Living & Co Austin Queen Bed User manual

INSTRUCTION MANUAL
Austin Queen Bedd
AFTER SALES SUPPORT
0800 422 274
NZ
Maximum Weight - 220kgs
207cm
158cm
110cm

1
Assembly Details
AFTER SALES SUPPORT
0800 422 274
NZ
Approximate Assembly Time 2 Person Assembly
Min
Required Assembly Space
Tools Required
60
Floor Area
3m x 3m

2
Please periodically check all things and re-tighten as necessary.
To clean your item, please use a damp cloth and wipe clean.
Never allow any kind of liquid to remain on your furniture.
Please do not place hot items (eg. Hot drinks) directly on to the surface.
Care and maintenance
Tips before you start
1 For the protection of your furniture, we recommend that the product is
placed on a protected surface during assembly to prevent any damage
2 Please check that all parts are present before you start the assembly
of your furniture.
3 For ease and speed of assembly, we recommend that you identify all
the parts required for each step before commencing with assembly.
4 For larger items, please ensure that you have sufficient space and
people (as indicated on page 1) to assemble your product safely.
5 We recommend that, where possible, all items are assembled near
to the area in which they will be placed in use, to avoid moving the
product unnecessarily.
6 During assembly please take care not to over-tighten hardware, as
this may damage the product. Do not use power tools.
7 Always place the product on a steady and stable surface.
8 Do not stand on the product. Do not use the product as a stepladder.
9 This product is intended for indoor, household use only as it is a
non-industrial product.
AFTER SALES SUPPORT
0800 422 274
NZ

3AFTER SALES SUPPORT
0800 422 274
NZ
Part List
Hardware List
12 PCS 21 PC 31 PC
44 PCS 51 PC 62 PCS 76 PCS
8 x E
Bolt
8x10mm
20 x B
Screw
4x16mm
16 x A
Bolt
6x12mm
4 x F
Foot
2 x D
Bracket
2 x C
Bracket
2 x G
Bolt
6x55mm
2 x H
Nut
24 x I
Screw
4x18mm
1 x J
Allen Key
1 x K
Spanner

4
Assembly
AFTER SALES SUPPORT
0800 422 274
NZ
STEP 1
STEP 2
B x 20
E x 8
C x 2
D x 2
Install Bolts (E) into parts 2 and 3, but do not fully tighten.
Slide Parts 1 over the Bolts (E) ensuring the slots of the
brackets hang onto the Bolts (E).
Fix brackets (C and D) using screws (B) to parts 1, as shown.
B
BC
D
1
1
1
2
3
1
C
B
BD
E
E
E
E