Liquid LEDs Smart Colour String Lights User manual

Smart Colour String Lights
User Manual
Download Free App:
Tuya
[email protected]Email:

SAFETY INFORMATION
• Sockets used to power smart string lights should comply with all national
and local electrical codes. If you are unsure of compliance requirements,
please consult your local electrician.
• Do not operate the bulbs without tightening string lights, making sure to
unplug the smart string lights during installation to avoid damage to the
power cord and lamp assembly during installation.
• Do not use in water. Do not use extension cords or places where water may
accumulate near water. Take care to keep the bulb at least 8meters from the
surface of the water. Keep the plug and socket dry.
• Do not install the smart light string in a position where you can step on it.
Not be allowed for children to play smart string lights should be installed
out of reach of children.
• SAA recommends testing power plug and outlets monthly to ensure proper
operation.
• Regularly check the smart string lights for physical damage or other damage
caused by outdoor exposure to components, and replace any damaged
smart string lights components in time.
Smart String Lights are designed to be mounted with their individual keyhole
mounting feature.
Do not mount Smart String Lights by using the main electrical cord or the
individual drop cords.
Smart String Lights are designed to have limited linkability by using their
electrical plugs and receptacles.
Do not mount Smart String Lights in any position where the bulb is facing up.
Do not allow the LED lamp assemblies to be in contact with combustilble
materials.
IMPORTANT: READ ALL THE SAFETY INFORMATION AND INSTALLATION
INSTRUCTIONS BEFORE INSTALLING OR SERVICING THIS PRODUCT.
KEEP THIS MANUAL FOR REFERENCE.
Warning:
RISK OF ELECTRIC SHOCK
RISK OF FIRES
2

LED lamp assemblies should hang freely and not be susceptible to repetitive
damage caused by environmental conditions such as wind, rain, and ice.
Not intended for installation in ceilings, soffits, cabinets, attics, or other
enclosed spaces.
Operation is subject to the two following conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that
may cause undesired operation.
Note: This equipment has been tested and found to comply with SAA. These
limits are designed to provide reasonable
protection against harmful interference in a residential installation.
The LiquidLEDs Smart String Lights are perfect for any occasion! Control
your String lights using Alexa, Google Voice Assistant or control them with any
WiFi-enabled smartphone/tablet in the tuya smart app (available for Android
or iOS). The Tuya smart app allows you to control the Smart String Lights
throughout your entire house, indoors and out, at the touch of a button. Turn
your lights on and off from anywhere!
CAUTION: Suitable for outdoor /indoor use only.
DO NOT IMMERSE IN WATER DO NOT EXCEED RATED CAPACITY
SAA Notice:
3
Thank you for purchasing the LiquidLEDs Smart String
Lights
Inside the package you'll find:
15 Meter Smart String Lights

1. Carefully unpack Smart String Lights from the box.
2. Before installing, plug the Smart String Lights into an
outlet to ensure all lights work properly.
Overall Length: 15 meter
Number of Sockets: 15
Bulbs Included: 15
Input Volts: 110-250 V AC
Output Volts: 12 V DC
Rated Wattage: 7.5 W
Max Wattage: 24 W
Bulb Wattage(each): 0.5 W
Cord Color: Black
Bulb Color: RGBCW
4
Step 1: Initial Setup
Specifications:
IMPORTANT:Unplug the Smart String Lights prior to mouting

5
Installing By Guide Wire
Step 2: Installing
1. Attach to structure to the
sixth or seventh holder
in middle of each
String Light. 2. Attach to structure on first
and last holder.
3. Installing by Structure Connect securely to structure at the
beginning,middle and end of each string light.
Attach ring at the back of every bulb holder to the guide wire using
an S-hook or cable tie (not included)
Attach Using
hooks or cable ties
Guide Wire
Wire to
Structure
Wire to
Structure
NOTE: Attachment hardware, such as hooks or nylon cables
ties is not included.

6
Step 3: Plug - In
Plug LiquidLeds Smart String Lights into any standard outlet

7
Tuya
Tuya
Step 4: Download App
Download the Tuya App from the App Store or Google Play.

8
Step 5: Register
1. Enter your mobile phone number or email address.

9
2. Enter the verification code
and create a passwoord.
3. Log into the APP

10
Tuya Tuya
Tuya
“Tuya”
Step 6: Add Device
1. Enter your mobile phone number or email address.
Please select “Allow While Using APP”
positioning function when connecting
products with APP.
1. Select “Add Device” or
click"+"at the top right
corner of the homepage
2. Click “Add” from Discovering
devices

11
3. Hold the power button for about 5 seconds until the bulb on the string lights
flashes rapidly, and then press "Continue light blinks rapidly" on the APP page.
Conrm light blinks rapidly

12
Enter your 2.4GHz Wi-Fi
network and password.
The Tuya smart App
will connect your device.
Step 7: Plaese make sure you are in
close proximity of router.
OK

13
Congratulation!
Now you can use Tuya App
to control your string lights
Select Colour
Broad spectrum of colours to
create the perfect ambiance.
Confirm how many bulbs in
the string light
Brightness
Increase or decrease
bulb brightness.
Tunable Light
Adjustable temperature
range from warm to cool

14
Scenes
The Tuya APP has a scene selection function.
Press the scene button to enter the scene selection interface.
You can choose your favorite scenes as you like.
Select light scene
Select a scene Customise based
on your mood

15
Schedule
Steps to set the time
The Tuya App is free to add and set the working time of the LiquidLEDs Smart
Light String, which can be turned on and off freely according to the set time.
Hold “Schedule” for
2 seconds Start entering
the setup interface
Select the time to set,
Choose whether you want
to repeat the settings.

16
Schedule
Steps to set the time
Select the time to
repeat the setting
within a week
Define whether the set
time is the beginning or
the end of the work

Troubleshooting:
Cannot connect to your Wi-Fi network.
Make sure you entered the correct Wi-Fi password during the
Wi-Fi setup.Check whether there are problems with your internet
connection. If Wi-Fi signal is too weak, reset your Wi-Fi router
and try again.
Setup is not working properly.
1. Close all apps that are running in the background then
re-open the Tuya app.
2. Uninstall and reinstall the Tuya smart app then repeat the setup process.
Smart String Lights are not responding to Tuya App.
1. Check if Smart String Lights are turned off. If yes, turn them on and waituntil
Smart Bulb reconnects with the Wi-Fi network automatically.
2. Check if there are problems with your internet connection.
If necessary,reset your wireless router and try again.
How many colors can I pick from?
Smart String Lights Use RGB LEDs, allowing you to choose from millions of
colors per bulb. Using the Tuya smart App on your smart device, you can
choose the exact color(s) you want for your color sequence.
[email protected]
Email: