Link FC50 Datasheet

223 15th St. N.E.
Sioux Center, IA USA
51250-2120
www.linkmortuaryequipment.com
QUESTIONS?
CALL CUSTOMER
SERVICE
1-800-248-3057
ASSEMBLY
INSTRUCTIONS AND
PARTS LIST
FC50 FLOWER CART
(78014B00)
78012111
AUG 4, 2023
Estimated weight : 81 lbs.
Link Mortuary Equipment, a division of Link Mfg., Ltd.
www.linkmortuaryequipment.com

223 15TH ST. NE, SIOUX CENTER, IA 51250
1-800-248-3057
www.linkmortuaryequipment.com
LINK® MODEL FC40
(78013A00)
PARTS LIST
IMPORTANT: IT IS IMPORTANT THAT THE ENTIRE INSTALLATION INSTRUCTIONS BE READ THOROUGHLY BEFORE PRO-
CEEDING WITH THE INSTALLATION.
1. INTRODUCTION
Thank you for choosing a Link Mortuary Equipment FC50 Flower Cart. We want to help you get the best results from this cart and to op-
erate it safely. This instruction contains information to assist in the installation of the Link Mortuary Equipment FC50. This instruction is
intended solely for use with this product.
All information in this instruction is based on the latest information available at the time of printing. Link Manufacturing reserves the right
to change its products or manuals at any time without notice.
Damaged components should be returned to Link with a pre-arranged Returned Materials Authorization (RMA) number through the Cus-
tomer Service Department. The damaged component may then be replaced if in compliance with warranty conditions.
Assembly:
A. A. The FC50 is shipped disassembled for shipping purposes. Assemble the two halves of the Lower frame
B. (Item #7) using frame Crossmember (Item #9).
C. B. Repeat for Upper frame (Item #8)
D. C. Assemble the Lower and Upper frames to each other.
E. D. Insert the Casters (Items #1) as shown. Install the dividers in the trays as desired, and the FC50 is ready
F. to use!
G. E. Call Link Mfg. at 1-800-248-3057 with any questions or comments.