Linksys SFE2000 User manual

Linksys Business Series 24-port Fast Ethernet Switch
QUICK INSTALLATION GUIDE
Model SFE2000

Linksys Business Series Fast Ethernet Switch

Linksys Business Series SFE2000 Fast Ethernet Switch
180772
1
Linksys Business Series SFE2000 Fast Ethernet Switch

Linksys Business Series SFE2000 Fast Ethernet Switch
2Install: Desktop

Linksys Business Series SFE2000 Fast Ethernet Switch
140988
TM
3
Install: Wall

Linksys Business Series SFE2000 Fast Ethernet Switch
180911
TM
4Install: Wall

Linksys Business Series SFE2000 Fast Ethernet Switch
5
Install: Rack

Linksys Business Series SFE2000 Fast Ethernet Switch
6Connect Data Devices

Linksys Business Series SFE2000 Fast Ethernet Switch
7
Connect Linksys One Devices

Linksys Business Series SFE2000 Fast Ethernet Switch
8Connect to Power

Linksys Business Series SFE2000 Fast Ethernet Switch
180777
9
Install: Stack
Before setting up stacked switches in your network, see the technical bulletin, “Linksys Stackable Switches: How to Build
Stacks and Understand Their Operation,” available at www.linksys.com.

Linksys Business Series SFE2000 Fast Ethernet Switch
180778
10
Install: Stack
Warning Use only ports G1/G2 for stacking. If you manually assign a
Unit ID to one unit, you should manually assign Unit IDs to
all
units. Using both system-assigned and manually-assigned IDs in
your network can impact system performance.

Linksys Business Series SFE2000 Fast Ethernet Switch
11
Connect Data Devices

Linksys Business Series SFE2000 Fast Ethernet Switch
180780
12
Connect to Power

Linksys Business Series SFE2000 Fast Ethernet Switch
The Linksys One SFE2000 Fast Ethernet switch meets the following regulatory compliance and safety standards:
Specification Description
Regulatory Compliance Products with the CE Marking indicate compliance with the 89/336/EEC and 73/23/EEC directives,
which include the safety and EMC standards listed below.
Safety UL 60950-1
IEC60950-1 CB / TUV/Rh
CSA-C22.2 No. 60950
EN 60950
AS/NZS 60950-1
C-Tick
EMC FCC Part 15 (CFR 47) Class A
ICES-003 Class A
EN 55022 Class A
CISPR22 Class A
EN 55024, EN 50082-1, EN 61000-3-2, EN 61000-3-3, EN 61000-6-1
Regulatory Compliance and Safety Information

Linksys Business Series SFE2000 Fast Ethernet Switch
Federal Communication Commission Interference Statement
This Equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the
interference at his own expense.
Warning You are cautioned that changes or modifications not expressly approved by the party responsible for compliance
could void your authority to operate the equipment.
Industry Canada Statement
The Class [A] digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulation. Cet appareil numerique
de la class [A] respecte toutes les exigences du Reglement sur le materiel brouilleur du Canada.
EC Declaration of Conformity (Europe)
In compliance with the EMC Directive 89/336/EEC, Low Voltage Directive 73/23/EEC, and Amendment Directive 93/68/EEC, this product
meets the requirements of the following standards:
• EN55022 Emission
• EN55024 Immunity

Linksys Business Series SFE2000 Fast Ethernet Switch
Dimensions 17.32" x 1.73" x 14.70" (440 mm x 44 mm x 375 mm)
Unit Weight 9.68 lbs. or 154.85 oz (4.39 kg)
Power 48 VDC, 100-240V 1.5A
Certification UL (UL 60950), CSA (CSA 22.2), CE mark, FCC Part 15 (CFR 47), Class A
EN60950 (2001)
Security ACL, 802.1x
Operating Temp 0ºC to 40ºC (32ºF to 104ºF)
Storage Temp -20ºC to 70ºC (-4ºF to 158ºF)
Operating Humidity 10% to 90% relative humidity, Non-Condensing
Storage Humidity 10% to 95% relative humidity, Non-Condensing
Environmental Specifications

Linksys Business Series SFE2000 Fast Ethernet Switch
The following statements are warnings or safety guidelines. A warning means danger. You are in a situation that could cause
bodily injury. Before working on equipment, be aware of the hazards involved with electrical circuitry and standard safety
practices to prevent accidents.
Warning
IMPORTANT SAFETY INSTRUCTIONS
This warning symbol means danger. You are in a situation that could cause bodily injury.
Before you work on any equipment, be aware of the hazards involved with electrical
circuitry and be familiar with standard practices for preventing accidents. Use the statement
number provided at the end of each warning to locate its translation in the translated safety
warnings that accompanied this device.
SAVE THESE INSTRUCTIONS
Warning
Work During Lightning Activity
Do not work on the system or connect or disconnect cables during periods of lightning
activity.
Safety Information

Linksys Business Series SFE2000 Fast Ethernet Switch
Warning
Installation Instructions
Read the installation instructions before connecting the system to the power source.
Warning
SELV Circuit
To avoid electric shock, do not connect safety extra-low voltage (SELV) circuits to
telephone-network voltage (TNV) circuits. LAN ports contain SELV circuits, and WAN
ports contain TNV circuits. Some LAN and WAN ports both use RJ-45 connectors. Use
caution when connecting cables.
Warning
Equipment Installation
Only trained and qualified personnel should be allowed to install, replace, or service
this equipment.

Linksys Business Series SFE2000 Fast Ethernet Switch
Warning
Comply with Local National Electrical Codes
Installation of the equipment must comply with local and national electrical codes.
Warning
Product Disposal
Ultimate disposal of this product should be handled according to all national laws and
regulations.