Listen Technologies Docking Station 4 User manual

www.listentech.com
Docking Station using ListenTALK
Quick Start Guide
Setup and Charging
1. Place the docking station on a at surface or
counter where receivers are easily accessible.
Alternatively, the docking station can be mounted
to a wall or other surface using the wall mounting
slots (LA-480 and LA-482).
2. Connect the docking station to a power outlet using
the provided power supply.
3. Insert your ListenTALK transceivers and receivers
into the charging pockets of the docking station.
The receiver(s) top LED status will begin ashing to
indicate the battery is charging and turn solid when
fully charged.
Note: Do not close the docking station case when connected to
power! The case must remain open to ensure proper ventilation
while charging (LA-481).
Create a Group with Docking Station
Create a leader and optional sub-leader(s) by inserting
red leader clips onto transceivers. Place the leader
into the red leader pocket. Place other transceivers and
receivers into participant pockets.
Pairing Button – Create a ListenTALK group by
momentarily pressing the docking station pairing
button. The pairing indicator will ash during pairing,
then turn solid momentarily and nally extinguish when
the pairing process is completed successfully. Create
multiple, independent ListenTALK groups by repeating
this process with additional units.
Note: Each ListenTALK group is independent and communication
is secured by a unique pair key.
Introduction
Thank you for purchasing a docking station! Please reference this guide to use ListenTALK transceivers and
receivers with this product. For ListenWIFI products, please reference the Docking Station using ListenWIFI Quick
Start Guide.
The docking station allows for easy charging and management of ListenTALK transceivers
and receivers. This guide provides an overview of the docking station and does not include
all features or options. For complete details on care and use, please visit the
ListenTech.com website to download the ListenTALK user manual.
Visit the ListenTech.com website to order accessories.
www.listentalk.com/support
Docking
Station Case 16
LA-481
Docking
Station 16
LA-480
Docking
Station 4
LA-482

Windows® is a trademark of the Microsoft group of companies.
Copyright © 1998 - 2023 Listen Technologies Corporation. All rights reserved. 20230807.
New Pair Key – To create a new pair key, insert
leader into leader pocket and other transceivers into
participant pockets in the docking station. Press and
hold the pairing button for ve seconds. The pairing and
status indicators will ash momentarily, turn solid, and
then extinguish indicating success.
Leader Clip Storage
Leader clips are only required for leader and
sub-leader transceivers. Remove leader clips from
participant transceivers and place them in the docking
station leader clip storage slots for future use.
ListenTALK Status
Status Button – Press and hold the docking
station status button to illuminate the tranceiver
graphic displays for group identication and other
tranceiver information.
LA-382 Intelligent Cable Management Unit
A cable management unit is
available for conveniently storing
headsets, headphones, neck
loops, and other accessories
(available for LA-480 only).
User Check-Out
Docking Station Pockets – Place a credit-card sized
I.D. in the docking station pocket to identify the person
currently using that specic ListenTALK Transceiver.
ListenTALK Software Suite – Use check-out mode to
identify the person currently using a specic ListenTALK
Transceiver.
Programming
Connect a Windows® PC to the docking station USB
port. Download and install the ListenTALK Software
from www.listentalk.com/support. For software
operation details, consult the software help les.
Docking Station | Quick Start Guide
Docking Station - Top and Bottom
ListenTALK
LISTEN TECHNOLOGIES 14912 Heritage Crest Way, Bludale, Utah 84065-4818 USA
Phone: [phone] Toll-Free: 1.800.330.0891 www.listentech.com
Leader Clip Storage USB Port
Wall-Mounting Slots
Power Connector LA-382 Mounts
Handles
Leader Pocket
Participant
Pockets
Pairing
Button
Status
Button
Pairing
Indicator
Status
Indicator
Note: mounting slots and handles are not accessible on Docking Station Case