Linus Delano Basket Operating and maintenance instructions
DELANO BASKET
Installation Manual
REQUIRED TOOLS:
• 3mmHexWrench
• 4mmHexWrench
• 5mmHexWrench
• 8mmBoxWrench
• 10mmBoxWrench
[SEE FIGURE 1.]
INCLUDED HARDWARE:
• BasketBraces(2)
[SEE FIGURE 2.]
• MountingBracket
• M4x12mmbolts(4)
• M5x20mmbolts(2)
• M5x15mmbolts(4)
• M4Locknuts(2)
• M5Locknuts(4)
• BracketSpacers(2)
• M4Washers(6)
• M5Washers(4)
[SEE FIGURE 3.]
FIGURE 1.
FIGURE 2.
FIGURE 3.
M5X15mmBolts(4)
M4X12mmBolts(2)
M4X12mmBolts(2)
M5X20mmBolts(2)
STEP 1
Removeslatbeneaththecupholderusingthe
3mmHexWrenchand8mmBoxWrench.
Setslataside.
[SEE FIGURE 4.]
STEP 2
AttachBasketBraceswithM5x15mmbolts,
M5washer,andM5Locknutusingthe5mm
HexWrenchand10mmBoxWrench.Donot
tightendowncompletely.
*Notethebracesarenotsymmetrical.Theright
(bicycledriveside)braceisstamped‘R’facing
outwhenmountedandleftisstamped‘L’
facingoutwhenmounted.
[SEE FIGURE 5.]
Thebracesaremountedontheinsideofthe
basketmountingrail.
[SEE FIGURE 6.]
Bothbracesaremountedlooselyandcanslide
forwardandbackonthebasket.
[SEE FIGURE 7.]
FIGURE 4.
FIGURE 5.
FIGURE 6.
FIGURE 7.
STEP 3
AttachMountingBracketwithM4x12mm
bolts,M4washers,andM4Locknuts.The
bracketanglefaceddown.Donottighten
downcompletely.
[SEE FIGURE 8.]
Ifnecessary,useincludedspacersandM5x
20mmtoensurebasketsitslevelonsmaller
frontforks.Donottightendowncompletely.
[SEE FIGURE 9.]
STEP 4
SlideMountingBracketontothreadedbrake
bolt,orseparatebolt,orseparateboltapprox.
45mminlength(notincluded),ifthereisno
frontbrake.
[SEE FIGURE 10.]
Tightendownbrakewith5mmHexWrench.
Tightenseparateboltwithlocknutifthereisno
frontbrake.
[SEE FIGURE 11.]
FIGURE 8.
FIGURE 10.
FIGURE 11.
FIGURE 9.
STEP 5
MountlowerbraceangeusingM4x12mm
boltsandM4washersintotheforkdropout
braze-ons.Tightenboltswith4mmHexWrench.
[SEE FIGURE 11.]
STEP 6
Slidebasketalongmountingbrackettoward,
orawayfromthefrontofthebike.Tighten
downbracketcompletelyoncebasketislevel
using4mmHexWrenchand8mmBoxWrench.
[SEE FIGURE 8.]
STEP 7
Slidebasketalongmountedbracestodesired
distancefromfrontofthebike.Tightendown
M5x15mmboltsandM5Locknutscompletely
usingM5HexWrenchand10mmBoxWrench.
[SEE FIGURE 6.]
STEP 8
Replaceslatbeneaththecupholderusing
the3mmHexWrenchand8mmBoxWrench.
Tightendownallslatscompletely.
[SEE FIGURE 12.]
STEP 9
Double-checkallnutsandboltstoensurethey
aretight.
DelanoBasketisinstalled.
[SEE FIGURE 13.]
FIGURE 11.
FIGURE 12.
FIGURE 13.
Table of contents
Other Linus Bicycle Accessories manuals
