LinsnField PFS-200 User manual

Impulse Bag Sealer
PFS-200/300/400
OPERATING INSTRUCTIONS

1
www.linsnfield.com

DEAR CUSTOMMER!
Thank you for purchasing our impulse bag sealer. All of our
products are designed and manufactured to meet the highest quality requirements.
For effective and safe operation, please read this manual book carefully and keep
it for future reference.
When using the device, always follow the safety instructions contained in these operating
instructions.
It is strictly forbidden to make any changes to the design of the device. In case of non-
observance of the operating rules of the device or making any changes to its design, the
equipment is not subject to warranty repair.
APPOINTMENT
This impulse bag sealer is designed for all heat sealabel materials.
SPECIFICATIONS
Supply voltage/V 110
Power consumption/W 800/900/1000
Size/in 8/12/16
Sealing width/mm 2 for 8inch/5 for 12inch
Weight/lb 11/11.5/12
WARRANTY
1. If you are not completely satisfied with our product, send us a mail, we will offer
you refund within 1year, or replacement within 3years.
2. If you have any suggestion with our product improvement, let us knowand wewill
offer free samples to thank you.
If the appliance should become defective within the warranty period, please contact
LinsnField Customer Service Team by
[e-mail] /www.linsnfield.com
2

PREVENTION OF ACCIDENTS
•When use the appliance, do keep the heat seal strip clean for next time use!
•Never wipe the heat seal strip with a wet cloth.
•Replacement kit is a crucial barrier between the heating press part and the bag. Often
try to change the old kit could have a better bag sealing for daily use.
•Kit should be replaced when the PTFE(cloth)appears warn, discolored or sealing isn't
perfect.
•Keep the sealer's surface clean to avoid the oxidation of the residue which will reduce
the life of the heat sealing strip.
•For proper function of the appliance, regularly check the rubber of the press part for a
better sealing after a continuce use.
•Never immerse the body of the appliance in water.
•Never operate this appliance in explosive atmospheres.
•Only use the accessories that came with the package.
•Do not allow children to use the impulse sealer as a toy, special care should be taken
when children or persons with disabilities are near the appliance.
•During operation, keep the device at a safe distance from your face and eyes.
•Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the
appliance. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or
entangled cords increase the risk of electric shock.
•In case of electrical or mechanical malfunction, immediately switch off the appliance
and unplug it.
•Before use, check the device to see if it is any damaged or there is any defective
accessories.
•The device is intended for power supply of 110V. Do not connect the device to a
different voltage.
3

4
HOW TO USE
1. Put the plug into the power;
2. According to the thickness of bags, adjust the sealing timer to 1-8; and level 3is
enough for most bags;
3. Impulse the press part for sealing;
4. When the signal light is off automatically, keeping the handle pressed down for a few
seconds would get optimal results.
MOST IMPORTANT
•The impulse sealer with the patent of overheating protect function, is a perfect sealer
to seal Kel-F, Mylar, Polyflex, P.V.A., Polyethylene, Polyurethane, Polyvinylchloride,
Polypropylene, Pliofilm, Tivac, Saran and all other heat sealable materials.
•Level 3is enough for most applications.
•The red light is not predictable when plug into the power. It is only predictable when
keep the handle pressed down on bottom. This is a protection for sealer or it will burn
out after several uses.
•When seal is done, the red light will go off. Don't release the handle at once and keep
the handle pressed down for a few seconds to get optimal results.
•Replacements should be replaced when PTFE(cloth)appears warn, discolored or
sealing isn't perfect.
•When changing the replacemens, if use a vise to less-angle the hook whose one side
of heat seal strip, and reattach the heat strip, that would be better for next sealing.
•The device has the patent of overheating protect function:if the sealer does not work
after a period of time, it means the transformer has been in the overheating protect,
please reuse the sealer after 10-20 mins rest.
•Unauthorized reselling of LinsnField products is strictly prohibited.

CUSTOMER SERVICE
If the appliance should become defective within the warranty period, please contact
LinsnField Customer Service team by [e-mail]
This warranty does not cover normal wear of parts or damage resulting from negligent
use or misuse of the appliance, use contrary to the operating instructions, failure to
provide reasonable and necessary maintenance, or disassembly, repair or alteration
by anyone unless directed by an LinsnField Representative. This warranty does not
cover units that are used outside of US and Canada. Further, the warranty does not
cover damage resulting from Acts of God, such as fire, flood, hurricanes and
tornadoes. LinsnField is responsible for shipping cost for warranty service.
Manufacturers’warranties may not apply in all cases, depending on factors such as use
of the product, where the product was purchased, or who you purchased the product
from. Please review the warranty carefully, and contact the manufacturer if you have
any questions.
ABOUT LINSNFIELD
Through years of collaborating with the world’s top brands, LinsnField has always stood
by its commitment to deliver the best quality products and the best value for its
customers.
At LinsnField, we believe in "Honesty is the best policy."
Integrity is our way of life. As a family-run business, we seek to build long-term
partnerships with our clients. We are honest and hard-working, striving to earn your
trust and your business.
We work hard to provide our customers with the highest quality and most cost effective
products.Our factory's products are carefully inspected by our experienced staff at each
stage of production. Products go through a rigorous final inspection before leaving our
factory to ensure that each client's specifications are met.
We take pride not only in the merchandise we produce, but moreimportantly, in earning
your confidence and trust.
5

6
Anthythingyou can do,you can do better with it
LinsnField
WWW.LINSNFIELD.COM
SERVICE EMAIL:[email protected]