Linksys SD2008 Operation manual

PRODUCT DATA
BUSINESS SERIES
8-Port
10/100/1000 Gigabit Switch
Model: SD2008
Wire-speed switching and Linksys
reliability in a 8-port Gigabit switch
The 8-Port 10/100/1000 Gigabit Switch provides non-blocking, wire speed switching
for your 10, 100, and 1000 megabit network clients. Drop this switch in place of
your current workgroup hub or switch, and you can upgrade your high-requirement
workstations to full Gigabit speeds as necessary, while continuing to service other
clients at their current speeds. Or build your network from the ground up, with
appropriate link speeds for each user’s requirements. Either way, it’s perfect for
graphics, multimedia, and other applications that have to move large files across the
network quickly.
With the 8-Port 10/100/1000 Gigabit Switch, you can connect your existing 10/100
Ethernet network to a Gigabit server backbone without any additional equipment.
All ports have automatic MDI/MDI-X crossover detection, so you don’t have to worry
about the cable type. Each port independently and automatically negotiates for best
speed and whether to run in half- or full-duplex mode. Address learning and aging is
supported, as well as 802.3x flow control with head-of-line blocking prevention to keep
your high-speed clients from bogging down in lower-speed traffic. Fast store-and-forward
switching prevents damaged packets from being passed on into the network.
World famous Linksys reliability and the limited lifetime warranty give you peace of mind
and the new ultra-compact case design is sure to fit into your workgroup environment. Let
the Linksys 8-Port 10/100/1000 Gigabit Switch kick your network into high gear.
Eight 10/100/1000Mbps,
half/full duplex, switched
ports
Forwards and filters
packets at non-blocking,
full wire speed
All ports have auto speed
negotiation and auto
MDI/MDI-X crossover
detection
Linksys reliability and
limited lifetime warranty
SD2008

PRODUCT DATA
BUSINESS SERIES
Linksys
A Division of Cisco Systems, Inc.
121 Theory
Irvine, CA 92617 USA
E-mail: [email protected]
[email protected]
Web: http://www.linksys.com
Linksys products are available in more
than 50 countries, supported by
12 Linksys Regional Offices throughout
the world. For a complete list of local
Linksys Sales and Technical Support
contacts, visit our Worldwide Web Site
at www.linksys.com.
Features
8 RJ-45 10/100/1000Mbps
auto-sensing half/full duplex
switched ports
All ports support auto
MDI/MDI-X cable detection
Fully compliant with IEEE
802.3, 802.3u, 802.3x,
802.3ab
Non head-of-line blocking
architecture
Full-duplex IEEE 802.3x
flow control and half-
duplex backpressure with
intelligent port-based
congestion detection and
broadcast rate control
•
•
•
•
•
Check the product package and contents for specific features supported. Specifications are subject to change without notice. Linksys is a registered trademark or
trademark of Cisco Systems, Inc. and/or its affiliates in the U.S. and certain other countries. Copyright © 2006 Cisco Systems, Inc. All rights reserved. Other brands
and product names are trademarks or registered trademarks of their respective holders.
Model: SD2008
8-Port
10/100/1000 Gigabit Switch
Specifications
Model SD2008
Standards IEEE 802.3, 802.3u, 802.3x, 802.3ab
Ports 8 RJ-45 10/100/1000 Mbps ports
Cabling Type Cat5e
LEDs System, 1 through 8
Security Feature Security Slot
Environmental
Dimensions 5.12" x 1.18" x 5.00"
W x H x D (130 x 30 x 127 mm)
Unit Weight 0.94 lbs (0.425 kg)
Power DC12V/1A
Certification FCC Class B, CE
Operating Temperature 32 to 104ºF (0 to 40ºC)
Storage Temperature -40 to 158ºF (-40 to 70ºC)
Operating Humidity 20 to 95%, noncondensing
Storage Humidity 5 to 90%, noncondensing
Package Contents
8-Port 10/100/1000 Gigabit Switch
AC Power Adapter
User Guide
•
•
•
692021NC JL