LiveLife Mobile Alarm Operating and maintenance instructions

Rear of pendant
CHARGING STATION
Before you use the pendant, please place itin the charging station for at
least one hour before using. *Do not use any other power adapter.
When placing the pendant in the charging station make sureitis positioned
correctly. The red light on the charging station should glow brightly.
We recommend you recharge the pendant every night if itis being worn.
When the battery level in the pendant falls below 15-20%itwill send a low
battery warning text message to all people on the emergency contact list.
This can be turned off by sendingit a sms command: LOW0
Charging your pendant
To turn on the pendant- press the side talk button till the pendant vibrates.
The Green and Blue LEDS will flash rapidly. The pendant can also be turned on
automatically by placing itinto the charging station or connecting to the
power via USB cable connected to the side power socket on the pendant.
To turn the pendant off- hold down the SOS button and the side talk button
together till the pendant vibrates. The Green and Blue LEDS go off.
To get an initial fix for the GPS features, use outdoors or near a window so the
pendant can get a fix on the satellites. This could take 10 mins.
Turning on and off & getting a GPS fix
©2016. LiveLife Alarms. All rights reserved.
TIPIf thependant is indoors and cannot get a fix on thesatellites it will attempt to
usethemobile network to fix its location, although this method is not as accurate.
TIPIt is agood idea to keep thecharging station next toyour bed at night. That way
you can have it close by and you can pop it in there each night torecharge.
Quick
Start
Guide
www.livelifealarms.com
LiveLife
PERSONAL MEDICAL ALARMS
Speaker
Charging contacts
SOS/Help button
Microphone
MicroUSBsocket
Side talk button
Front of pendant Side of pendant
Press tomake an outgoing
call toyour second contact
Use this socket tocharge if
not using thecharging station
Introduction Charging station
Red charging LED
.
When thecharging station is plugged in the Red LED
will have a faint glow. When thependant is placed
in it and positioned correctly it will glow brightly.
GPS
MONITORING
3G
WIDEST
COVERAGE
Thependant is waterproof.
Can be worn in shower or rain.
!
.
Do not use any other power sourcetochargethe
device such as acharger for atablet or smartphone
as this will causedamage and void the warranty.

©2016. LiveLife Alarms. All rights reserved.
Quick
Start
Guide
www.livelifealarms.com
LiveLife
PERSONAL MEDICAL ALARMS
Using yourmobile alarm
(2)
When you need help
Press the SOS/Help button
down for 3 to 4 seconds till
you feel a vibration.
This starts the sequence of
help text messages followed
by the outgoing help calls.
Programming of your emergency contacts
We have already pre-programmed your mobile alarm with up to 5 contact numbers. Refer below if you wish to change any of them at any time.
1
How to make changes to emergency contacts.
Finding the location of the pendant using GPS.
Calling the pendant.
Turning fall detection on.
2
Help text messages sent
3
The pendant will send a
help message to all of your
emergency contacts. Mobile
numbers will receive the
exact location of the wearer
on Google Maps or the last
known position.
Barbara.
Help me!
Help call sequence begins
The pendant will then begin to call your
emergency contacts in your chosen order.
The first person to answer is the person
who can talk to you. The wearer listens &
speaks through the pendant. To end the
call and sequence the wearer clicks SOS.
There is a 10 second delay between calls.
ABCDE
You can make changes to the emergency contacts and other settings by sending
simple commands to the mobile number of the pendant via sms. To change any
contact number send these commands to it from amobile phone:
TIPThemobile alarm can call mobiles & landlines. Only people with mobile
phones will receive thetext message with the location on Google Maps. TIPPlease bepatient during thecalling sequence. There can bedelays as the
alarm calls phones which may be out of range or diverted topeople’s voicemail.
A1,8081234567 Send
Person 1
A2,8081234567 Send
Person 2
A3,8081234567 Send
Person 3
A4,8081234567 Send
Person 4
A5,8081234567 Send
Person 5
Do not include spaces in any sms command. Is not case sensitive. The pendant
will respond to each sms command with a reply sms to confirm the change.
To see a summary of your contacts send sms command to the pendant: status
Anyone who knows the mobile number of the pendant can call it and itwill answer
automatically in speakerphone mode.
To find out the location of the pendant send a simple sms command to the pendant:
locSend
The pendant will send areply sms with it’s location or last know position on Google Maps.
To turnfall detection on send sms: To turnfall detection off send sms:
FL1 SendFL0 Send
SOS