Linksys SPA2102-AN - Single Port Router User manual

QUICK INSTALL GUIDE
Fax Extension for the Linksys SPA 2102 ATA
Quick Activation and Installation Guide
Welcome to Fax Extension Service with 8x8 Virtual Oce!
Getting your Fax Extension Service up and running on your Linksys SPA 2102 Analog
Terminal Adaptor takes just a few minutes.
Activating Your Linksys ATA
You will need your activation code to activate your Linksys ATA. The activation code was
sent via email. You can also retrieve it in the 8x8 Account Manager by following these
instructions:
1. Go to www.8x8.com, click Sign-In and select Account Manager.
2. Enter your administrator username and password.
3. Click Phone System from the top naviation bar and select Extensions.
4. Click Activate Device next to the extension you wish to activate.
5. A pop-up screen displays the activation code for the extension.
6. Connect your ATA to a power source and a router or modem with an Internet connection.
7. Make sure a phone is connected to the Phone 1 plug on the Linksys ATA that you want
to activate.
–If your fax machine has a telephone, lift the handset and follow the voice instructions
to enter the activation code and activate your port
–If your fax machine does not have a built-in telephone, temporarily connect any analog
telephone to activate this port, then plug your fax machine back in for fax service.
8. Follow the instructions on page 2 to install your ATA.
Assistance
If you would prefer to set
up your service over the
phone at no extra charge:
Call 1.866.208.9369 to
schedule an appointment.

QUICK INSTALL GUIDE
Fax Extension for the Linksys SPA 2102 ATA
NASDAQ: EGHT
www.8x8.com
© 2011. The 8x8, Inc. logo is a registered trademark of 8x8, Inc. 8x8, Inc. is a publicly traded company. PM363/111
Installing your Linksys SPA 2102 ATA
• Connect your fax machine to the Phone 1 plug port on the back of your Linksys ATA SPA 2102.
• Disconnect the power adapter on your Linksys ATA and reconnect it after a few seconds.
• You are now ready to place fax calls.
PHONE 1 PHONE 2 ETHERNET INTERNET
DC 5V
Power
Fax Machine Computer or
Laptop
Internet Connection
(Router or
Broadband Modem)
Power AdapterAnalog Phone
or Fax Machine
NOTE: If you do not have a router, you can connect your Linksys ATA directly into a broadband modem. Please refer to the
Linksys ATA Quick Start Guide on how to congure this.