128
6
7
3
3
21
1
2
3
9
6
7
8
4
5
4 5
6
1
2
3
4
introDucing th e Pulse™smartPen configure your Pulse™
This guide will get you up and scribing. If you need additional help,
visit us at www.livescribe.com/support or call 1-877-SCRIBE-9.
Pulse™Smartpen
1. Power button
2. Headset jack
3. Built-in microphone
4. Display
5. Speaker
6. USB connector
7. Infrared camera
8. Removable ink cartridge
9. Rechargeable battery
USB Mobile Charging Cradle
1. Nav Plus - navigation control
2. USB smartpen connector
3. Ink cartridge removal ring
Tip: To replace an ink cartridge:
a. Insert the Pulse smartpen tip into
the ink cartridge removal ring.
b. Tilt Pulse smartpen back and pull
up to remove ink cartridge.
Turn on the Pulse smartpen by pressing
the Power button.
Orient your display:
Tap the “left” or “right” button
to orient your display for
left- or right-handed use.
Set the time and date:
a. Tap the “set date” button and use
this printed keypad to enter the date.
Example: Tapping 010108 sets the
date to January 1, 2008.
b. Tap the “set time” button and use
this printed keypad to enter the time.
Example: Tapping 1201PM sets
the time to 12:01PM.
Power button
Left-handed users tap the left button.
Right-handed users tap the right button.
Tip: It is important to set the time and date on your Pulse smartpen because
Paper Replay sessions are time-stamped with the date and time they are created.
exPerience PaPer rePlay™install livescr ibe DesKtoP
Open your Starter notebook to the first page and go through the tutorial.
When you are done, return to this guide.
Paper Replay Basics
Paper Replay Controls
1. Nav Plus - navigation control
2. Recording and Playback controls
3. Jump back/forward
4. Create new bookmark
5. Jump to previous/next bookmark
IMPORTANT: Install Livescribe Desktop before connecting your
USB cradle. If you need additional help, visit us at:
www.livescribe.com/support or call 1-877-SCRIBE-9.
Download and install the Livescribe Desktop software
from www.livescribe.com/install.
IMPORTANT: The Pulse smartpen is designed to
be connected with one computer only. Be sure to
download and install Livescribe Desktop on the
computer where you want your notes to reside.
Once Livescribe Desktop is installed, plug the USB
mobile charging cradle into your computer’s USB port.
Place your Pulse smartpen into the USB cradle. Your
smartpen will begin charging. Fully charging can take
up to 3 hours.
Register your Pulse smartpen when prompted.
IMPORTANT: Registration extends your warranty
and free support from 90 days to 1 year from the
date of purchase. Registration also allows you to
receive important software upgrades, download
new applications, and share your notes through
Livescribe Online.
Read the User Manuals for the Pulse smartpen and
Livescribe Desktop. They can be found under the
Livescribe Desktop Help menu.
Tip: Tap
this button
to check
your battery.
Turn over
6. Position bar - jump to any point
in the session
7. Playback speed
8. Volume controls
5
7
Tap the buttons in this guide
with the tip of your smartpen to hear
additional information.
Tip: The printed buttons in this
guide really work!
8
9
10
123
LS_GSG_WebInstall_B_13
