LINK-MI LM-YH02 User manual

HDMI Converter
MODEL:LM-YH02
Operating Instructions
Dear Customer
Thank you for purchasing this product. For optimum performance and safety, please
read these instructions carefully before connecting, operating or adjusting this product.
Please keep this manual for future reference.
FEATURES
•Transforms HD component video YPbPr and Audio R/L signal to HDMI output
•Hardware conversion, plug and play without any software drive
•Upscale composite up to 1080p
•Supports full range of Component Video Resolutions:480i, 480p, 576i, 576p, 720p,
1080i
•HDMI output resolution:720p/60Hz ,1080P/ 60Hz.
•Support PAL / NTSC standard
•Compliant HDCP .
•Uses 5V power

NOTICE
Our company reserve the right to make changes in the hardware, packaging and any
accompanying documentation without prior written notice.
TABLE OF CONTENTS
Specifications
Package Contents
Panel Descriptions
Connecting and Operating
Maintenance
Product service
Warranty
SPECIFICATIONS
Operating Temperature
Range
-5 to +35℃(+23 to +95℉)
Operating Humidity
Range
5 to 90%RH (No Condensation)
HDMI Output
HDMI 720p@50/60Hz or
1080P@50/60Hz
Audio Inputs
L/R channels
Video Input formats
PAL,NTSC
HDCP
Compliant HDCP .
Power consumption
1watts(Maximum)
Dimension (L×W ×H)
95*87*29mm
Net Weight
190g
Note: Specifications are subject to change without notice. Mass and dimensions are
approximate.
PACKING CONTENTS
1) Main Unit. YPbPr-HDMI converter

2) DC5V 1A Power Supply.
3) Operating Instructions
PANEL DESCRIPTIONS
Input Panel Output Panel
1) Video input: YPbPr Video input
2) Audio input: Audio L/R input
3) Power input
4) HDMI output port
5) Indicator of power Input
6) 720p/1080p:Select 720p or 1080p output
Connecting and Operating
1. Ensure the Converter is disconnected from power.
2. Connect source to the CVBS input and sink to HDMI output .
3. Connect 5VDC power to the converter. Attention: Insert/Extract

Typical Application
MAINTENANCE
Clean this unit with a soft, dry cloth. Never use alcohol, paint thinner of benzine to
clean this unit.
PRODUCT SERVICE
1) Damage requiring service: The unit should be serviced by qualified service
personnel if: (a)The DC power supply cord or AC adaptor has been damaged;
(b)Objects or liquids have gotten into the unit; (c)The unit has been exposed to rain;
(d)The unit does not operate normally or exhibits a marked change in performance;
(e)The unit has been dropped or the cabinet damaged.
2) Servicing Personnel: Do not attempt to service the unit beyond that described in
these operating instructions. Refer all other servicing to authorized servicing
personnel.
3) Replacement parts: When parts need replacing ensure the servicer uses parts
specified by the manufacturer or parts that have the same characteristics as the
original parts. Unauthorized substitutes may result in fire, electric shock, or other
hazards.
4) Safety check: After repairs or service, ask the servicer to perform safety checks to
confirm that the unit is in proper working condition.