Listen Technologies LCS-121-01 User manual
Wi-Fi/RF COMBO COMPLIANCE SYSTEMS QUICK START GUIDE
LCS-120-01, LCS-120-01- D, LCS-121-01 AND LCS-121-01-D
Let’s get this audio started!AUDIO EVERYWHERE SETUP
Line Level Audio
Ethernet Switch
Router
Cloud Services
Internet
WAP (Wireless Access Point)
Wireless
router combines
many features
MX-5 AE Server
Audio Source
Smartphone
Connect Audio
Connect the audio source(s) to the
server via the RCA connectors on
the rear panel.
Note: The input jacks accept line-level mono
input. If stereo output is required, use two
audio inputs for L and R audio, then select
“stereo”, in the Cloud Server. (See Cloud
Service Setup on
www.listentech.com/support/manuals)
Network Connection & Power
Connect the AE Server to your
local area network (LAN) via the
ethernet port on the back of the
server then plug in the power
cable. The LAN should have at
least one wireless access point
(WAP) and a router, wireless
router, or a DHCP server. The
server and smartphones need to
be on the same public network.
Download App
Download the Audio Everywhere
app from the App Store or Google
Play. Join the Wi-Fi network associ-
ated with the Venue Server (i.e., on
the same LAN). Launch the app,
select channel to stream, enjoy!
TROUBLESHOOTING TIP
Experiencing lack of signal? Check IP addresses on the Venue Server
and smartphones to ensure they are on the same public network.
CLOUD SERVER SETUP (optional)
The cloud server offers in-app marketing features including banner
ads and promotional videos, web-based remote setup and
maintenance, and advanced customization. Create an account with
including the following information:
Company Setup
Company Name
Phone
Venue Type
Address
AE Server Venue Serial Number
User Setup
Last Name
First Name
Phone
Email
*Serial number looks like: AEL6-2345-43RF-TEW9
You will receive an email with login
credentials to
service.audioeverywhere.com
1.
2.
3.
Power Input
LISTENRF SETUP Setting up Transmitter
Connect Antenna
If using the LT-803, remove the
rubber plug on the top of the unit
and connect the antenna.
If using the LT-800, connect the
antenna to the back of the unit.
Connect Power
Plug the power supply into the
power connector on the back
panel, then into an outlet. Turn on
by pressing the power button.
Connect Audio
There are two audio inputs; input
1 is a balanced connection using
either an XLR or 1/4” phono
connector. Input 2 has two
unbalanced mixing RCA
connectors.
Connect Dante Audio Adapter
with Audio (optional)
If you are using the Dante Audio
Adapter, connect the RJ45 network
cable into the Dante Adapter &
plug one of the XLR outputs to
input 1 on the LT-800/803 & the
other XLR output into the MX-5 AE
server.
Audio Source
RF Transmitter
Power Input
Antenna Output (LT-803)
Antenna Output (LT-800)
RJ45 Network Cable
Dante Audio Adapter
Network
Audio Source
MX-5 AE Server
RF Transmitter
Setting up Receivers
Micro-USB
Charging
Port
Power
Adjust Volume
Power
To turn on the iDSP receiver, hold the
button for one second.
Plug in Headset
Adjust Volume
To desired level.
The receiver is charged with a micro
USB charging cable provided with the
system. When connected to the
charger, a blinking light indicates it is
being charged and a solid light
indicates a full charge.
Power
Open the front access door, use
“battery” select switch to assign
battery type, install batteries. Rotate
the volume dial counterclockwise to
power on.
Plug in Headset
Adjust Volume
To desired level.
Front
access
door
Power & Volume Control
LR-4200 LR-200
For further customization, view the QSGs (quick start guides) and manuals found at www.listentech.com/support/manuals
1.
2.
3.
1.
2.
3.
1.
2.
3.
OR
LISTEN TECHNOLOGIES 14912 Heritage Crest Way, Bluffdale, Utah 84065-4818 USA
Phone: +1.801.233.8992 Toll-Free: 1.800.330.0891 www.listentech.com
Copyright © 1998 - 2018 Listen Technologies Corporation. All rights reserved. 09142018-V1
This manual suits for next models
3
Other Listen Technologies Accessories manuals
