level directory of the DC2654A firm-
ware package hosted on the product page of any compat-
ible demo board. See Figure5 for the proper program-
ming configuration.
PSoC CREATOR
DC2654A source code can be also programmed and
debugged using the PSoC Creator IDE. Firmware down-
loads include source code and a PSoC Creator project
which can be easily uploaded to the DC2654A. From there,
users can modify the code to fit their own requirements
and program/debug as necessary.
To program DC2654A once a project has been down-
loaded, launch PSoC Creator and click the Program button
(or Ctrl + F5). This will launch the Select Debug Target dia-
log as shown in Figure6. Click the Port Setting button and
verify that the settings match those shown in Figure7.
Ensure that the computer is connected to the MiniProg3
and that the MiniProg3 is connected to the DC2654A.
In the Select Debug Target dialog, click the Port Acquire
button, and then the Connect button once acquired. Press
OK to program the target board.
For further instructions, consult PSoC Creator docu-
mentation.
Figure5. PSoC Programmer Settings
4
DEMO MANUAL DC2654A
Rev. 0
PROGRAMMING INSTRUCTIONS

Figure6. Select Debug Target Dialog
Figure7. Port Setting Dialog
5
DEMO MANUAL DC2654A
Rev. 0
PROGRAMMING INSTRUCTIONS

Figure8. CY4500 EZ-PD Protocol Analyzer Connected Between the DC2654A and a USB PD Wall Adapter
6
DEMO MANUAL DC2654A
Rev. 0
PROTOCOL ANALYZER
The CY4500 EZ-PD Protocol Analyzer from Cypress
Semiconductor can be used to monitor the USB PD nego-
tiation. This is useful for debugging and understanding
the data that is being passed between the USB PD adapter
and the board under test.
The adapter can be connected between the USB PD source
providing power and the DC2654A as shown in Figure8.
The micro USB port is then connected to a computer
to monitor the data through the supporting GUI from
Cypress Semiconductor. Visit the CY4500 product page
for more information.
Figure9 shows the negotiation from a power supply
offering 3 Power Data Objects (PDOs): 5V/3A, 9V/3A,
and 12V/2.25A.

Figure9. Decoded Data from the Protocol Analyzer GUI Showing the Power Data Objects (PDOs) Offered
7
DEMO MANUAL DC2654A
Rev. 0
PROTOCOL ANALYZER

8
DEMO MANUAL DC2654A
Rev. 0
PARTS LIST
ITEM QTY REFERENCE PART DESCRIPTION MANUFACTURER/PART NUMBER
Required Circuit Components
1 3 C1, C2, C9 CAP., 1µF, X5R, 35V, 10%, 0402 MURATA, GRM155R6YA105KE11D
2 2 C3, C4 CAP., 390pF, COG, 50V, 5%, 0402 AVX, 04025A391JAT2A
3 1 C5 CAP., 0.1µF, X7R, 25V, 10%, 0402 AVX, 04023C104KAT2A
4 3 C6-C8 CAP., 2.2µF, X5R, 6.3V, 10%, 0402 AVX, 04026D225KAT2A
5 1 D1 LED,GREEN, WATER CLEAR, 0603 LITE-ON, LTST-C190KGKT
6 2 M1, M2 XSTR., MOSFET N-CH, 30V, 15A, UDFN-B EP TOSHIBA, SSM6K513NU,LF
7 2 M3, M4 XSTR., MOSFET, DUAL N-CH, 0.28A, SOT-563 DIODES INC., 2N7002VAC-7
8 2 R1, R2 RES., 10MΩ, 5%, 1/16W ,0402 VISHAY, CRCW040210M0JNED
9 1 R3 RES., 1k, 1%, 1/16W, 0402, AEC-Q200 VISHAY, CRCW04021K00FKED
10 2 R4, R5 RES., 10k, 1%, 1/16W, 0402 SAMSUNG, RC1005F103CS
11 1 R6 RES., 100k, 1%, 1/10W, 0402, AEC-Q200 KOA SPEER, RK73H1ETTP1003F
12 1 R7 RES.,200Ω, 5%, 1/2W, 0805, AEC-Q200 PANASONIC, ERJP06J201V
13 1 U1 IC, USB TYPE-C PORT CONTROLLER, 40-PIN QFN CYPRESS, CYPD3125-40LQXIT
Hardware
1 2 E1, E2 TEST POINT, TURRET, 0.094" MTG. HOLE, PCB 0.062" THICK MILL-MAX, 2501-2-00-80-00-00-07-0
2 2 E3, E4 CONN., PLUG BANANA, MALE,INTERNAL THREAD KEYSTONE, 6072
3 1 J1 CONN., USB 3.1, RCPT, 24POS, 0.5mm, SMD RA MOLEX, 1054500101
4 1 J2 CONN., HEADER, MALE PIN, 5 POS, 2.54mm, ST THT TE CONNECTIVITY, 640456-5
5 1 J3 CONN., HEADER, MALE, 16 POS, 1.27mm, VERT TALL SAMTEC, FW-08-05-L-D-315-100

9
DEMO MANUAL DC2654A
Rev. 0
Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog
Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications
subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
SCHEMATIC DIAGRAM
5
5
4
4
3
3
2
2
1
1
D D C C B B A A
REVISION HISTORY
ECO REV DESCRIPTION APPROVED DATE
-03 PRODUCTION ZP 06-04-19
USB-C POWER DELIVERY MANAGER DAUGHTER BOARD
GND
PCA ADDITIONAL PARTS
5V-20V
MINIPROG
5V-20V, 5A MAX
OPT OPT
10M10M
VOUT
V3P3 V3P3
V3P3
V3P3
V3P3
V3P3
VOUT
DATE:
IC NO.
SHEET OF
TITLE: DEMO CIRCUIT SCHEMATIC,
APPROVALS
PCB DES. APP ENG.
CUSTOMER NOTICE
LINEAR TECHNOLOGY HAS MADE A BEST EFFORT TO DESIGN A CIRCUIT THAT MEETS CUSTOMER-SUPPLIED SPECIFICATIONS; HOWEVER, IT REMAINS THE CUSTOMER'S RESPONSIBILITY TO VERIFY PROPER AND RELIABLE OPERATION IN THE ACTUAL APPLICATION. COMPONENT SUBSTITUTION AND PRINTED CIRCUIT BOARD LAYOUT MAY SIGNIFICANTLY AFFECT CIRCUIT PERFORMANCE OR RELIABILITY. CONTACT LINEAR TECHNOLOGY APPLICATIONS ENGINEERING FOR ASSISTANCE. THIS CIRCUIT IS PROPRIETARY TO LINEAR TECHNOLOGY AND SUPPLIED FOR USE WITH LINEAR TECHNOLOGY PARTS. SCALE = NONE
SIZE: N/A
SKU NO. SCHEMATIC NO. AND REVISION:
PCA BOM: PCA ASS'Y:
www.linear.com
Phone: [phone]
www.analog.com
11
NC ZP
N/A
DC2654A 710-DC2654A_REV03
705-DC2654A_REV03
Tuesday, June 04, 2019
700-DC2654A_REV03
DATE:
IC NO.
SHEET OF
TITLE: DEMO CIRCUIT SCHEMATIC,
APPROVALS
PCB DES. APP ENG.
CUSTOMER NOTICE
LINEAR TECHNOLOGY HAS MADE A BEST EFFORT TO DESIGN A CIRCUIT THAT MEETS CUSTOMER-SUPPLIED SPECIFICATIONS; HOWEVER, IT REMAINS THE CUSTOMER'S RESPONSIBILITY TO VERIFY PROPER AND RELIABLE OPERATION IN THE ACTUAL APPLICATION. COMPONENT SUBSTITUTION AND PRINTED CIRCUIT BOARD LAYOUT MAY SIGNIFICANTLY AFFECT CIRCUIT PERFORMANCE OR RELIABILITY. CONTACT LINEAR TECHNOLOGY APPLICATIONS ENGINEERING FOR ASSISTANCE. THIS CIRCUIT IS PROPRIETARY TO LINEAR TECHNOLOGY AND SUPPLIED FOR USE WITH LINEAR TECHNOLOGY PARTS. SCALE = NONE
SIZE: N/A
SKU NO. SCHEMATIC NO. AND REVISION:
PCA BOM: PCA ASS'Y:
www.linear.com
Phone: [phone]
www.analog.com
11
NC ZP
N/A
DC2654A 710-DC2654A_REV03
705-DC2654A_REV03
Tuesday, June 04, 2019
700-DC2654A_REV03
DATE:
IC NO.
SHEET OF
TITLE: DEMO CIRCUIT SCHEMATIC,
APPROVALS
PCB DES. APP ENG.
CUSTOMER NOTICE
LINEAR TECHNOLOGY HAS MADE A BEST EFFORT TO DESIGN A CIRCUIT THAT MEETS CUSTOMER-SUPPLIED SPECIFICATIONS; HOWEVER, IT REMAINS THE CUSTOMER'S RESPONSIBILITY TO VERIFY PROPER AND RELIABLE OPERATION IN THE ACTUAL APPLICATION. COMPONENT SUBSTITUTION AND PRINTED CIRCUIT BOARD LAYOUT MAY SIGNIFICANTLY AFFECT CIRCUIT PERFORMANCE OR RELIABILITY. CONTACT LINEAR TECHNOLOGY APPLICATIONS ENGINEERING FOR ASSISTANCE. THIS CIRCUIT IS PROPRIETARY TO LINEAR TECHNOLOGY AND SUPPLIED FOR USE WITH LINEAR TECHNOLOGY PARTS. SCALE = NONE
SIZE: N/A
SKU NO. SCHEMATIC NO. AND REVISION:
PCA BOM: PCA ASS'Y:
www.linear.com
Phone: [phone]
www.analog.com
11
NC ZP
N/A
DC2654A 710-DC2654A_REV03
705-DC2654A_REV03
Tuesday, June 04, 2019
700-DC2654A_REV03
C2 1uF 35V
C6 2.2uF 6.3V
TP23
TP7
E1
TP19
TP17
R3 1k
J2
1 3 2 4 5
TP9
M3A 2N7002VAC-7
TP29
R6 100k
U1
CYPD3125-40LQXIT
VBUS_P_CTRL1
1
VBUS_P_CTRL0
2
CC2
3
V5V
4
CC1
5
VCONN
6
P1.0
7
P1.1
8
P1.2
9
P1.3
10
VBUS_P 40
OC 39
P3.6 38
P3.5 37
P3.4 36
P3.3 35
P3.2 34
VSS 33
VBUS_DISCH 32
VBUS 31
41
VSS
VBUS_C_CTRL0 30 VBUS_C_CTRL1 29
P0.1 28 P0.0 27
XRES 26
P2.6 25 P2.5 24 P2.4 23
D- 22
D+ 21
AUX_P / P1.6
11
SBU1 / P1.4
12
SBU2 / P1.5
13
AUX_N / P1.7
14
P2.0
15
P2.1
16
VDDD
17
VDDIO
18
VCCD
19
VSYS
20
TP1
LB1 LABEL
M4B 2N7002VAC-7
R5 10k
E4
M2
SSM6K513NU
PCB1 PCB,DC2654A REV03
C5 0.1uF 25V
TP18
M1
SSM6K513NU
TP11
R7 200
5%
1/2W
0805
TP22
TP5
E2
TP8
R2
10M
C3
390pF
TP2
TP26
C4
390pF
C1 1uF 35V
M4A 2N7002VAC-7
D1 GREEN
C8 2.2uF 6.3V
TP28
TP15
R8 OPT
M3B 2N7002VAC-7
TP13
R1
10M
C9
1uF
35V
TP25
M5
SSM6K513NU
TP24
J3
FW-08-05-L-D-315-100
1 2 3 4 5 6 7 8 9 10
11 12 13 14 15 16
TP21
STNCL1 TOOL, STENCIL, 700-DC2654A REV03
TP12
C7 2.2uF 6.3V
TP6
R9
OPT
J1 USB3.1
GND
B12
RX1+
B11
RX1-
B10
VBUS
B9
SBU2
B8
D-
B7
D+
B6
CC2
B5
VBUS
B4
TX2-
B3
TX2+
B2
GND
B1
VBUS A9
RX2- A10
RX2+ A11
VBUS A4
SBU1 A8
D- A7
D+ A6
CC1 A5
GND A12
TX1- A3
TX1+ A2
GND A1
GND
X1
GND
X2
GND
X3
GND
X4
E3
TP16
TP3
R4 10k
R10
OPT
0612
TP14
TP10
M6
SSM6K513NU
TP27
TP20
TP4
SCL
CC2 D- D+
D+ D-
D+ D-
CC1
RESET
V3P3
SDA
RESET
CC1
P1.2 P1.0 P1.3 P1.1
P1.6
P1.5
P1.7
P1.4
SMBALERT SCL
P1.1 P1.0 P1.3 P1.2
P1.6 P1.4P1.5
P1.7
SDA
CC2
SMBALERT
VOUT

10
DEMO MANUAL DC2654A
Rev. 0
 ANALOG DEVICES, INC. 2019
10/19
www.analog.com
ESD Caution
ESD (electrostatic discharge) sensitive device. Charged devices and circuit boards can discharge without detection. Although this product features patented or proprietary protection
circuitry, damage may occur on devices subjected to high energy ESD. Therefore, proper ESD precautions should be taken to avoid performance degradation or loss of functionality.
Legal Terms and Conditions
By using the evaluation board discussed herein (together with any tools, components documentation or support materials, the “Evaluation Board”), you are agreeing to be bound by the terms and
conditions set forth below (“Agreement”) unless you have purchased the Evaluation Board, in which case the Analog Devices Standard Terms and Conditions of Sale shall govern. Do not use the Evaluation
Board until you have read and agreed to the Agreement. Your use of the Evaluation Board shall signify your acceptance of the Agreement. This Agreement is made by and between you (“Customer”)
and Analog Devices, Inc. (“ADI”), with its principal place of business at One Technology Way, Norwood, MA 02062, USA. Subject to the terms and conditions of the Agreement, ADI hereby grants to
Customer a free, limited, personal, temporary, non-exclusive, non-sublicensable, non-transferable license to use the Evaluation Board FOR EVALUATION PURPOSES ONLY. Customer understands and
agrees that the Evaluation Board is provided for the sole and exclusive purpose referenced above, and agrees not to use the Evaluation Board for any other purpose. Furthermore, the license granted
is expressly made subject to the following additional limitations:Customer shall not (i) rent, lease, display, sell, transfer, assign, sublicense, or distribute the Evaluation Board;and (ii) permit any Third
Party to access the Evaluation Board. As used herein, the term “Third Party”includes any entity other than ADI, Customer, their employees, affiliates and in-house consultants. The Evaluation Board is
NOT sold to Customer;all rights not expressly granted herein, including ownership of the Evaluation Board, are reserved by ADI. CONFIDENTIALITY. This Agreement and the Evaluation Board shall all
be considered the confidential and proprietary information of ADI. Customer may not disclose or transfer any portion of the Evaluation Board to any other party for any reason. Upon discontinuation of
use of the Evaluation Board or termination of this Agreement, Customer agrees to promptly return the Evaluation Board to ADI. ADDITIONAL RESTRICTIONS. Customer may not disassemble, decompile
or reverse engineer chips on the Evaluation Board. Customer shall inform ADI of any occurred damages or any modifications or alterations it makes to the Evaluation Board, including but not limited
to soldering or any other activity that affects the material content of the Evaluation Board. Modifications to the Evaluation Board must comply with applicable law, including but not limited to the RoHS
Directive. TERMINATION. ADI may terminate this Agreement at any time upon giving written notice to Customer. Customer agrees to return to ADI the Evaluation Board at that time. LIMITATION OF
LIABILITY. THE EVALUATION BOARD PROVIDED HEREUNDER IS PROVIDED “AS IS”AND ADI MAKES NO WARRANTIES OR REPRESENTATIONS OF ANY KIND WITH RESPECT TO IT. ADI SPECIFICALLY
DISCLAIMS ANY REPRESENTATIONS, ENDORSEMENTS, GUARANTEES, OR WARRANTIES, EXPRESS OR IMPLIED, RELATED TO THE EVALUATION BOARD INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTY OF MERCHANTABILITY, TITLE, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS. IN NO EVENT WILL ADI AND ITS
LICENSORS BE LIABLE FOR ANY INCIDENTAL, SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES RESULTING FROM CUSTOMER’S POSSESSION OR USE OF THE EVALUATION BOARD, INCLUDING
BUT NOT LIMITED TO LOST PROFITS, DELAY COSTS, LABOR COSTS OR LOSS OF GOODWILL. ADI’S TOTAL LIABILITY FROM ANY AND ALL CAUSES SHALL BE LIMITED TO THE AMOUNT OF ONE
HUNDRED US DOLLARS ($100.00). EXPORT. Customer agrees that it will not directly or indirectly export the Evaluation Board to another country, and that it will comply with all applicable United States
federal laws and regulations relating to exports. GOVERNING LAW. This Agreement shall be governed by and construed in accordance with the substantive laws of the Commonwealth of Massachusetts
(excluding conflict of law rules). Any legal action regarding this Agreement will be heard in the state or federal courts having jurisdiction in Suffolk County, Massachusetts, and Customer hereby submits
to the personal jurisdiction and venue of such courts. The United Nations Convention on Contracts for the International Sale of Goods shall not apply to this Agreement and is expressly disclaimed.