Safety
Proper use
The blanket is exclusively designed for warming beds. It is only intended for private
use and not suitable for commercial purposes.
Only use the blanket as described in this user manual. Any other use is considered
improper and may result in damage to property or persons.
The manufacturer or vendor cannot be held liable for damages or injury incurred
through improper or incorrect use.
Safety instructions
IMPORTANT INSTRUCTION.
RETAIN FOR FUTURE USE.
Risk of electric shock!
A faulty electrical installation, excessive line voltage, or incorrect operation may result in
an electric shock.
-The blanket is not intended for use in hospitals.
-Only use the blanket indoors.
-Do not use if the blanket is wet.
-Do not use the blanket wet or in rooms with high humidity such as bathrooms etc.
-Only connect the blanket if the line voltage of the socket corresponds to the data on
the rating plate.
-Only connect the blanket to an easily accessible socket so that you can quickly
disconnect it from the power supply in the event of a problem.
-If the fuse link or thermal link has ruptured, the blanket shall be returned to the
manufacturer for repairing.
-If the supply cord is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualified person in order to avoid a hazard.
-Avoid creasing the blanket.
-Examine the blanket frequently for signs of wear or damage. If there are such signs or if
the blanket has been misused, return it to the supplier prior to any further use.
-Do not insert needles in the blanket.
-Do not use the blanket if folded or rucked.
-Do not use a damaged blanket and disconnect it from the power supply immediately.
-Do not repair the blanket yourself, contact an authorised specialist. In order to avoid
hazards, only have defective power cables replaced with comparable cables by the
manufacturer, the customer service or similarly qualified people.
-Only use the blanket in conjuction with the supplied control unit.
-Do not open the housing; instead, have a qualified professional perform repairs.
Contact a qualified workshop for this. Liability and warranty claims are waived in the
event of repairs performed by the user, improper connection or incorrect operation.