Link FC30 Datasheet

223 15th St. N.E.
Sioux Center, IA USA
51250-2120
www.linkmortuaryequipment.com
QUESTIONS?
CALL CUSTOMER
SERVICE
1-800-248-3057
ASSEMBLY
INSTRUCTIONS AND
PARTS LIST
FC30 FLOWER CART
(7801A002)
78014110
AUG 4, 2023
Estimated weight : 44 lbs.
Link Mortuary Equipment, a division of Link Mfg., Ltd.
www.linkmortuaryequipment.com

223 15TH ST. NE, SIOUX CENTER, IA 51250
1-800-248-3057
www.linkmortuaryequipment.com
IMPORTANT: IT IS IMPORTANT THAT THE ENTIRE INSTALLATION INSTRUCTIONS BE READ THOROUGHLY BEFORE PRO-
CEEDING WITH THE INSTALLATION.
1. INTRODUCTION
Thank you for choosing a Link Mortuary Equipment FC30 Flower Cart. We want to help you get the best results from this cart and to op-
erate it safely. This instruction contains information to assist in the installation of the Link Mortuary Equipment FC30. This instruction is
intended solely for use with this product.
All information in this instruction is based on the latest information available at the time of printing. Link Manufacturing reserves the right
to change its products or manuals at any time without notice.
Damaged components should be returned to Link with a pre-arranged Returned Materials Authorization (RMA) number through the Cus-
tomer Service Department. The damaged component may then be replaced if in compliance with warranty conditions.
Assembly:
A. The FC30 is shipped disassembled for shipping purposes. Assemble the main flower cart frames (Items #9) and the H-shaped
crossmember (Item #3) by depressing the snap buttons (Item#1) and sliding the tubes together until the buttons snap into place.
B. Assemble the handles (Items #10 and 11) to the cart as shown using the provided fasteners (Items #7 and 12). Get all the fasteners
started before tightening any of them. Once they are started, tighten using Phillips screwdrivers.
C. Insert the casters (Items #4 and 5) as shown. Install the dividers in the trays as desired, and the FC30 is ready to use!
D.Call Link Mfg. at 1-800-248-3057 with any questions or comments.
LINK® MODEL FC30
(7801A002)