Linksys OGV200 - Network Optimizer For Gaming Original operating instructions

Network Optimizer
for Gaming and VoIP Quick Installation
Model OGV200
Package Contents
• Network Optimizer for Gaming and VoIP
• Power Adapter
• Ethernet Network Cable
•QuickInstall
• User Guide on CD-ROM
• Registration Card
Q
u
i
c
k
I
ns
t
a
ll
a
ti
on
G
u
id
e

Before you begin, make sure you have an
active Internet Connection, then follow the
steps below to install the Network
Optimizer.
ARemove the Ethernet network
cable from your broadband modem
and connect it to the Network
Optimizer’s ROUTER port.
BConnect the included Ethernet
network cable to your broadband
modem, then connect the other end
to the Network Optimizer’s MODEM
port.
CConnect the power adapter to the
Network Optimizer’s power port, then
connect the other end to a standard
electrical outlet.
When the MODEM and ROUTER lights
begin to flash, about one minute, the
Network Optimizer is ready for use.
Congratulations, installation is complete.
AROUTER Port
BMODEM Port
CPower Port
1Install the Network Optimizer
for Gaming and VoIP
For additional information or troubleshooting
help, refer to the User Guide on the Setup
Wizard CD-ROM. You can also e-mail for
further support.
24 Hour Technical Support
800-326-7114
(toll-free from US or Canada)
E-mail Support
[e-mail]
Website
http://www.linksys.com or
http://support.linksys.com
RMA (Return Merchandise Authorization)
http://www.linksys.com/support
FTP Site
ftp://ftp.linksys.com
Sales Information
800-546-5797 (800-LINKSYS)
Linksys is a registered trademark or trademark of
Cisco Systems, Inc. and/or its affiliates in the U.S. and
certain other countries. Copyright © 2006 Cisco
Systems, Inc. All rights reserved.
OGV200-QI-60525NC CB