2
IMPORTANT: IT IS IMPORTANT THAT THE ENTIRE INSTALLATION INSTRUCTIONS BE READ THOROUGHLY BE-
FORE PROCEEDING WITH THE INSTALLATION.
1. INTRODUCTION
Thank you for choosing a Link Mortuary Equipment FC40 Flower Cart. We want to help you get the best results from this
cart and to operate it safely. This instruction contains information to assist in the installation of the Link Mortuary Equipment
FC40. This instruction is intended solely for use with this product.
All information in this instruction is based on the latest information available at the time of printing. Link Manufacturing re-
serves the right to change its products or manuals at any time without notice.
Damaged components should be returned to Link with a pre-arranged Returned Materials Authorization (RMA) number
through the Customer Service Department. The damaged component may then be replaced if in compliance with warranty
conditions.
Assembly:
A. The FC40 is shipped disassembled for shipping purposes. Assemble the main flower cart lower frame (Items #7) and
the upper frame (Item #8) by depressing the snap buttons (Item#5) and sliding the tubes together until the buttons snap
into place.
B. Insert the casters (Items #1) as shown. Install the dividers in the trays as desired, and the FC40 is ready to use!
C. Call Link Mfg. at 1-800-248-3057 with any questions or comments.
